CBR messages
Note: Unless explicitly stated, references in this information to
the Peer-to-Peer VTS refers to the 3494 Peer-to-Peer VTS and the TS7700 Virtualization
Engine grid configuration.
- CBR0001I
OAM initialization starting. - CBR0002I
OAM initialization completed. - CBR0003I
Invalid option specified with OSMC= keyword. Parameters specified = parms. Initialization terminated. - CBR0004I
PARMLIB member member not found. Initialization terminated. - CBR0005I
Invalid name specified with APLAN= keyword. Parameters specified = parms. Initialization terminated. - CBR0006D
No DB2 subsystem ID supplied. Reply 'NONE' to continue without DB2, 'C' to cancel OAM, or specify a DB2 SSID. - CBR0007I
Name of OAM DB2 plan not specified. Initialization terminated. - CBR0008I
OAM is already active on this system. Initialization terminated. - CBR0009I
Unable to load user interface module. Initialization terminated. - CBR0010I
Unable to connect to the Optical Configuration Database, RC = return-code. Initialization terminated. - CBR0011I
Unable to disconnect from the Optical Configuration Database, RC = return-code. - CBR0012I
Unable to load OAM cross memory module. Initialization terminated. - CBR0013I
Unable to load OAM CTC I/O driver. Initialization terminated. - CBR0014I
Invalid option "option" specified with keyword {MSG= | OTIS= | UPD= | MOS= | LOB= | QB= | DP=}, for the OAM entry in IEFSSNXX parmlib member. Default option for the keyword is assumed. - CBR0015I
Error loading message module module-name. Default message option (MSG=EM) assumed. - CBR0016I
Successful processing of the {OAMXCF | SETOPT | SETOAM | SETOSMC | ONLYIF | SETDISK | SETTLIB } commands in CBROAMxx member of PARMLIB. Initialization continues. - CBR0017I
OSMA not available, initialization terminated. - CBR0018I
Unable to OPEN the Optical Configuration Database, RC = return-code. Initialization terminated. - CBR0019I
Unable to CLOSE the Optical Configuration Database, RC = return-code. Initialization terminated. - CBR0020I
Error during CTC initialization. Initialization terminated. - CBR0021I
UCB not found for CTC dev. Initialization terminated. - CBR0022I
UCB for device dev does not indicate that it is a CTC device. Initialization terminated. - CBR0023I
Storage unavailable for CTC work area. Initialization terminated. - CBR0024I
Storage unavailable for CTC list. Initialization terminated. - CBR0025I
Invalid option specified with OAM= keyword. Parameters specified = parms. Initialization terminated. - CBR0026I
Invalid option specified with MAXS= keyword. Parameters specified = parms. Initialization terminated. - CBR0027I
SMS is not active on this system. Initialization terminated. - CBR0028I
Error pinning UCB at address address for device device-number. Return code = return-code, Reason code = reason-code. - CBR0029I
Error unpinning UCB at address address for device device-number. Return code = return-code, Reason code = reason-code. - CBR0030I
Unable to load CDS activation listen exit routine. Initialization terminated. - CBR0031I
Unable to establish CDS activation listen exit routine, RC = return-code. Initialization terminated. - CBR0032I
Unable to load OAM Resource Manager. Initialization terminated. - CBR0033I
Unable to establish OAM Resource Manager, RC = return-code. Initialization terminated. - CBR0034I
Unable to load OAM PC Routine for User Swap Control. Initialization terminated. - CBR0035I
Unable to load OAM SRB Routine for User Swap Control. Initialization terminated. - CBR0036I
Unable to load the tape drive offline ENF listen exit routine. Initialization terminated. - CBR0037I
Unable to establish the tape drive offline ENF listen exit routine, RC = return-code. Initialization terminated. - CBR0038I
Invalid option specified with EJECT= keyword. Parameters specified = parms. Initialization terminated. - CBR0039I
Invalid option specified with RESTART= keyword. Parameters specified = parms. Initialization terminated. - CBR0040I
Invalid option specified with UNLOAD= keyword. Parameters specified = parms. Initialization terminated. - CBR0041I
Error opening PARMLIB member member, return code = return-code. Initialization terminated. - CBR0042I
Error(s) discovered during processing of the CBROAMxx member of PARMLIB. Initialization terminated. - CBR0043I
Error closing PARMLIB member member, return code = return-code. Initialization terminated. - CBR0044I
Dynamic {allocation | unallocation} error. Return code = return-code, information reason code = info-reas, error reason code = error-reas. Initialization {terminated | continues}. - CBR0045I
The following num-msgs messages were returned by the MVS dynamic {allocation | unallocation} service. - CBR0046I
SVC-99-message - CBR0047I
Error calling the MVS PARMLIB access service, return code = return-code. Initialization terminated. - CBR0051I
Error calling the EDTINFO service, return code = return-code, reason code = reason-code. - CBR0052I
Error calling the MVS parameter parsing service for a {SETOAM | SETOPT | OAMXCF | SETOSMC | ONLYIF | SETDISK | SETTLIB} statement, return code = return-code. Initialization terminated. - CBR0053I
Error {allocating | unallocating} the logical PARMLIB data set concatenation. IEFPRMLB return code = return-code and reason code = reason-code. Initialization {terminated | continues}. - CBR0054I
OAM has initialized without object tape support. - CBR0060I
Storage unavailable for OVT control block. Initialization terminated. - CBR0061I
Error freeing storage for LCB control block. - CBR0062I
Storage unavailable for LCB control block. Initialization terminated. - CBR0063I
Storage unavailable for ODCB control block. Initialization terminated. - CBR0064I
Storage unavailable for VSCB control block. Initialization terminated. - CBR0065I
Storage unavailable for VCB control block. Initialization terminated. - CBR0066I
Storage unavailable for TVCB control block. Initialization terminated. - CBR0067I
Storage unavailable for {VCB | TVCB} hash table. Initialization terminated. - CBR0070I
OAM XCF member member-name is the first member defined to OAM XCF group group-name, group successfully defined to XCF and member created. - CBR0071I
OAM XCF member member-name successfully created. OAM XCF group is group-name. - CBR0072I
Error attempting to process an XCF {JOIN | LEAVE | QUERY} for OAM XCF member member-name, OAM XCF group group-name, return code = return-code, reason code = reason-code. - CBR0073I
Error updating XCF user state for OAM XCF member member-name, OAM XCF group group-name, return code = return-code, reason code = reason-code. - CBR0074I
OAM XCF member member-name successfully left OAM XCF group group-name. - CBR0075I
Unable to establish a cross memory environment. Initialization terminated. - CBR0076I
OAM XCF member member-name has left OAM XCF group group-name reason {OAM or system failure | normal IXCLEAVE}. - CBR0080I
{IDENTIFY | ATTACH | INITIALIZE} error establishing the {Operator Command Task | Library Control Task | Drive Control Task | OAM Storage Management Component Task | OAM XCF Control Task | Buffer Manager Task | File System Delete Task}. Initialization terminated. - CBR0081I
Error re-establishing the {Operator Command Task | Library Control Task | Drive Control Task | OAM Storage Management Component Task | OAM XCF Control Task | Buffer Manager Task | File System Delete Task}. OAM processing terminates. - CBR0082I
Error detaching the {Operator Command Task | Library Control Task | Drive Control Task | OAM Storage Management Component Task | OAM XCF Control Task | Buffer Manager Task | File System Delete Task}. - CBR0092I
New SMS Source Control Data Set activated. OAM address space restart may be required. - CBR0093E
OAM has initialized without object support. - CBR0094E
OAM has initialized without tape or object support. - CBR0095E
OAM waiting for SMS Control Data Set activation. - CBR0096I
OAM restart in progress. - CBR0097I
OAM restart completed. - CBR0098I
OAM termination starting. - CBR0099I
OAM termination completed. - CBR0100I
Unable to access library table. Return code = return-code, Reason code = reason-code, SQL error code = SQL-error-code, CAF error code = CAF-error-code. - CBR0102I
Invalid number of empty slots slots specified for library library-name. - CBR0104I
Invalid device number dev specified for primary CTC for library library-name. - CBR0105I
Invalid port number port-number specified for primary port for library library-name. - CBR0106I
Invalid device number device-number specified for alternate CTC for library library-name. - CBR0107I
Invalid port number port-number specified for alternate port for library library-name. - CBR0108I
Invalid library type library-type specified for library library-name. - CBR0109I
Invalid path status path-status specified for library library-name. - CBR0110I
Invalid device type device-type specified for library library-name. - CBR0111I
Invalid library index library-index specified for library library-name. - CBR0112I
Invalid library default media type library-default-media-type specified for library library-name. - CBR0113I
Invalid number of MEDIAn scratch volumes, volume-count, specified for library library-name. - CBR0114I
Invalid MEDIAn scratch volume message threshold, message-threshold, specified for library library-name. - CBR0115I
SMS library definitions unavailable. SSI RC = SSI-return-code, SMS RC = SMS-return-code, SMS REASON = SMS-reason-code. - CBR0116I
SMS optical library library-name not found in Optical Configuration Database. - CBR0117I
Invalid default pseudo library name plib-name for library library-name. - CBR0118I
Tape library record for library library-name not found in the searched TCDB. - CBR0119I
Entry default data class for library library-name not available. - CBR0124I
Definition of slot slot-name in library library-name missing. - CBR0125I
Definition of slot slot-name in library library-name created. - CBR0126I
Definition of slot slot-name in library library-name unsuccessful. - CBR0127I
Return code = return-code, Reason code = reason-code, SQL error code = SQL-error-code, CAF error code = CAF-error-code. - CBR0130I
Invalid console name consname associated with library library-name. - CBR0140I
Unable to access drive table. Return code = return-code, Reason code = reason-code, SQL error code = SQL-error-code, CAF error code = CAF-error-code. - CBR0141I
Unknown library name library-name specified for drive drive-name. - CBR0142I
Invalid device number dev specified for CTC for drive drive-name. - CBR0143I
Invalid SCSI bus address bus-address specified for drive drive-name. - CBR0144I
Invalid logical unit number lun specified for drive drive-name. - CBR0145I
Invalid library drive number library-drive-number specified for drive drive-name. - CBR0146I
Invalid number of drives number-of-drives defined as residing in library library-name. - CBR0147I
No optical drive definition was found in the active SMS configuration during OAM initialization. - CBR0149I
Duplicate library drive number library-drive-number specified for drive drive-name. - CBR0150I
Invalid drive type drive-type specified for drive drive-name. - CBR0151I
Invalid device type device-type specified for drive drive-name. - CBR0152I
Drive type drive-type for drive drive-name is inconsistent with library type library-type for library library-name. - CBR0153I
Device type device-type-1 for drive drive-name is inconsistent with device type device-type-2 for library library-name. - CBR0155I
SMS optical drive definitions unavailable. SSI RC = SSI-return-code, SMS RC = SMS-return-code, SMS REASON = SMS-reason-code. - CBR0156I
SMS optical drive drive-name not found in Optical Configuration Database. - CBR0157I
Cannot find real library for standalone drive drive-name. - CBR0161I
Unknown library name library-name specified for storage group storage-group-name. - CBR0162I
Storage group storage-group-name is defined as enabled to more than one system in the SMS ACDS. The storage group is ignored. - CBR0163I
Library library-name is defined as enabled to more than one system in the SMS ACDS. The library is ignored. - CBR0164I
{DRIVE | LIBRARY} vlibdrv-name with device type device type no longer supported by OAM. - CBR0165I
At least one object or object backup storage group has been encountered that is enabled to more than one system in a non-OAMplex environment. The definition of storage groups that are enabled to more than one system in a non-OAMplex environment is allowed due to the specification of SETOPT MULTISYSENABLE(YES) in the CBROAMxx parmlib member. - CBR0168I
Volume location volume-location for volume volser is inconsistent with library type library-type for library library-name. - CBR0169I
Media type media-type for volume volser is inconsistent with device type device-type for library library-name. - CBR0170I
Invalid volume location location associated with volume volser. - CBR0171I
Invalid volume type volume-type associated with volume volser. - CBR0172I
Invalid volume orientation orientation associated with volume volser. - CBR0173I
Invalid volume full status full-status associated with volume volser. - CBR0174I
Invalid volume readable status readable-status associated with volume volser. - CBR0175I
SMS storage group constructs unavailable. SSI RC = SSI-return-code, SMS RC = SMS-return-code, SMS REASON = SMS-reason-code. - CBR0176I
Invalid volume writeable status writeable-status associated with volume volser. - CBR0177I
Invalid volume write protected status protect-status associated with volume volser. - CBR0178I
Invalid volume {free space | overflow free space} free space associated with volume volser. - CBR0179I
Invalid number of deleted objects deleted-objects associated with volume volser. - CBR0180I
Unable to access volume table. Return code = return-code, Reason code = reason-code, SQL error code = SQL-error-code, CAF error code = CAF-error-code. - CBR0181I
Unknown library name library-name specified for volume volser. - CBR0182I
Unknown storage group name storage-group-name specified for volume volser. - CBR0183I
Invalid slot name slot-name specified for volume volser. - CBR0184I
Slot name slot-name does not exist in library library-name, specified for volume volser. - CBR0185I
Invalid volume media type media-type associated with volume volser. - CBR0186I
Invalid volume empty status empty-status associated with volume volser. - CBR0187I
Error determining number of deleted objects and amount of deleted space on volume volser. Return code = return-code Reason code = reason-code SQL error code = SQL-error-code CAF error code = CAF-error-code CAF reason code = CAF-reason-code. - CBR0188I
Invalid amount of deleted space deleted-space associated with volume volser. - CBR0189I
Error updating row in volume table for volume volser. Return code = return-code Reason code = reason-code SQL error code = SQL-error-code CAF error code = CAF-error-code CAF reason code = CAF-reason-code. - CBR0190I
Volume/Slot inconsistent. - CBR0195I
Volume table inconsistent. - CBR0200I
Unable to access TAPEVOL table. Return code = return-code, Reason code = reason-code, SQL code = SQL-code, CAF error code = CAF-error-code. - CBR0201I
Error updating row in TAPEVOL table for tape volume volser. Return code = return-code, Reason code = reason-code, SQL code = SQL-code, CAF error code = CAF-error-code, CAF reason code = CAF-reason-code. - CBR0202I
Invalid tape unit name unit-name associated with tape volume volser. - CBR0203I
Invalid {capacity | overflow capacity} capacity associated with tape volume volser. - CBR0204I
Invalid percentage full percent-full associated with tape volume volser. - CBR0205I
Invalid number of logical blocks written number-logical-blocks associated with tape volume volser. - CBR0206I
Invalid number of {logical kilobytes of data written | overflow logical kilobytes of data written} number-logical-kilobytes associated with tape volume volser. - CBR0207I
Invalid number of {physical kilobytes of data written | overflow physical kilobytes of data written} number-physical-kilobytes associated with tape volume volser. - CBR0208I
Invalid inuse value of in-use associated with tape volume volser. - CBR0209I
Invalid copied value of copied associated with tape volume volser. - CBR0210I
Unknown storage group name storage-group-name specified for tape volume volser in the TAPEVOL table. - CBR0211I
Invalid number of {logical kilobytes of data deleted | overflow logical kilobytes of data deleted} number-logical-kilobytes associated with tape volume volser. - CBR0212I
Invalid volume compaction status compaction-status associated with tape volume volser. - CBR0213I
Invalid data set format value format_value associated with tape volume volser. - CBR0214I
Invalid sublevel value sublevel-value associated with tape volume volser. - CBR0217I
Invalid volume attribute flags value attribute-flags-value associated with tape volume volser. - CBR0220D
Unable to update table-name table due to DB2 error. Reply 'R' to retry or 'I' to ignore the error. - CBR0230D
Multiple object backup storage groups defined. Group group selected. Reply 'U' to use, 'R' to respecify. - CBR0231A
Specify the object backup storage group to be used by OAM. - CBR0232I
Group group is not a valid first object backup storage group name. - CBR0300I
{TAPEUNITNAME | L2TAPEUNITNAME} unit-name contains invalid device types. - CBR0301I
{TAPEUNITNAME | L2TAPEUNITNAME} unit-name not found. - CBR0302I
Keyword keyword-name invalid in a {SETOAM | SETOPT | OAMXCF | SETOSMC | ONLYIF | SETDISK| SETTLIB} statement. - CBR0303I
Data for keyword keyword-name in a {SETOAM | SETOPT | OAMXCF | SETOSMC | ONLYIF | SETDISK | SETTLIB} statement is invalid - data. - CBR0304I
Extra data for keyword keyword-name in a {SETOAM | SETOPT | OAMXCF | SETOSMC | ONLYIF | SETDISK | SETTLIB} statement has been found - data. - CBR0305I
STORAGEGROUP storage-group-name missing ending parenthesis in a {SETOAM | SETOPT | SETOSMC | SETDISK} statement. - CBR0306I
Data for keyword keyword-name is missing in a {SETOAM | SETOPT | OAMXCF | SETOSMC | ONLYIF | SETDISK | SETTLIB} statement. - CBR0307I
STORAGEGROUP storage-group-name specified in a {SETOAM | SETOPT | SETOSMC | SETDISK} statement not found. - CBR0308I
{TAPEUNITNAME | L2TAPEUNITNAME} unit-name contains conflicting tape device types. - CBR0309I
PARMLIB member member is empty. - CBR0310I
PARMLIB member member contains no SETOAM commands. - CBR0311I
A {TAPEUNITNAME | L2TAPEUNITNAME} subparameter has not been specified, or is invalid, for STORAGEGROUP storage-group-name. - CBR0312I
PARMLIB member member contains no valid STORAGEGROUP parameters for the SETOAM command. - CBR0313I
STORAGEGROUP storage-group-name {SGMAXTAPERETRIEVETASKS | MAXTAPERETRIEVETASKS} value (stgp-task-number) is greater than SETOAM MAXTAPERETRIEVETASKS value (setoam-task-number). - CBR0314I
STORAGEGROUP storage-group-name {SGMAXTAPESTORETASKS | MAXTAPESTORETASKS} value (stgp-task-number) is greater than SETOAM MAXTAPESTORETASKS value (setoam-task-number). - CBR0315I
STORAGEGROUP storage-group-name TAPECOMPACTION parameter ignored. {TAPEUNITNAME | L2TAPEUNITNAME} tape-unit-name contains 3480 tape drives without the IDRC feature. - CBR0316I
The {global | storage group} {DATACLASS | L2DATACLASS} dataclass-name is invalid. - CBR0317I
The {global | storage group} TAPEEXPIRATION expiration-date is earlier than current date. - CBR0318I
The {global | storage group} TAPEFULLTHRESHOLD full-threshold is out of range, a default of zero will be used. - CBR0319I
SETOAM command encountered in PARMLIB member member with no keywords. - CBR0320I
PARMLIB member member contains no SETOPT commands. - CBR0321I
SETOPT command encountered in PARMLIB member member with no keywords. - CBR0322I
Max entries for tape esoteric table exceeded - entry xxxx not added - CBR0323I
TAPECAPACITY specified with invalid capacity capacity, TAPECAPACITY for name unitname not accepted. - CBR0324I
TAPECAPACITY specified for 3590 tape device xxxx, tape capacity for 3590 tape devices cannot be changed. - CBR0325I
TAPECAPACITY specified with invalid unitname unitname, command not accepted. - CBR0326I
XCFTIMEOUT parameter missing ending parenthesis. - CBR0327I
PARMLIB member member contains no OAMXCF commands. - CBR0328I
OAMXCF command encountered in PARMLIB member member with no keywords. - CBR0329I
PARMLIB member member contains no valid OAMGROUPNAME parameter for the OAMXCF command. - CBR0330I
PARMLIB member member contains no valid OAMMEMBERNAME parameter for the OAMXCF command. - CBR0331I
PARMLIB member member contains no SETOSMC commands. - CBR0332I
SETOSMC command encountered in PARMLIB member member with no keywords. - CBR0333I
A default FIRSTBACKUPGROUP subparameter has not been specified in PARMLIB member member. - CBR0334I
A default SECONDBACKUPGROUP subparameter has not been specified in PARMLIB member member. - CBR0335I
Group group specified as both a FIRSTBACKUPGROUP and a SECONDBACKUPGROUP in PARMLIB member member. - CBR0336I
Group group, specified as either a FIRSTBACKUPGROUP or a SECONDBACKUPGROUP in PARMLIB member member, is not an object backup storage group. - CBR0337I
All object backup storage groups in configuration defined in SECONDBACKUPGROUP statements in member member of PARMLIB. No object backup storage groups available to be used as a FIRSTBACKUPGROUP. - CBR0338I
Keyword RECALLALL, RECALLOPT or RECALLTAPE specified in a SETOSMC statement is ignored because MAXRECALLTASKS is equal to zero. - CBR0339I
Keyword RECALLALL, RECALLOPT or RECALLTAPE specified in a SETOSMC statement is superseded by a SETOSMC statement for storage group sg_name with RECALLOFF(ON) specified. - CBR0340I
STORAGEGROUP storage_group_name SGMAXREC value (group_max_recyc_tasks) is greater than MAXRECYC value (max_tasks). - CBR0341I
At least one storage group has an SGMAXREC value greater than MAXRECYC value max_tasks - CBR0342I
STORAGEGROUP storage_group_name SGMAXRECYCLETASKS value (stgp_max_tasks) is greater than SETOAM MAXRECYCLETASKS value (setoam_max_tasks). - CBR0343I
A START RECYCLE command is currently active. Operand cannot be set to 0 while there is an active START RECYCLE command. - CBR0344I
Keyword keyword-name invalid when specified with storage group group-name in a {SETOAM | SETOPT | SETOSMC | SETDISK} statement. - CBR0345I
ONLYIF command encountered in PARMLIB member member with no keywords. - CBR0346I
PARMLIB member member contains no ONLYIF commands. - CBR0347I
PARMLIB member member contains no SETDISK commands. - CBR0348I
SETDISK command encountered in PARMLIB member member with no keywords. - CBR0349I
Storage group group_name did not specify both L2TYPE and L2DIR in the SETDISK statement. - CBR0350I
The MULTISYSENABLE setting cannot be changed as a result of an OAM restart. - CBR0351I
{SGMAXTPR | SGMAXTPS} value sg_max_tasks, requested for scope = scope, is greater than the global {MAXTAPERETRIEVETASKS | MAXTAPESTORETASKS} value global_max_tasks. The F OAM,UPDATE,SETOAM command failed. - CBR0355I
PARMLIB member member contains no SETTLIB commands. - CBR0356I
SETTLIB command encountered in PARMLIB member member with no keywords. - CBR0400I
OSREQ {ACCESS | CHANGE | DELETE | QUERY | RETRIEVE | STORE | UNACCESS} successful. Return code = return-code, reason code = reason-code. - CBR0401I
OSREQ {ACCESS | CHANGE | DELETE | QUERY | RETRIEVE | STORE | UNACCESS | STOREBEG | STOREPRT | STOREEND} unsuccessful. Return code = return-code, reason code = reason-code. - CBR0402I
Error parsing OSREQ command, return code = return-code. - CBR0403I
Error {obtaining | releasing} buffer for OSREQ {QUERY | RETRIEVE | STORE | COMPARE} operation, return code = return-code. - CBR0404I
OSREQ {ACCESS | CHANGE | DELETE | QUERY | RETRIEVE | STORE | UNACCESS} response time is milliseconds milliseconds. - CBR0405I
OSREQ {RETRIEVE | STORE} data rate is data-rate kilobytes/second. - CBR0406I
LENGTH keyword and value required for OSREQ STORE request. No LENGTH specified. - CBR0407I
Invalid object length object-length specified on OSREQ {RETRIEVE | STORE | COMPARE} request. - CBR0408I
Invalid object offset object-offset specified on OSREQ {RETRIEVE | COMPARE} request. - CBR0410I
Collection name = col-name - CBR0411I
Object name = obj-name - CBR0412I
Object size = obj-size - CBR0413I
Creation date = creation-date - CBR0414I
Creation timestamp = creation-time - CBR0415I
Last referenced date = reference-date - CBR0416I
Expiration date = expiration-date - CBR0417I
Management class = management-class - CBR0418I
Storage class = storage-class - CBR0419I
*************** - CBR0420I
Data comparison for object collection-name object-name successful. - CBR0421I
Data comparison for object collection-name object-name unsuccessful. Incorrect data starting at offset decimal-offset ('hex-offset'X). - CBR0422I
Data for {primary | backup | backup2} copy of object collection-name object-name follows. - CBR0423I
oooooooo = aaaaaaaa bbbbbbbb cccccccc dddddddd *AAAA BBBB CCCC DDDD* - CBR0424I
The following message was received from the OSREQ macro: - CBR0425I
message-received-from-the-OSREQ- macro - CBR0426I
DB2 CAF {CLOSE | OPEN} function issued a return code of return-code and reason code of reason-code. - CBR0427I
Primary retrieve key = 'primary_retrieve_key'X - CBR0428I
Backup retrieve key ='backup-retrieve-key'X - CBR0429I
Backup2 retrieve key = 'backup2-retrieve-key'X - CBR0430I
Estimated retrieve time = estimated-ret-resp-time - CBR0431I
Error parsing OAMUTIL command, return code = return-code. - CBR0432I
REFORMAT rejected. {Old volume serial number not specified | NEWVOL2 only valid for both side request | SCRATCH only valid for both side request | Invalid old volume serial number specified}. - CBR0433I
{REFORMAT | LISTVDIR} unsuccessful. OAM return code = return-code, reason code = reason-code. - CBR0434I
{REFORMAT | CHGCOL | LISTVDIR} successful. - CBR0435I
CHGCOL rejected due to invalid specification. - CBR0436I
CHGCOL unsuccessful for collection collection-name. {Collection not found in catalog | Error returned from catalog alter | Catalog error occurred | Collection not found in DB2 | Error attempting to locate collection in DB2 | Error attempting to delete collection in DB2 | Error defining collection to DB2 | Error returned from DB2 services | Error returned from PC routine | Internal error occurred when processing CHGCOL request | OLDSCN does not match catalog | OLDSCN does not match DB2 | OLDMCN does not match catalog | OLDMCN does not match DB2 | SGN does not match catalog | SGN does not match DB2}. Return code = return-code, Reason code = reason-code. - CBR0437I
OAMUTIL CHGCOL request for collection collection-name has caused the catalog and DB2 to be out of synch. - CBR0440I
OSREQ {RETRIEVE | STORE} successful. Return code = return-code, reason code = reason-code, retcode2 = recall-return-code - CBR0441I
OSREQ {RETRIEVE | STORE} unsuccessful. Return code = return-code, reason code = reason-code, retcode2 = recall-return-code - CBR0442I
When specifying the DATA option for objects with a size greater than 256 MB, the LENGTH and OFFSET keywords and values are required for the {RETRIEVE | COMPARE} function. - CBR0443I
Location = location-flag - CBR0444I
Pending action date = pending-action-date - CBR0445I
Status flags = status-flags - CBR0446I
Retention protect date = retention-protect-date - CBR0447I
Deletion protected = deletion-protect-mode - CBR0800I
GETMAIN error for the cblock control block, in module modname, RC = rcode, subpool = subpool, length = length. - CBR0801I
FREEMAIN error for the cblock control block, in module modname, RC = rcode, subpool = subpool, length = length. - CBR1300I
LABEL rejected. No media-type drive defined. - CBR1301I
LABEL rejected. No media-type drive usable. - CBR1302I
LABEL rejected. Optical disk drive drive-name is not defined in the active SMS configuration. - CBR1303I
LABEL rejected. Optical disk drive drive-name is library-resident. - CBR1304I
LABEL rejected. Optical disk drive drive-name is {offline | pending offline | not operational}. - CBR1305I
LABEL rejected. Pseudo library name p-library is not defined in the active SMS configuration. - CBR1306I
RELABEL not allowed for volume old_volser. {Write protected | Eject requested | Duplicate request | Reformat requested | Object Backup volume | Write scheduled | Active object found | DB2 Volume table error | DB2 Object Directory table error | Reinit scheduled | LMSI media}. - CBR1307I
LABEL rejected. Library p-library is not a pseudo optical library. - CBR1308I
RELABEL volume old_volser rejected. Optical disk drive drive-name is {offline | pending offline | not operational | not defined | library resident | write protected}. - CBR1309I
{RELABEL | RL} rejected. {No usable drive | Invalid old volume serial number}. - CBR1310I
Label rejected. Library libname in remap mode; no other drives capable. - CBR1311I
Unable to {connect | disconnect} DB2 Object Directory database. RC = return-code. Relabel terminated. - CBR1312I
RELABEL volume old_volser rejected. New volume serial number new_volser is invalid. - CBR1313I
RELABEL volume old_volser rejected. New VOLSER new_volser already exists. Duplicate {optical | tape | DASD} volume. - CBR1314I
The specified drive name drive-name for RELABEL command is ignored. Volume old_volser is library resident. - CBR1400I
STOP rejected. Component name name invalid. - CBR1500I
START rejected. Component name name invalid. - CBR1600I
VARY rejected. Drive or library name name undefined. - CBR1601I
VARY rejected. Status status invalid. - CBR1602I
Drive drive-name already status. - CBR1603I
Library library-name already status. - CBR1604I
VARY rejected. Cannot demount volume on drive drive-name. - CBR1605I
VARY rejected for {LIBRARY | DRIVE} lib-drv-1. Associated resource {LIBRARY | DRIVE} lib-drv-2 currently being controlled by member-name instance of OAM. - CBR1610I
Drive drive-name in library library-name online and operational. - CBR1611D
Reply 'U' to VARY library library-name OFFLINE, 'C' to cancel. - CBR1612I
VARY library library-name OFFLINE command canceled. - CBR1620I
Requesting SVC dump for OAM address space. - CBR1621I
Requesting SVC dump for OAM address space and ASIDs: asid1 asid2 asid3 asid4 asid5 asid6 asid7 asid8 asid9 asid10 asid11 asid12 asid13 asid14 - CBR1622I
Requesting SVC dump for OAM address space and job names: jobn1 jobn2 jobn3 jobn4 jobn5 jobn6 jobn7 jobn8 jobn9 jobn10 jobn11 jobn12 jobn13 jobn14 - CBR1623I
SVC dump processing completed successfully. - CBR1624I
SVC dump processing completed unsuccessfully. Return code = return-code Reason code = reason-code. - CBR1625I
SVC dump processing completed, not all data could be captured. - CBR1626I
DUMP command execution failed. Invalid address space identifier (ASID) specified with the ASID operand. Invalid ASID = asid. - CBR1627I
DUMP command execution failed. Invalid job name specified with the JOBN operand. Invalid job name = jobname. - CBR1628I
More than 14 ASIDs or job names specified on DUMP command, the first 14 will be included. - CBR1650I
Optical volume record for volume volser updated. - CBR1651I
Tape volume record for volume volser updated. - CBR1700I
Optical waiting sum: - CBR1709I
Unrecognized operand on query command, operand = operand. - CBR1710I
Tape object waiting sum: - CBR1715I
Tape lib waiting sum: - CBR1720I
Optical active sum: - CBR1725I
File system waiting sum: text - CBR1730I
Tape object active sum: - CBR1735I
Tape library active sum: - CBR1740I
REMAP request for optical library library-name, for user userid, waiting to be processed, request = request. - CBR1741I
REMAP request for optical library library-name, for user userid, in process, request = request. - CBR1742I
count active requests found. - CBR1743I
count waiting requests found. - CBR1745I
File system active sum: text - CBR1750I
Reading object object-name, in collection collection-name, from optical volume volser, in library lib-name, offset = offset, length = length, request = request, source = source-member, target = target-member. - CBR1751I
Writing object object-name, in collection collection-name, to optical volume volser, in library lib-name, length = length, request = request, source = source-member, target = target-member. - CBR1752I
Deleting object object-name, in collection collection-name, from optical volume volser, in library lib-name, length = length, request = request. - CBR1753I
Auditing optical volume volser, in library lib-name, for user userid, request = request. - CBR1754I
Ejecting optical volumes volser-A and volser-B from library lib-name, for user userid. - CBR1755I
Optical cartridge entry processing in process on optical drive drive-name, in library lib-name, request = request. - CBR1756I
Optical cartridge label processing in process on optical drive drive-name, request = request. - CBR1760I
Read request for object object-name, in collection collection-name, from optical volume volser, in library lib-name, offset = offset, length = length, waiting to be processed, request = request, source = source-member, target = target-member. - CBR1761I
Write request for object object-name, in collection collection-name, to {volume | storage group | library} name, length = length, waiting to be processed, request = request, source = source-member, target = target-member. - CBR1763I
Audit request for optical volume volser, in library lib-name, for user userid, waiting to be processed, request = request. - CBR1764I
Eject request for optical volumes volser-A and volser-B, in library lib-name, for user userid, waiting to be processed. - CBR1765I
Optical cartridge entry processing for optical library lib-name, waiting to be processed, request = request. - CBR1766I
Optical cartridge label processing for keyword keyword waiting to be processed, request = request. - CBR1767I
Optical cartridge label processing for drive drive-name waiting to be processed, request = request. - CBR1770I
Reading object object-name, in collection collection-name, from tape volume volser, offset = offset, length = length, request = request, source = source-member, target = target-member. - CBR1771I
Writing object object-name, in collection collection-name, to tape volume volser, length = length, request = request. - CBR1773I
Auditing tape volume volser in library lib-name for user userid, request = request. - CBR1774I
Ejecting tape volume volser from library lib-name for user userid. - CBR1775I
Tape cartridge entry request in process on library lib-name. - CBR1780I
Read request for object object-name, in collection collection-name, from tape volume volser, offset = offset, length = length, waiting to be processed, request = request, source = source-member, target = target-member. - CBR1781I
Write request for object object-name, in collection collection-name, to tape in storage group sg-name, waiting to be processed, length = length, request = request. - CBR1783I
Audit request for tape volume volser in library lib-name for user userid waiting to be processed, request = request. - CBR1784I
Eject request for tape volume volser in library lib-name for user userid waiting to be processed. - CBR1785I
number tape cartridge entry requests for library lib-name waiting to be processed. - CBR1790I
Read request for object object-name, in collection collection-name, with instance id inst-id, in file system directory dir-name, offset = offset, length = length, waiting to be processed, request = request. - CBR1791I
Write request for object object-name, in collection collection-name, in file system directory dir-name, length = length, waiting to be processed, request = request. - CBR1792I
Reading object object-name, in collection collection-name, with instance id inst-id, in file system directory dir-name, offset = offset, length = length, request = request. - CBR1793I
Writing object object-name, in collection collection-name, in file system directory dir-name, length = length, request = request. - CBR1800I
resource-name VARY completion notification error. SSI RC = SSI-return-code, SMS RC = SMS-return-code, SMS REASON = SMS-reason-code. - CBR1900I
START OAM rejected. OAM address space already active. - CBR1910I
verb rejected. {OAM address space not started. | OAM1 subsystem not initialized.} - CBR1920I
verb not scheduled. Command scheduling error. - CBR1930I
verb command execution failed. - CBR1950I
Installation exit exit-name has been reset. - CBR1951I
Installation exit exit-name {was | has been} disabled by operator command. - CBR1990I
OAM diagnostic messages started for OSREQFS. Limit = nnnn. - CBR1991I
OAM diagnostic messages will no longer be issued for OSREQFS. - CBR1992I
OAM diagnostic messages reset for OSREQFS. Limit = nnnn. - CBR1993I
OAM diagnostic messages already stopped for OSREQFS. - CBR1000I
OAM verb command execution scheduled. - CBR1010I
OAM verb command execution failed. - CBR1020I
Processing LIBRARY command: command. - CBR1040I
Extraneous parameter {BACKUP1 | BACKUP2} ignored for recovery of backup volume volser. - CBR1041I
RECYCLE START command rejected. Scope scope invalid. - CBR1042I
RECYCLE START command rejected. DISPLAY and LIMIT operands are mutually exclusive. - CBR1043I
RECYCLE START command rejected. Invalid value value specified for operand operand. - CBR1044I
RECYCLE START command rejected. Invalid operand operand specified. - CBR1045I
TSL is invalid for scope scope. - CBR1050I
Command rejected. Verb verb invalid. - CBR1051I
Command rejected. Invalid syntax. - CBR1052I
Command rejected. Operand operand too long. - CBR1053I
Command rejected. Operand operand extraneous. - CBR1054I
Command rejected. Required operand missing. - CBR1055I
Command rejected. Operand operand invalid. - CBR1056I
Command rejected. L= operand invalid for verb verb. - CBR1057I
Command rejected. Invalid L= operand. - CBR1058I
Command rejected. Invalid device range specified. - CBR1059I
Command rejected. Library name library-name is not appropriate. - CBR1060I
Command rejected. Library name library-name undefined. - CBR1061I
Command rejected. Drive name drive-name undefined. - CBR1062I
Command rejected. Storage group name sgname undefined. - CBR1063I
Command rejected. Volume serial number volser invalid. - CBR1064I
Command rejected. Volume serial number volser undefined. - CBR1065I
Command rejected. Invalid operand operand for vol-type volume update. - CBR1066I
Command rejected. Invalid value value for operand operand. - CBR1067I
Command failed. DB2 update unsuccessful for volume volser. - CBR1068I
Command failed. Resource resource currently being controlled by member-name instance of OAM. - CBR1069I
Command rejected. OAM is not a member of an XCF group in a sysplex environment. - CBR1070I
Command rejected. OAM termination in progress. - CBR1071I
Command rejected. OSMC is not installed. - CBR1072I
Command rejected. OAM initialization in progress. - CBR1073I
Command rejected. OSMC is not active. - CBR1074I
Update successful for {SETOAM | SETOPT | SETOSMC} parameter parameter, new value new-value, scope {ALL | groupname}. The previous value was old-value. - CBR1075I
{GLOBAL | groupname} value for keyword is value - CBR1076I
Update successful for OAMXCF parameter parameter, new value new-value. The previous value was old-value. - CBR1077I
Command rejected. Library library-name in which volume resides is not online and operational. - CBR1078I
Command rejected. {CBRUXENT Cartridge Entry | CBRUXEJC Cartridge Eject} Installation Exit is disabled. - CBR1079I
Command rejected. Volume volser is not in a library. - CBR1080I
Device dev not found. - CBR1081I
Device device-number is not a {library-resident | tape} drive. - CBR1082I
Device device-number now has cartridge loader scratch media type of {UNKNOWN | NONE | ANY | MEDIAn}. - CBR1083I
Cartridge loader scratch media type cannot be changed on device device-number. {Device not online | Incompatible media type | Device assigned elsewhere | Device has no cartridge loader | Operand invalid for library type}. - CBR1084I
No MEDIAn scratch volumes available in library library-name. - CBR1085I
Entry of volume volser into library library-name failed. error-text. - CBR1086I
LIBRARY LMPOLICY results for volume volser: result-text. - CBR1087I
Command rejected. Invalid request for scratch volume. - CBR1088I
Command rejected. Function not supported in library library-name. - CBR1090I
OAM Access Backup processing started for reason using the {1st | 2nd} backup copy. - CBR1091I
OAM Access Backup processing stopped for reason. - CBR1092I
OAM Access Backup processing already started for reason using the {1st | 2nd} backup copy. - CBR1093I
OAM Access Backup processing already stopped for reason. - CBR1094I
There are no GLOBAL values for the SETDISK statement. - CBR1097I
The asterisk of the wildcard storage group name of sgname is not in the rightmost position in a F OAM,START,STORGRP command. The command failed. - CBR1098I
A scheduling error occurred after a total of nnnn storage groups that matched the specified wildcard name of sgname were scheduled for OSMC processing. - CBR1099I
No valid object or object backup storage group name matched the specified wildcard name of sgname. - CBR1100I
OAM status: - CBR1110I
OAM library status: - CBR1115I
No libraries defined to OAM. - CBR1120I
OAM drive status: - CBR1125I
No drives defined to OAM. - CBR1130I
OAM storage group status: - CBR1135I
No storage groups defined to OAM. - CBR1140I
OAM volume status: - CBR1154I
{OPTICAL | TAPE} volume volser is a lost volume. - CBR1155I
Total number of {OPTICAL | TAPE} volumes marked lost is count. - CBR1180I
OAM tape volume status: - CBR1190I
DISPLAY rejected. Resource type resource-type invalid. - CBR1200I
EJECT rejected. Volume volser not in a library. - CBR1201I
EJECT rejected. Volume volser-1 or volser-2 busy. - CBR1202I
EJECT rejected. Library library-name cannot eject volume volser. - CBR1203I
EJECT rejected. Operand operand invalid. - CBR1204I
EJECT rejected. Volume volser-1 or volser-2 EJECT already in process. - CBR1210I
EJECT rejected. Volume volser is mounted on nonoperational drive drvname. - CBR1211I
Volume volser is not an optical volume. Use the LIBRARY EJECT command. - CBR1212I
EJECT rejected. Volume volser not tape, but operand operand implies tape. - CBR1213I
EJECT rejected. Volume volser not optical, but operand operand implies optical. - CBR1214I
EJECT rejected. Operand operand1 conflicts with operand operand2. - CBR1220I
Tape drive status: - CBR1240I
Object tape vol status: - CBR1250I
OAM XCF status: - CBR1280I
Library library-name request. - CBR2000I
Volume volser marked unwritable. - CBR2001I
Volumes volser-1 and volser-2 not found in library library-name. - CBR2002I
Cross-memory copy error between OAM address space and ASID asid. - CBR2003I
Tape volume volser not found. Volume has been marked lost. - CBR2004I
Tape volume volser marked unwritable. - CBR2100I
Volumes volser-1 and volser-2 entered into library library-name. - CBR2101I
Optical disk entry into library library-name failed. - CBR2102I
LABEL function complete for volumes volser-1 and volser-2. - CBR2103I
LABEL function on drive drvname failed. - CBR2104I
Drive drive-name now online. - CBR2105I
Drive drive-name VARY ONLINE failed. - CBR2106I
Drive drive-name now offline. - CBR2107I
Drive drive-name VARY OFFLINE failed. - CBR2108I
Undefined drive library-drive-number varied offline in library library-name for library/host synchronization. - CBR2109I
Unable to do I/O to drive drive-name. Library data for owning library, library-name, unavailable during library initialization. - CBR2150I
Volume table update for volume volser failed during delete processing. - CBR2151I
Volumes volser-1 and volser-2 will be reinitialized on their next mount and have been returned to OAM scratch status. - CBR2152I
Retrieve from Deleted Objects Table for volume volser failed. - CBR2153I
All objects on volumes volser-1 and volser-2 have expired, shelf location shelf-loc. - CBR2154I
Volumes volser-1 and volser-2 will be reinitialized on their next mount and will remain assigned to storage group stor_group. - CBR2155I
Deleted space and deleted object count update for volume volser failed. - CBR2156I
Delete from Volume table for volumes volser-1 and volser-2 failed. - CBR2158I
Eject failed for volumes volser-1 and volser-2, Return Code=return-code. - CBR2159I
Volume table update for volumes volser-1 and volser-2 failed during reinitialization. - CBR2160I
Reinitialization for volumes volser-1 and volser-2 failed. - CBR2161I
Internal failure of deletes before write or defragmentation processing, volume volser. - CBR2162I
Update of the number of logical kilobytes of data deleted from tape volume volser failed. - CBR2163I
TAPEVOL table row for tape volume volser not found. - CBR2164I
Tape volume volser has had all objects expired or deleted and has been returned to OAM scratch status. - CBR2165I
Tape volume volser has had all objects expired or deleted and can be returned to the MVS scratch pool. - CBR2166I
Tape volume volser has had all objects expired or deleted and will remain assigned to storage group group-name. - CBR2167I
Delete from TAPEVOL table for volume volser failed. - CBR2168I
TAPEVOL table update for volume volser failed. - CBR2169I
Volumes volser-1 and volser-2 have completed reinitialization processing and have been returned to OAM scratch status. - CBR2170I
Volumes volser-1 and volser-2 have completed reinitialization processing and will remain assigned to storage group stor_group. - CBR2171E
DFSMSrmm tape volume installation exit (EDGTVEXT) disabled due to an installation exit abend. - CBR2172I
Abend xxxx occurred in the DFSMSrmm tape volume exit (EDGTVEXT). - CBR2173I
WORM tape volume volser has had all objects expired or deleted. - CBR2174I
Reinitialization for volume volser failed, volume has not demounted. - CBR2180I
Abend xxxx occurred in the mmmmmmmm exit module. Dynamic exit name = eeeeeeee, Abend reason code = ssss. - CBR2181I
Error occurred when invoking the MVS Dynamic Services (CSVDYNEX). - CBR2182I
Unable to obtain storage for the CBRUXSPL parameter list. - CBR2183I
Unable to establish an ESTAE recovery environment for DFSMSrmm tape volume exit (EDGTVEXT). ESTAE RC = return-code. - CBR2200I
Scratch volumes volser-1 and volser-2 added to storage group storage-group-name. - CBR2201I
Scratch tape volume volser added to storage group storage-group-name. - CBR2210I
No empty slots in library library-name. Disk to be ejected. - CBR2211E
Enter an optical disk into library library-name to relieve the out of space condition in storage group storage-group-name. - CBR2212E
Use the OAM LABEL command to label optical disks for shelf use to relieve the out of space condition in storage group storage-group-name. - CBR2213I
No space left in storage group storage-group-name. - CBR2214I
No space left on any tape volume in storage group storage-group-name. - CBR2217E
Enter an optical disk cartridge that is compatible with DEFAULT MEDIA TYPE library-default-media-type and write compatible with optical drive device type drive-device-type into library library-name to relieve the out of space condition in storage group storage-group-name. - CBR2500I
No drive usable for optical disk entry into library library-name. - CBR2501I
Optical disk entry into library library-name rejected. OAM termination in progress. - CBR2502I
Optical disk entry into library libname rejected. Library not operational. - CBR2503I
Optical disk entry into library libname rejected. Library offline. - CBR2504I
Optical disk entry into library libname rejected. Library pending offline. - CBR2505I
Optical disk entry into library libname rejected. Library remap pending or in progress. - CBR2506I
Optical disk entry into library libname rejected. Zero control block address. - CBR2507I
Optical disk entry into library libname rejected. I/O station not operational. - CBR2508I
Optical disk entry into library libname rejected. Queueing routine abended. - CBR2510I
Volume Entry Scheduler failure for library library-name. - CBR2550I
Optical disk entry into library library-name scheduled. - CBR2600A
Specify shelf location for volumes volser-1 and volser-2. - CBR2601A
Specify shelf location for volume volser. - CBR2602A
Eject pending for volser in r-library. Default pseudo library is p-library. Reply 'U' to use, 'R' to respecify. - CBR2603A
Specify pseudo library name for volume volser. - CBR2604I
Volume volser cannot be assigned to pseudo library p-library-name, it is not a valid pseudo library definition in the active SMS configuration. - CBR2610I
Volume Eject Scheduler failure for volume volser. - CBR2612I
Eject request rejected for volume volser. TCDB access error occurred. - CBR2613I
Eject request rejected for volume volser. Library library-name not defined. - CBR2614I
Eject request rejected. Volume volser is already scheduled to be ejected. - CBR2615I
Eject request rejected. Attempt to add request for volume volser to internal queue failed. - CBR2616I
Eject request rejected for volume volser. Unable to obtain storage for volume record. - CBR2617I
Eject request rejected for volume volser. Installation exit (CBRUXEJC) disabled. - CBR2700I
Volume volser in library library-name audit complete. - CBR2701I
Volume list audit complete. - CBR2702I
Library library-name audit complete. - CBR2703I
Audit request rejected. Audit for volume volser has already been scheduled. - CBR2704I
Audit request rejected for volume volser. Library library-name is not online and operational. - CBR2705I
Audit request rejected. Volume volser is not library resident. - CBR2706I
Audit request rejected. Volume information was not found for volume volser. - CBR2707I
Audit request rejected. Volume serial number volser is not valid. - CBR2708I
Audit request rejected. Volume volser is scheduled to be ejected. - CBR2709I
Audit request rejected. An attempt to obtain storage failed. - CBR2710I
Audit terminated while auditing volume volser. An error in library library-name detected. - CBR2711I
Audit request rejected for volume volser. Remap for library library-name requested. - CBR2712I
Audit request rejected for volume volser. TCDB access error occurred. - CBR2714I
Audit request rejected for volume volser. Library library-name has no available drives. - CBR2715I
Audit request rejected for volume volser. Library library-name is in manual mode. - CBR2716I
Audit request rejected for volume volser. Library library-name vision system inoperative. - CBR2717I
Audit request rejected. Attempt to add request for volume volser to internal queue failed. - CBR2718I
Audit request rejected. Volume volser has the wrong media type for audit processing. - CBR2732I
Volume list audit requests for volumes in library library-name canceled. Library unavailable. - CBR2737I
The OAM address space is terminating. Pending audits for this request will be canceled. - CBR2738I
Audit request rejected for volume volser in library lib-name. A system service failure occurred. - CBR2739I
Audit request rejected for volume volser. Library lib-name is not defined. - CBR2740I
Audit request rejected for library library-name. reason. - CBR2741I
Audit request for library library-name successfully scheduled. - CBR2742I
Audit request for volume volser successfully scheduled. - CBR2743I
Audit request for volume list successfully scheduled. - CBR2744I
Partial audit for library library-name successfully scheduled. - CBR2745I
Partial audit request for volume list successfully scheduled. - CBR2746I
No volumes in library library-name scheduled for audit. - CBR2747I
No volumes in volume list scheduled for audit. - CBR2748I
Remap request for library library-name successfully scheduled. - CBR2749I
Remap request rejected for library library-name. reason. - CBR2750I
Volume list audit request rejected. Volume volser1 is optical and volume volser2 is tape. - CBR2751I
Audit request rejected for volume volser in library library-name. Library is a manual library. - CBR2762I
Audit request rejected. Volume volser media type is not compatible with library library-name. - CBR2780I
Remap failed. Unable to demount drive drive-name in library libname. - CBR2781I
Remap failed for library libname. OAM internal error. - CBR2785I
Demount failure for volumes volser-1 and volser-2, drive drive-name. Remap proceeding. - CBR2811I
REFORMAT volume old_volser rejected. New volume serial number new_volser invalid. - CBR2812I
REFORMAT volume old_volser rejected. New VOLSER new_volser already exists. Duplicate {optical | tape | DASD} volume. - CBR2813I
REFORMAT volume old_volser rejected. {Invalid volume serial number | Volume not defined}. - CBR2814I
REFORMAT volume old_volser rejected. Optical disk drive drive_name is {offline | pending offline | not operational | not defined | library resident | write protected | not compatible}. - CBR2815I
The specified drive name drive-name for REFORMAT is ignored. Volume old_volser is library resident. - CBR2816I
REFORMAT not allowed for volume old_volser. Error condition = {write protected | eject scheduled | relabel scheduled | reformat scheduled | Object Backup volume | write scheduled | active object found | DB2 volume table error | DB2 object directory table error | reinit scheduled | LMSI media}. - CBR2819I
Unable to {connect | disconnect} DB2 Object Directory database. RC = return-code. Reformat terminated. - CBR2822I
RELABEL function completed for volume old_volser to new_volser. - CBR2823I
RELABEL function failed for volume old_volser to new_volser. - CBR3000I
Storage unavailable for LTCB control block. Library initialization terminated. - CBR3001A
Remove cartridge from I/O station on library library-name. Place in shelf location shelfloc. - CBR3002E
Library library-name no longer usable. - CBR3003I
Library library-name now offline. - CBR3004I
Library library-name now online. - CBR3005A
Remove entered cartridge from I/O station on library library-name. Another cartridge waiting to be ejected. - CBR3006I
Library library-name with Library ID library-ID unknown in I/O configuration. - CBR3007I
Power on sequence completed in library library-name. Check the status of the library and drives. - CBR3008E
Library library-name has serial number serial-number and model number model-number, which does not match the model number model-number defined in the Library Table. - CBR3009I
The CE maintenance mode has been {entered | exited} on library library-name. - CBR3010I
Volume volser ejected from library library-name. Place in shelf location shelfloc. - CBR3011I
Secure checkpoint volume volser ejected from library library-name. Place in shelf location shelfloc. - CBR3012I
Volume volser ejected from library library-name. - CBR3013I
Secure checkpoint volume volser ejected from library library-name. - CBR3014I
Eject processing completed for volume volser. Reentry into library library-name detected. - CBR3016I
VTS distributed library library-name may be offline only to host. - CBR3017I
VTS distributed library library-name incorrectly defined to tape storage group storage-group-name. - CBR3018I
LIBSERV did not return any tape device pools for library library-name. - CBR3090I
Null mount time detected in module modname - CBR3100I
Jam in library library-name, fault code nnn. - CBR3101I
No slot available to store the cartridge in library library-name. - CBR3102I
Hardware component unusable in library library-name. Service required, fault code nnn. - CBR3103I
Slot slot-name in library library-name indicates it is full, fault code nnn. - CBR3104I
Drive drive-number in library library-name failed to load, fault code nnn. - CBR3105I
Drive drive-number in library library-name failed to unload, fault code nnn. - CBR3106I
Tables describing library library-name may be invalid, fault code nnn. - CBR3107W
OAM I/O driver could not obtain storage while processing for name. - CBR3108I
Invalid parameter list to the OAM I/O driver for name. - CBR3109I
The OAM I/O driver was unable to establish an ESTAE while processing for name. - CBR3110I
An I/O error occurred on the channel to channel adapter unit-number, error code error-code. - CBR3111I
The OAM I/O driver timed out because a {Library | Drive} command for lib/drv-name was rejected. - CBR3112I
OAM I/O driver abended with a code of xxx when issuing a command for name. - CBR3113I
Drive drive-number in library library-name not operational. - CBR3114I
Single-sided cartridge in library library-name invalid. - CBR3115I
The OAM I/O driver timed out waiting for a response from {Library | Drive} library-name/drive-name. - CBR3116I
J33 missing in the plug panel for library library-name. - CBR3117I
Channel to channel adapter unit-number OFFLINE. - CBR3120I
Unable to obtain fault status for library library-name. Error recovery canceled. - CBR3122I
Volumes volser-1 and volser-2 were ejected from library library-name, shelf location is shelfloc. - CBR3123I
Eject of volumes volser-1 and volser-2 from library library-name failed. - CBR3124I
Eject of volume volser on drive drive-name in library library-name pending. - CBR3126I
Unable to schedule {mount | demount | flip | enter | eject | start | stop | audit | remap | export completion} request to library library-name, {I/O station not operational | ESTAE failure | STORAGE OBTAIN failure}. - CBR3127I
Volumes volser-1 and volser-2 were ejected from library library-name. - CBR3130I
Library adapter not responding for library library-name. - CBR3131I
Library adapter function call unknown to library library-name. - CBR3132I
Library adapter function call rejected. No acknowledgement from library library-name. - CBR3133I
Library adapter function call rejected. Library library-name not responding. - CBR3134I
Library library-name communications not enabled. - CBR3135I
Library adapter function call unknown error using library library-name. - CBR3136I
Library adapter function call internal error using library library-name. - CBR3137I
Incomplete message sent from library library-name. - CBR3198I
Offline or unknown status status from library library-name. - CBR3199I
Unsupported fault code for library library-name. - CBR3200I
A permanent error occurred in Library library-name, status status, fault code fff, failing command command. - CBR3201I
The I/O station in library library-name is no longer usable. - CBR3202I
Invalid command command to library library-name status status. - CBR3203I
Interrupt control circuitry fault on library library-name. - CBR3204I
Multiple timer interrupt fault in library library-name. - CBR3205I
Gripper 1 rear limit sensor fault in library library-name. - CBR3206I
Gripper 2 rear limit sensor fault in library library-name. - CBR3207I
Gripper front sensor fault in library library-name. - CBR3208I
Gripper full sensor fault in library library-name, fault code nnn. - CBR3209I
Full sensor fault on drive drive-number in library library-name, fault code nnn. - CBR3210I
Disk load solenoid fault on drive drive-number in library library-name. - CBR3211I
Both grippers failed fault in library library-name. - CBR3212I
Gripper undetermined fault in library library-name. - CBR3213I
Gripper 1 limit sensor fault in library library-name. - CBR3214I
Gripper 2 limit sensor fault in library library-name. - CBR3215I
Electronic Self Test failed. Output port 1 in library library-name. - CBR3216I
Electronic Self Test failed. Output port 2 in library library-name. - CBR3217I
Electronic Self Test failed. Output port 3 in library library-name. - CBR3218I
Electronic Self Test failed. Output port 4 in library library-name. - CBR3219I
Electronic Self Test failed. Output port 5 in library library-name. - CBR3220I
Electronic Self Test failed. RAM chip 1D in library library-name. - CBR3221I
Electronic Self Test failed. RAM chip 2D in library library-name. - CBR3222I
Electronic Self Test failed. RAM chip 1E in library library-name. - CBR3223I
Electronic Self Test failed. RAM chip 2E in library library-name. - CBR3224I
Electronic Self Test failed. Timer chip 1B in library library-name. - CBR3225I
Electronic Self Test failed. Timer chip 7L in library library-name. - CBR3226I
Electronic Self Test failed. Counter chip 8L in library library-name. - CBR3227I
Electronic Self Test failed. Timer chip 7L or bus interrupt module 5L in library library-name. - CBR3228I
Electronic Self Test failed. Timer chip 8L or bus interrupt module 5L in library library-name. - CBR3229I
Electronic Self Test timers out of synch in library library-name. - CBR3230I
Electronic Self Test failed. Bus interrupt module 5L in library library-name. - CBR3231I
Electronic Self Test failed. UART chip 2B in library library-name. - CBR3232I
Electronic Self Test failed. DUART chip 1E in library library-name. - CBR3233I
Electronic Self Test failed EPROM check in library library-name. - CBR3235I
Gripper full sensor intermittent in library library-name. - CBR3236I
Horizontal limit failure in library library-name. - CBR3237I
Vertical limit failure in library library-name. - CBR3238I
Pivot limit failure in library library-name. - CBR3239I
I/O slot full sensor failure in library library-name. - CBR3240I
Slot full sensor failure in library library-name. - CBR3241I
Gripper center of alignment not found in library library-name. - CBR3242I
EEPROM checksum error in library library-name. - CBR3243I
RAM update failure in library library-name. - CBR3244I
Drive drive-number was not spun down before retract in library library-name. - CBR3245I
Gripper 1 failed during retry of Store command in library library-name. - CBR3246I
Gripper 2 failed during retry of Store command in library library-name. - CBR3247I
Gripper 1 failed during retry of Output command in library library-name. - CBR3248I
Gripper 2 failed during retry of Output command in library library-name. - CBR3249I
Gripper 1 failed during retry of Insert command in library library-name. - CBR3250I
Gripper 2 failed during retry of Insert command in library library-name. - CBR3251I
Gripper 1 full sensor fault occurred selecting a cartridge in library library-name. - CBR3252I
Gripper 2 full sensor fault occurred selecting a cartridge in library library-name. - CBR3253I
Gripper 1 slot full sensor and aligned sensor could not find the end of target in library library-name. - CBR3254I
Gripper 1 aligned sensor could not find the end of target in library library-name. - CBR3255I
Gripper 1 slot full sensor could not find the end of target in library library-name. - CBR3256I
Cartridge jammed in library library-name between the gripper and drive drive-number. - CBR3300I
Possible I/O error on {library | drive | volume} library-name/drive-name/volser, return-code, fsc, sense-data. - CBR3301I
sub-order, volser-1, category, volser-2, paclen, pacdatl, pacid, paclibid, pacdrvid, paclibf, paclstat, pacdrvf, pacdstat, volser-3, volser-4, pacmedtyp. - CBR3302I
Unsupported return code return-code received from controller. - CBR3303I
Duplicate volume label detected on drive drive-name. - CBR3304I
Volume volser has failed consecutive requests. - CBR3305I
Audit review in progress in library library-name. - CBR3306I
The I/O station in library library-name is no longer usable. - CBR3307I
One or more devices failed during the remap of library library-name. - CBR3308I
The I/O station door in library library-name is open. - CBR3309E
dddd, {ACCESSOR | CONTROLLER | DRIVE | MEDIA | UNKNOWN} {SERVICE | MODERATE | SERIOUS | ACUTE | UNKNOWN} ALERT ON LIBRARY=lib-name, MT=device-type, SERIAL=mmpp-ssssss, DRIVE=drive-name, VOLSER=volser, ACTION={NONE | CLEAN | REPLACE | REPAIR}, REFCODE=tttt ffff - CBR3310I
Error with no additional sense in library library-name. - CBR3311I
Library library-name could not become ready. - CBR3312I
Element status in library library-name needs initialized. - CBR3313I
Manual intervention required on library library-name. - CBR3314I
The source element in library library-name was unexpectedly empty. - CBR3315I
Destination element in library library-name was unexpectedly full. - CBR3316I
ROM checksum error in library library-name. - CBR3317I
RAM checksum error in library library-name. - CBR3318I
Microprocessor test error in library library-name. - CBR3319I
Controller RAM checksum error in library library-name. - CBR3320I
Microcode error in library library-name. - CBR3321I
SCSI controller register error in library library-name. - CBR3322I
SCSI controller message error in library library-name. - CBR3323I
SCSI controller command and/or data error on {library | drive} library-name/drive-name. - CBR3324I
SCSI controller kill error in library library-name. - CBR3325I
SCSI controller FIFO error in library library-name. - CBR3326I
SCSI controller target sequence error in library library-name. - CBR3327I
SCSI controller command sequence error in library library-name. - CBR3328I
SCSI controller status sequence error in library library-name. - CBR3329I
Motor control chip compare failure in library library-name. - CBR3330I
Motor control chip loop back test failed in library library-name. - CBR3331I
12 volt power supply bad in library library-name. - CBR3332I
26 volt power supply bad in library library-name. - CBR3333I
Drive drive-name not connected. - CBR3334I
Command rejected, invalid version id detected in the command packet. - CBR3335I
Command rejected, invalid high speed look up value detected in the command packet. - CBR3336I
Command rejected, command packet contains an invalid entry in the field PACLEN. - CBR3337I
Unspecified mechanical error in library library-name. - CBR3338I
Unable to free picker fingers in library library-name. - CBR3339I
Vertical beams have failed in library library-name. - CBR3340I
Vertical path sensors blocked in library library-name. - CBR3341I
Unable to verify picker position in library library-name. - CBR3342I
Transfer motion failure in library library-name. - CBR3343I
Carriage motion failure in library library-name. - CBR3344I
Unable to free picker fingers in library library-name. - CBR3345I
Unable to determine which side of the picker is up in library library-name. - CBR3346I
Flip motion failure in library library-name. - CBR3347I
Motion error while checking for cartridge in picker in library library-name. - CBR3348I
Library library-name unable to measure the height of sensor on left side. - CBR3349I
Library library-name unable to measure the height of sensor on right side. - CBR3350I
Excessive upward tilt on picker in library library-name. - CBR3351I
Excessive downward tilt on picker in library library-name. - CBR3352I
Excessive cone angle on picker in library library-name - CBR3353I
Excessive stacker tilt in library library-name. - CBR3354I
Library library-name was unable to complete an interrupted move at power-up. - CBR3355I
Unable to find top of unit in library library-name. - CBR3356I
Lower left calibration sensor failed in library library-name. - CBR3357I
Lower right calibration sensor failed in library library-name. - CBR3358I
Upper left calibration sensor failed in library library-name. - CBR3359I
Upper right calibration sensor failed in library library-name. - CBR3360I
Left vertical path blocked in library library-name. - CBR3361I
Right vertical path blocked in library library-name. - CBR3362I
Left or right vertical beam in library library-name is failing intermittently. - CBR3363I
Right vertical beam too high in library library-name. - CBR3364I
Left vertical beam too high in library library-name. - CBR3365I
Left vertical LED failed in library library-name. - CBR3366I
Right vertical LED failed in library library-name. - CBR3367I
Left vertical sensor failed in library library-name. - CBR3368I
Right vertical sensor failed in library library-name. - CBR3369I
Vertical sensor system failed in library library-name. - CBR3370I
Input/output station in library library-name will not rotate inward. - CBR3371I
Front input/output station sensor in the input/output station failed in library library-name. - CBR3372I
Input/output station in library library-name will not accept or release a cartridge. - CBR3373I
A slot in library library-name will not accept or release a cartridge. - CBR3374I
Drive drive-name will not load. - CBR3375I
Drive drive-name has failed to set the busy status. - CBR3376I
Library library-name failed power on self test. - CBR3377I
Command rejected, access to a device or volume was denied. - CBR3378I
Command failed due to the data areas in the controller having been destroyed in library library-name. - CBR3379I
Volume mounted on drive drive-name is unformatted. - CBR3380I
Command rejected, data length in the command packet is invalid. - CBR3381I
Volume mounted on drive drive-name contains an unrecognized format. - CBR3382I
Solenoid failure in drive drive-name. - CBR3383I
Command rejected, general logic failure. - CBR3384I
Command rejected, drive drive-name in use. - CBR3385I
Command rejected, all drives in library library-name are currently in use. - CBR3386I
Unable to gain proper control of the motors in library library-name. - CBR3387I
Unable to move the picker motor in library library-name. - CBR3388I
Unable to move the carriage motor in library library-name. - CBR3389I
Unable to move either motor in library library-name. - CBR3390I
Unable to find hard stop while turning picker motor in library library-name. - CBR3391I
Unable to find hard stop while turning carriage motor in library library-name. - CBR3392I
Excessive force required to move the carriage motor in library library-name. - CBR3393I
Illegal test parameter was issued in library library-name. - CBR3394I
Invalid diagnostic test number sent to library library-name. - CBR3395I
Diagnostic failure in library library-name. - CBR3396I
Parameter list length error in library library-name controller code. - CBR3397I
Command operation code invalid for library library-name. - CBR3398I
Transport element address does not exist for library library-name. - CBR3399I
Source element address does not exist in library library-name. - CBR3400I
Destination element address in library library-name does not exist. - CBR3401I
Second destination element address specified for exchange command does not exist for library library-name. - CBR3402I
Illegal function specified for device type in library library-name. - CBR3403I
Command issued in library library-name contained invalid fields in the command descriptor block. - CBR3404I
A command was issued to library library-name that contained an unsupported logical unit number. - CBR3405I
A command was issued to library library-name which contained an invalid field in the parameter list. - CBR3406I
The carriage and picker assembly in library library-name has a cartridge in the picker. - CBR3407I
The destination storage element in library library-name already has a cartridge in it. - CBR3408I
The second destination element in library library-name already has a cartridge in it. - CBR3409I
Source storage element in library library-name is empty. - CBR3410I
First destination storage element in library library-name is empty. - CBR3411I
A command issued in library library-name contains invalid bits in the identify message. - CBR3412I
Could not clear the unit attention from a power on or a SCSI reset in library library-name. - CBR3413I
Command overlap in library library-name. - CBR3414I
Message parity error in library library-name. - CBR3415I
Initiator select/reselect failure in library library-name. - CBR3416I
SCSI parity error in library library-name. - CBR3417I
Initiator detected error message in library library-name. - CBR3418I
Error with no additional sense information for drive drive-name. - CBR3419I
No ESDI command complete from drive drive-name. - CBR3420I
Write fault occurred on drive drive-name. - CBR3421I
Drive drive-name responded to the same drive number as another drive. - CBR3422I
Logical unit communications failure between drive drive-name and the drive controller. - CBR3423I
Track following error on drive drive-name. - CBR3424I
Load/unload failure on drive drive-name. - CBR3425I
Spindle failure on drive drive-name. - CBR3429I
ID CRC error detected on drive drive-name. - CBR3430I
Seek position error detected on drive drive-name. - CBR3431I
Power-on diagnostic failure detected on drive drive-name. - CBR3432I
Message reject error from drive drive-name. - CBR3433I
Internal controller error detected in drive drive-name. - CBR3434I
SCSI interface parity error detected on drive drive-name. - CBR3435I
Initiator detected error for drive drive-name. - CBR3441I
Drive drive-name could not become ready. - CBR3442I
Drive drive-name is not selected. - CBR3443I
No optical disk present in drive drive-name. - CBR3444I
Unrecoverable read error on drive drive-name. - CBR3446I
Media in drive drive-name has corrupted format. - CBR3447I
No spare sectors available on media mounted on drive drive-name. - CBR3450I
Invalid command operation code sent to drive drive-name. - CBR3451I
Illegal block address specified in command to drive drive-name. - CBR3452I
Illegal function specified for media type mounted in drive drive-name. - CBR3453I
Illegal field in command descriptor block sent to drive drive-name. - CBR3454I
Invalid logical unit number sent to drive drive-name. - CBR3455I
Invalid field in parameter list for command sent to drive drive-name. - CBR3456I
A write protect indication for volume volser was received from drive drive-name. - CBR3457I
Could not clear unit attention from media change on drive drive-name. - CBR3458I
Could not clear unit attention from power on or device reset on drive drive-name. - CBR3459I
Could not clear unit attention from mode select parameter being changed on drive drive-name. - CBR3460I
Command rejected, invalid suborder detected in command packet. - CBR3461I
Command rejected, command packet contains an invalid or missing entry in field VOLSER1. - CBR3462I
Command rejected, command packet contains an invalid or missing entry in field VOLSER2. - CBR3463I
Command rejected, missing or invalid category detected in command packet. - CBR3464I
Command rejected, invalid packet id detected in the command packet. - CBR3465I
Command rejected, invalid library id detected in the command packet. - CBR3466I
Command rejected, invalid drive id detected in the command packet. - CBR3467I
Command rejected, invalid collection name detected in the command packet. - CBR3468I
Command rejected, invalid object name detected in the command packet. - CBR3469I
Command rejected, invalid file handle detected in the command packet. - CBR3470I
Command rejected, invalid object length detected in the command packet. - CBR3471I
Command rejected, invalid object offset detected in the command packet. - CBR3472I
Command reject, invalid object security classification detected in the command packet. - CBR3473I
Command rejected, command packet contains an invalid or missing entry in field VOLSER3. - CBR3474I
Command rejected, command packet contains an invalid or missing entry in field VOLSER4. - CBR3475I
Command rejected, invalid mode detected in the command packet. - CBR3476I
Command rejected, library library-name locked. - CBR3477I
Command rejected, command packet contains an invalid model number. - CBR3478I
The state of the media mounted in drive drive-name cannot be determined. - CBR3479I
Functional microcode in {library | drive} library-name|drive-name has failed. - CBR3480I
The input/output station in library library-name is empty. - CBR3481I
Volume volser is not in library library-name. - CBR3482I
Library library-name is full. - CBR3483I
Command rejected, remap in progress in library library-name. - CBR3484I
Duplicate object name found on volume volser in library library-name. - CBR3485I
SCSI controller chip RAM failed in library library-name. - CBR3486I
Motor control chip RAM failed in library library-name. - CBR3487I
The rear input/output station sensor in the input/output station in library library-name has failed. - CBR3488I
Illegal test issued in library library-name. A front panel or RS232 panel is required. - CBR3489I
Illegal test issued in library library-name. A SCSI interface is required. - CBR3490I
Unable to read from volume volser mounted on drive drive-name at this time. - CBR3491I
No track zero found on drive drive-name. - CBR3492I
Incompatible media mounted on drive drive-name. - CBR3493I
Drive drive-name encountered an unrecoverable error. - CBR3494I
Overwrite error occurred on volume volume-name mounted on drive drive-name - CBR3495I
A blank sector was read from the volume mounted on drive drive-name. - CBR3496I
A write operation occurred on a recorded sector on volume volser mounted on drive drive-name. - CBR3497I
Drive drive-name encountered a status error from a second party on a copy command. - CBR3498E
Door in library library-name is open. - CBR3499I
Read element status address does not exist in library library-name. - CBR3500I
OS/2 error, return code = return-code. - CBR3501I
Volume volser was mounted in library library-name, but was not the volume expected. - CBR3502I
Command rejected, a request for a volume or drive in library library-name is in use by another process. - CBR3503I
Volume volser in drive drive-name is full. - CBR3504I
The cartridge was returned to the drive. - CBR3505I
The cartridge remains in the picker. - CBR3506I
The cartridge remains in a slot. - CBR3507I
Unexpected error reported by drive drive-name. - CBR3508I
Error condition reported by library library-name. - CBR3509I
Command rejected, device driver timeout error. - CBR3510I
Command rejected, SCSI adapter card error. - CBR3511I
Command rejected, non-critical resource error. - CBR3512I
Command rejected, controller logic error. - CBR3513I
Illegal function specified for drive drive-name. - CBR3514I
Compare error detected during processing on drive drive-name. - CBR3515I
Command rejected, command packet contains an invalid entry in the field PACDATL. - CBR3516I
Command rejected, the number of open files has exceeded the allowed limits. - CBR3517I
Command rejected, command packet contains an invalid serial number. - CBR3518I
The vendor product data file failed to open in library library-name. - CBR3519I
Error reading label of volume mounted on drive drive-name. - CBR3520I
Command rejected, command packet contains an invalid open type. - CBR3521I
Command rejected, command packet contains an invalid PACLIBF. - CBR3522I
Command rejected, command packet contains an invalid PACDRVF. - CBR3523I
Command rejected, command packet contains an invalid PACCMDBF1. - CBR3525I
Decrease in reflection beam power detected on drive drive-name. - CBR3526I
A select/reselect failure occurred on drive drive-name. - CBR3527I
Command rejected, device driver/ABIOS/SCSI card microcode error. - CBR3528I
Command rejected, multiple unit attentions occurred. - CBR3529I
Command rejected, command packet contains an invalid PACCMDBF2. - CBR3530I
Non-volatile RAM checksum failure in library library-name. - CBR3531I
Command rejected, SCSI adapter card error. - CBR3532I
Command rejected, bus protocol error. - CBR3533I
Command rejected, command packet contains an invalid PACCMDBF3. - CBR3534I
Command rejected, command packet contains an invalid PACCMDBF4. - CBR3535I
Command rejected, command packet contains an invalid PACCMDHW1. - CBR3536I
Command rejected, command packet contains an invalid PACCMDHW2. - CBR3537I
Command rejected, command packet contains an invalid PACCMDHW3. - CBR3538I
Command rejected, command packet contains an invalid PACCMDHW4. - CBR3539I
Command rejected, command packet contains an invalid PACCMDW1. - CBR3540I
Command rejected, command packet contains an invalid PACCMDW2. - CBR3541I
Command rejected, command packet contains an invalid PACCMDW3. - CBR3542I
Command rejected, command packet contains an invalid PACCMDW4. - CBR3543I
Command rejected, command packet contains an invalid PACDATA1. - CBR3544I
Command rejected, command packet contains an invalid PACDATA2. - CBR3545I
Excessive cartridges detected in library library-name. - CBR3546I
Calibration sensor not found in library library-name. - CBR3547I
Internal track error on drive drive-name. - CBR3548I
Unrecoverable read error of SSA on drive drive-name. - CBR3549I
Invalid switch setting on drive drive-name. - CBR3550I
Statistical Information Activated switch is on in drive drive-name. - CBR3552I
Media removal error detected on drive drive-name. - CBR3553I
Inhibit media removal switch active on drive drive-name. - CBR3554I
Peripheral device write fault on drive drive-name. - CBR3555I
No index/sector signal on drive drive-name. - CBR3556I
Reassignment process failed three times on drive drive-name. - CBR3557I
Data sync mark error on drive drive-name. - CBR3558I
Invalid message error on drive drive-name. - CBR3560I
Drive drive-name not ready. - CBR3561I
An erase failure occurred on drive drive-name. - CBR3562I
A defect list error occurred on drive drive-name. - CBR3563I
A diagnostic failure occurred on drive drive-name. - CBR3564I
A medium load/unload failure occurred on drive drive-name. - CBR3565I
Saving parameters is not supported on drive drive-name. - CBR3566I
A spindle servo error occurred on drive drive-name. - CBR3567I
A spindle servo error occurred on drive drive-name. - CBR3568I
A data path parity error occurred on drive drive-name. - CBR3569I
Volume volser is mounted in backup mode. - CBR3570I
Volume volser has a corrupted volume directory. - CBR3571I
Logical unit not ready, spindle motor turned off on drive drive-name. - CBR3572I
Microcode has been changed on drive drive-name. - CBR3573I
Object collection-name object-name not found on volume volser. - CBR3574I
Collection name collection-name not found on volume volser while attempting to read object object-name. - CBR3575I
Parameter list length error for command on drive drive-name. - CBR3576I
Initiator sent a second command to drive drive-name while busy with previous command. - CBR3577I
Library library-name is currently busy in diagnostic mode. - CBR3578I
One of the fans in library library-name has failed. - CBR3579I
Library library-name configuration is corrupted. A remap is recommended. - CBR3580I
The volume mounted on drive drive-name has a problem. - CBR3581I
The volume mounted in the operator accessible drive drive-name was ejected. - CBR3582I
Temperature alarm in library library-name. - CBR3583I
Volume volser mounted on drive drive-name is write protected. - CBR3584I
Format of media mounted on drive drive-name failed. - CBR3585I
Insertion of media into the I/O station has caused the remap for library library-name to suspend. - CBR3590I
Invalid drive ID drive-id returned from library library-name in command packet response. - CBR3600I
Unable to eject volume volser from library library-name following volume entry failure. - CBR3601I
Entry of volume volser into library library-name1 rejected. Duplicate in library library-name2. - CBR3602I
Enter request rejected by the cartridge entry installation exit (CBRUXENT). - CBR3603I
Entry of volume volser into library library-name rejected. Duplicate {DASD | optical} volume exists. - CBR3604I
Unable to update scratch volume or empty slot count for library library-name. - CBR3605I
Entry of volume volser into library library-name rejected. Storage group storage-group-name invalid. - CBR3606I
Entry of volume volser into library library-name failed. Unable to set the volume category. - CBR3607I
Abend ABEND-code occurred in the cartridge entry installation exit (CBRUXENT). - CBR3608I
Invalid return code return-code from the cartridge entry installation exit (CBRUXENT). - CBR3609I
Invalid data data returned from the installation exit (CBRUXENT) in field field-name. - CBR3610I
Volume entry processing. The following volumes were entered into library library-name. volser1 volser2 volser3 volser4 volser5 volser6 volser7 volser8 - CBR3613I
Unable to obtain storage for the installation exit (CBRUXENT) parameter list. - CBR3614I
Unable to establish an ESTAE for the installation exit (CBRUXENT). ESTAE RC = return-code. - CBR3615E
Tape entry processing discontinued due to an installation exit (CBRUXENT) failure. - CBR3616I
Cartridge entry processing for library library-name failed. Unable to obtain the insert category inventory. - CBR3617I
Unable to obtain the number of {scratch volumes | empty slots} in library library-name. - CBR3618I
Tape entry processing in library library-name suspended. - CBR3619I
Entry of volume volser in library library-name failed. Unable to determine volser uniqueness. - CBR3620I
Entry of volume volser into library library-name failed. - CBR3621I
Enter request ignored by the cartridge entry installation exit (CBRUXENT). - CBR3622I
Entry of volume volser into library library-name rejected. Media type inconsistency between the LM and the TCDB. - CBR3623I
Invalid tape storage group storage-group-name returned from installation exit (CBRUXENT). - CBR3624I
Entry of volume volser into library library-name ignored. TDSI recording technology recording-technology not known. - CBR3625I
Entry of volume volser into library library-name failed. Unable to set the attributes for the volume. - CBR3626I
Entry of volume volser into library library-name failed. Unable to obtain the attributes for the volume. - CBR3627I
Outboard storage group policy storage-group assigned to volume volser in library library-name failed validation. - CBR3628I
Entry of volume volser into library library-name failed. Outboard policy exceeds the hardware limit. - CBR3629I
Cartridge entry installation exit (CBRUXENT) bypassed. - CBR3630I
Entry of volume volser into library library-name failed. Library detected duplicate. - CBR3640I
Abend ABEND-code occurred in the volume not in library installation exit (CBRUXVNL). - CBR3641I
Invalid return code return-code from the volume not in library installation exit (CBRUXVNL). - CBR3642I
Unable to obtain storage for the volume not in library installation exit (CBRUXVNL) parameter list. - CBR3643I
Unable to establish an ESTAE recovery environment for the volume not in library installation exit. ESTAE RC=return-code. - CBR3645E
Volume not in library installation exit (CBRUXVNL) disabled due to an installation exit failure. - CBR3646D
Entry of CBRUXVNL volume volser into library library-name still pending. Reply 'R' to retry or 'C' to cancel. - CBR3650I
Eject of volume volser from library library-name failed. - CBR3651I
Unable to obtain storage for the installation exit (CBRUXEJC) parameter list. - CBR3652I
Unable to establish an ESTAE for the installation exit (CBRUXEJC). ESTAE RC = return-code. - CBR3653I
Invalid data data returned from the installation exit (CBRUXEJC) in field field-name. - CBR3654I
Invalid return code return-code from the cartridge eject installation exit (CBRUXEJC). - CBR3655E
Tape eject processing discontinued due to an installation exit (CBRUXEJC) failure. - CBR3656I
Eject request rejected by the cartridge eject installation exit (CBRUXEJC). - CBR3657I
Abend ABEND-code occurred in the cartridge eject installation exit (CBRUXEJC). - CBR3658I
Unable to make the failed eject notification call for volume volser from library library-name. - CBR3659I
Failed eject notification processing for volume volser from library library-name failed. - CBR3660A
Enter MEDIAn scratch volumes into library library-name. - CBR3670I
Volume entry processing. Enter requests ignored for the following volumes in library library-name. volser1 volser2 volser3 volser4 volser5 volser6 volser7 volser8 - CBR3672I
Enter requests ignored for one or more volumes in library library-name. The first volume ignored was volser. - CBR3680I
Export completion processing for logical volume volser from library library-name failed. - CBR3681I
Export completion processing for logical volume volser from library library-name failed. Unable to set the volume to the volume purge category. - CBR3682I
Export completion processing for library library-name failed. Unable to obtain the exported category inventory. - CBR3683I
Export completion processing for library library-name suspended. - CBR3684I
Export processing completed for logical volume volser from library library-name; however, the TCDB volume record change could not be made. - CBR3685I
Export processing. Volumes exported from library library-nameon stacked volume volser.volser1 volser2 … volser8 - CBR3687I
Export completion processing for logical volume volser from library library-name ignored by the cartridge eject installation exit (CBRUXEJC). - CBR3688I
Unable to perform export completion processing for logical volume volser from library library-name1. Possible duplicate volume in library library-name2. - CBR3696I
All scheduled audit requests to library library-name purged. OAM termination in progress. - CBR3700I
Eject canceled for volume volser. Library library-name is unavailable. - CBR3701I
Audit canceled for volume volser. Library library-name is unavailable. - CBR3710I
LIBSERV failure occurred for library library-name. RC=return-code, RSN=reason-code, REQTYPE=request-type. - CBR3711I
Unexpected error code error-code and modifier modifier from library library-name. - CBR3712I
Unexpected completion code, CC=cc, from library library-name. - CBR3713I
Permanent I/O error in library library-name, for volume volser. Sense not available. - CBR3714I
{MOUNT | DEMOUNT | AUDIT | EJECT} completion status for volume volser, library library-name, message ID msgid lost. - CBR3715I
Request for library library-name failed. No paths available for I/O. - CBR3716I
Volume volser is in the exported category in library library-name. - CBR3717I
LIBSERV indicated that the total number of queued eject requests has reached its limit. - CBR3718I
{MOUNT | DEMOUNT | AUDIT | EJECT} completion status for volume volser, library library-name, message ID msgid, unable to obtain. - CBR3720I
Eject of volume volser from library library-name canceled. - CBR3721I
Library library-name in manual mode. - CBR3722I
Library library-name equipment check. - CBR3723I
Library library-name vision system not operational. - CBR3724I
Volume volser does not exist in library library-name. - CBR3725I
Library library-name command reject for volume volser. Library error code=error-code. - CBR3726I
Function incompatible error code error-code from library library-name for volume volser. - CBR3727I
Control Unit and Library Manager incompatible in library library-name, error code error-code. - CBR3728I
Volume volser in use in library library-name. {Already mounted | Mount pending | Eject in progress | Eject pending | Export in progress}. - CBR3729I
Library Manager for library library-name offline. - CBR3730E
One or more synchronous mode copy operations deferred in library library-name. - CBR3731I
All deferred synchronous mode copies completed in library library-name. - CBR3750I
Message from library library-name: message. - CBR3751I
Device device-number in library library-name is unavailable. - CBR3752I
Device device-number in library library-name is now available. - CBR3753E
All convenience output stations in library library-name are full. - CBR3754E
High capacity output station in library library-name is full. - CBR3755E
{Input | Output} door open in library library-name. - CBR3756I
Library library-name has returned to the automated operational state. - CBR3757E
Library library-name in {paused | manual mode} operational state. - CBR3758E
Library library-name operation degraded. - CBR3759E
Library library-name safety enclosure interlock open. - CBR3760E
Library library-name vision system not operational. - CBR3761E
Library library-name library manager offline. - CBR3762E
Library library-name intervention required. - CBR3763E
Library library-name library manager check 1 condition. - CBR3764E
Library library-name all storage cells full. - CBR3765E
No cleaner volumes available in library library-name. - CBR3766E
Dual write disabled in library library-name. - CBR3767E
Library library-name environmental alert. - CBR3768I
VTS operations in library library-name no longer degraded. - CBR3769I
Misplaced volume volser found in library library-name. - CBR3770I
Volume volser misplaced in library library-name. - CBR3771I
Duplicate volume volser ejected from library library-name. - CBR3772I
Duplicate volume volser left in input station in library library-name. - CBR3773I
Cartridge with an unreadable or invalid external label left in an I/O station in library library-name. - CBR3774I
Unexpected volume volser ejected from library library-name. - CBR3776I
Volume volser inaccessible in library library-name. - CBR3777I
Volume volser now accessible in library library-name. - CBR3778I
Cleaner volume ejected from library library-name. - CBR3779I
Damaged volume volser ejected from library library-name. - CBR3780I
Audit for volume volser in library library-name cancelled. - CBR3781I
No MEDIAn scratch volumes available in library library-name. - CBR3782I
Volume volser in library library-name external label missing or unreadable. - CBR3783E
Library manager switchover in library library-name in progress. - CBR3784I
Library manager switchover in library library-name is now complete. - CBR3785E
Copy operations disabled in library library-name. - CBR3786E
VTS operations degraded in library library-name. - CBR3787E
One or more immediate mode copy operations deferred in library library-name. - CBR3788E
Service preparation occurring in library library-name. - CBR3789E
VTS library library-name is out of empty stacked volumes. - CBR3790E
VTS library library-name has insufficient resources to continue mount processing. - CBR3791I
All deferred immediate mode copies completed in library library-name. - CBR3792E
Library library-name has entered the limited cache free space warning state. - CBR3793I
Library library-name has left the limited cache free space warning state. - CBR3794A
Library library-name has entered the out of cache free space critical state. - CBR3795I
Library library-name has left the out of cache free space critical state. - CBR3796E
Grid links degraded in library library-name. - CBR3797I
Grid links in library library-name are no longer degraded. - CBR3798E
Forced pause had occurred in library library-name. - CBR3799E
Copy operations in library library-name disabled by operator command. - CBR3801I
Volume volser audited in library library-name. - CBR3805I
Audit failed for volume volser in library library-name. - CBR3806I
Update of the volume error status in the TCDB for volume volser failed. Return=return-code. - CBR3850I
Library order sequence check in library library-name. An export or import operation already in progress. - CBR3851I
The import operation for import list volume volser failed. The number of logical volumes defined for library library-name is at the maximum. - CBR3852I
Library order sequence check in library library-name. A previous export or import operation did not complete host processing. - CBR3853I
The import operation for import list volume volser failed. There are no stacked volumes in the import category for library library-name. - CBR3854I
The operation for list volume volser failed. Scratch volumes are needed in library library-name for stacking. - CBR3855I
Export operation for logical list volume volser in library library-name completed successfully. Requested: requested-number Exportable: exportable-number Exported: exported-number Stacked volumes: stacked-number MBytes Exported: MBytes-exported MBytes Moved: MBytes-moved - CBR3856I
Export operation for logical list volume volser in library library-name completed with exceptions or errors. Requested: requested-number Exportable: exportable-number Exported: exported-number Stacked volumes: stacked-number MBytes Exported: MBytes-exported MBytes Moved: MBytes-moved - CBR3857I
Export operation for logical list volume volser in library library-name completed with exceptions or errors. Statistics for the operation were not available. - CBR3858I
Error incurred with list volume volser in library library. Library returned failure: failure-reason. - CBR3860I
Import operation for logical list volume volser in library library-name completed successfully. Requested: requested-number Importable: importable-number Imported: imported-number Stacked volumes: stacked-number MBytes Imported: Mbytes-imported MBytes Moved: Mbytes-moved - CBR3861I
Import operation for logical list volume volser in library library-name completed with exceptions or errors. Requested: requested-number Importable: importable-number Imported: imported-number Stacked volumes: stacked-number MBytes Imported: MBytes-imported MBytes Moved: MBytes-moved - CBR3862I
Import operation for logical list volume volser in library library-name completed with exceptions or errors. Statistics for the operation were not available. - CBR3863I
{Export | Import} operation cancelled for logical list volume volser in library library-name. - CBR3865I
Library initiated single volume import for volume volser in library library-name completed successfully. - CBR3866I
Library initiated single volume import for volume volser in library library-name failed. Library returned failure: failure-reason. - CBR3899I
Protocol error of psc received from device controller trying to access library library-name. - CBR3900A
Close the input/output station door on library library-name. - CBR3901I
Storage unavailable for MDR record for library library-name. MDR record lost. - CBR3902I
Storage unavailable for OBR record for library library-name. Library initialization terminated. - CBR3903I
Storage unavailable for DB2 OKD Parameter list for library library-name. Library initialization terminated. - CBR3904I
Storage unavailable for library LQRY status area for library library-name. Library initialization terminated. - CBR3905I
Storage unavailable for library command packet for library library-name. The command was not executed. - CBR3910I
There is no online and operational optical disk library. - CBR3911I
There is no online and operational tape library. - CBR3912I
There is no online and operational optical disk library on this OAM member member-name. - CBR3951I
Remap request cancelled. Library library-name is not available. - CBR3952I
Remap request cancelled for library library-name. The OAM address space is terminating. - CBR3953I
Invalid media type detected for volume volser by remap for library library-name. - CBR3956I
Remap of library library-name updating volume volser location. - CBR3957I
Remap of library library-name updating volume volser library name and location. - CBR3958I
Volume volser not found in volume table by remap of library library-name. Eject scheduled. - CBR3959I
Library library-name volume volser opposite side mismatch. Eject scheduled. - CBR3960I
Volumes volser-1 and volser-2 not found in volume table by remap of library-name. Eject scheduled. - CBR3961I
Volume volser not found in controller map by remap of library library-name. - CBR3962I
Remap for library library-name started. - CBR3963I
Remap for library library-name completed. - CBR3964I
Remap of library library-name failed. Unable to eject cartridge. - CBR3966I
Remap of library library-name-1 found wrong library library-name-2 for volume volser. Eject scheduled. - CBR3967I
Unable to retrieve empty slot count from controller during remap of library library-name. - CBR3968I
Remap for library library-name failed. The controller could not successfully complete remap. - CBR3969I
Remap for library library-name failed. Unable to retrieve map from controller. - CBR3970I
Remap of library library-name detected an error identifying a volume. Eject scheduled. - CBR3971I
Remap request cancelled for library library-name. Unable to establish recovery environment. - CBR3973I
Remap of library library-name update of volume table for volser failed. Return=return-code, Reason=reason-code. - CBR3974I
Remap for library library-name has terminated due to a failure in obtaining storage. - CBR4000I
LACS function-name error-type for drive device-number. - CBR4001I
Library library-name vision system not operational. - CBR4002I
Volume volser external label missing or unreadable. - CBR4003I
Volume volser error status not recorded. - CBR4004I
Volume volser not returned to scratch status. - CBR4005I
Scratch mount volser mismatch: int internal-volser, ext external-volser. - CBR4006I
Manual mode mount volser mismatch: int internal-volser, ext external-volser. - CBR4007I
Scratch mount invalid. Volume volser not defined in TCDB. - CBR4008I
Scratch mount invalid. Volume volser not in library library-name. - CBR4009I
Scratch mount invalid. Volume volser not a scratch volume. - CBR4010I
MTL mount volser mismatch: int internal-volser, req requested-volser. - CBR4011I
Permanent load failure: volume volser in library library-name. - CBR4012I
Damaged scratch volume volser detected in library library-name. - CBR4033I
UCB address missing or invalid. - CBR4034I
Volume serial number missing. - CBR4035I
LACS token address missing. - CBR4036I
Message buffer token address missing. - CBR4037I
WTO parameter list address missing. - CBR4038I
Both UCB address and UCB/token list address missing. - CBR4039I
More than one synchronization option specified. - CBR4040I
Multiple category assignments requested. - CBR4041I
Both UCB address and UCB/token list address specified. - CBR4042I
Invalid return or reason code specified. - CBR4043I
Invalid LACS function code specified. - CBR4044I
WTO parameter list not in WPX format. - CBR4045I
LACS token value zero. - CBR4046I
Wait incompatible with mount synchronization option. - CBR4047I
LACS return and reason codes show successful completion. - CBR4048I
Tape Device Selection Information address missing. - CBR4049I
Media type is invalid. - CBR4050I
Internal volume serial number internal-volser is invalid. - CBR4066I
Token mount request not found. - CBR4067I
Token mount request not complete. - CBR4097I
Library library-name offline. - CBR4098I
Library library-name not operational. - CBR4099I
Library library-name permanent I/O error. Sense not available. - CBR4100I
Library library-name equipment check. - CBR4101I
Library library-name Control Unit, Library Manager incompatible. - CBR4102I
Unexpected or inappropriate response from library library-name. - CBR4103I
Volume volser already in use in library library-name. - CBR4104I
Volume volser not in library library-name. - CBR4105I
No {eligible | MEDIAn} scratch volumes available in library library-name. - CBR4106I
Invalid sequence of orders sent to library library-name. - CBR4107I
Volume volser not in assigned location in library library-name. - CBR4108I
Unable to determine external volser of mounted volume. - CBR4109I
Library library-name mounted wrong volume: req requested-volser, mnt mounted-volser. - CBR4110I
Specific mount volser mismatch: int internal-volser, ext external-volser. - CBR4111I
AVR verify volser mismatch: int internal-volser, ext external-volser. - CBR4112I
Library library-name Library Attachment Facility not installed. - CBR4113I
No libraries defined to AOM. - CBR4114I
Library configuration not set to AOM. - CBR4116I
Library library-name library manager offline. - CBR4117I
Volume volser inaccessible in library library-name. - CBR4118I
Library library-name drive no longer available. - CBR4119I
Library name for MTL tape drive cannot be determined. - CBR4120I
Request for volume volser in library library-name lost. - CBR4121I
Request for status volume volser in library library-name failed. - CBR4122I
Damaged volume volser found in library library-name. - CBR4123I
Volume volser in library library-name incompatible with drive. - CBR4124I
Library library-name drive left in stand-alone mode. - CBR4125I
Valid copy of volume volser in library library-name inaccessible. - CBR4126I
Library library-name drive is in read only mode. - CBR4127I
Library library-name not enough physical drives available. - CBR4128I
Library library-name out of empty stacked volumes. - CBR4129I
ESTAE failure. Return code return-code. - CBR4130I
Message construction failure. Return code return-code. - CBR4131I
WTO failure. Return code return-code. - CBR4132I
LIBSERV failure. Return code return-code, reason code reason-code. - CBR4133I
AOMQUE failure. Return code return-code, reason code reason-code. - CBR4134I
IEEMIFSV failure. Return code return-code, reason code reason-code. - CBR4135I
CBRXVOL failure. Return code return-code. - CBR4136I
CBRXLIB failure. Return code return-code. - CBR4161I
System completion code ABEND-code, reason code ABEND-reason-code. - CBR4170I
Clone volume volser not in library library-name. - CBR4171I
Mount failed. LVOL=logical-volser, LIB=library-name, PVOL=physical-volser, RSN=reason-code. - CBR4172I
Mount for volume volser in library library-name cancelled. - CBR4173I
IO VTS in library library-name is unavailable. - CBR4174I
Cannot obtain ownership volume volser in library library-name. - CBR4175I
Volume volser library library-name access group denies mount. - CBR4176I
Volume volser library library-name access group invalid. - CBR4177I
Inconsistent WORM metadata volume volser library library-name. - CBR4178I
Library library-name not WORM enabled. - CBR4190I
LACS {MOUNT | DEMOUNT} unexpected error from library library-name, volume volser, job job-name, drive device-number, error code error-code, modifier modifier. - CBR4195I
LACS retry possible for job job-name: - CBR4196D
Job job-name, drive device-number, volser volser, error code error-code. {Reply 'R' to retry or 'C' to cancel. | Reply 'R' to retry, ‘W’ to wait or 'C' to cancel.} - CBR4225E
Change use attribute processing discontinued due to a CBRUXCUA failure when processing volume volser for library library-name. - CBR4226I
Invalid data data returned from the change use attribute installation exit (CBRUXCUA) in field field-name. - CBR4227I
Invalid return code return-code from the change use attribute installation exit (CBRUXCUA). - CBR4228I
Abend ABEND-code occurred in the change use attribute installation exit (CBRUXCUA). - CBR4400A
Mount volume volser on drive drive-name. Shelf location is shelfloc. - CBR4401I
Volume volser mounted on drive drive-name. - CBR4402I
Demount volume volser on drive drive-name, shelf location is shelfloc. - CBR4403I
Unlabeled volume on drive drive-name. Volume rejected. - CBR4404I
Volume volser on drive drive-name is rejected. - CBR4405D
Enter VOLSER for volume on drive drive-name. - CBR4406D
Enter owner information for volume volser on drive drive-name. - CBR4407I
Volume serial number volser already exists. Duplicate {optical | tape | DASD} volume. - CBR4408I
Write protection set on drive drive-name. - CBR4409A
Change the write protect switch on drive drive-name. Reply 'U' when done. - CBR4410I
Incorrect volume volser-1 found. Expected volume volser-2. - CBR4411I
Volume on drive drive-name is rejected. Reason code is reason-code. - CBR4412D
Enter VOLSER for volume on drive drive-name in library library-name. - CBR4413I
Write protection set on volume volser located on drive drive-name. - CBR4414D
Reply 'U' to use volume volser after removing write protection, or 'C' to cancel. - CBR4415I
Volume label written to volume on drive drive-name. Volume serial number is volser. - CBR4416I
Entered volume serial number volser is invalid. - CBR4417I
The volume label located on drive drive-name is invalid. - CBR4418I
Invalid label operation on drive drive-name volume serial number volser. - CBR4419I
Previously labeled volume volser was mounted on drive drive-name. - CBR4420I
Volume table did not contain information for volume volser on drive drive-name. - CBR4421D
Ready pending for drive drive-name. Reply 'R' to retry or 'C' to cancel. - CBR4422D
The disk mounted on drive drive-name was not flipped. Reply 'R' to retry or 'C' to cancel request. - CBR4423D
Enter shelf information for volume volser on drive drive-name. - CBR4424D
Volser entered for unlabeled volume in drive drive-name is volser. Reply 'U' to use this volser or, 'R' to retry. - CBR4425D
Removal of cartridge on drive drive-name is pending. Reply 'R' to retry or 'C' to cancel this request. - CBR4426D
Mount pending for volume volser on drive drive-name. Reply 'R' to retry or 'C' to cancel this request. - CBR4427I
Volume volser which was entered into library library-name-1 with a DB2 library name of library-name-2 was ejected. - CBR4428I
Volume volser which was entered into library library-name may have an incorrect volume table entry and was ejected. - CBR4429I
Volume volser ejected from library library-name. A mount is currently pending on drive drive-name for volume volser. - CBR4430A
Remove and flip cartridge on drive drive-name. - CBR4431E
Volume volser on drive drive-name not completely loaded. - CBR4432D
Enter storage group name for volumes volser-1 and volser-2, or reply 'U' to assign to scratch. - CBR4433I
storage-group-name is an invalid storage group name. - CBR4434I
Cartridge entry into library library-name failed. {Demount error | Mount error | Flip error | Format error | Unformatted write-protected volume | Volume in different library | Opposite side volser mismatch | One volume not in table | STORAGE OBTAIN failure | DB2 failure | I/O station failure | WORM scratch volume full}. - CBR4435I
Volumes volser-1 and volser-2 entered into library library-name. OAM configuration shows volser-3 is opposite side volume for volser-4. - CBR4436I
Volumes volser-1 and volser-2 entered into library library-name. volser-3 is part of OAM configuration. volser-4 is not. - CBR4437I
Label processing on drive drive-name failed. {Demount error | Mount error | Eject error | Flip error | Format error | Volume already known | Operator cancel | STORAGE OBTAIN failure | DB2 insert failure | WORM scratch volume full}. - CBR4438D
Volume in drive drive-name has unrecognized media format. Reply 'F' to format or 'C' to cancel. - CBR4439D
Enter volser for opposite side of volume volser in drive drive-name. - CBR4440I
Write-protected volume volser entered into library library-name. - CBR4441I
Delete of all rows from the Deleted Objects Table for volumes volser-1 and volser-2 failed. - CBR4442I
Volumes volser-1 and volser-2 are being reinitialized on drive drive-name. - CBR4443I
Label processing on drive drive-name failed. DB2 insert failure. - CBR4444I
Volume volser rejected from drive drive-name. A mount is currently pending on drive drive-name for volume volser. - CBR4445I
Cartridge entry of volumes volser1 and volser2 into library lib-name rejected, unacceptable media type. - CBR4446I
Cartridge entry of unlabeled/unformatted optical disk into library lib-name rejected, unacceptable media type. - CBR4447I
Cartridge entered into library lib-name is a media-type-description {WORM | rewritable} optical media cartridge. - CBR4448I
Only an optical disk cartridge that is compatible with DEFAULT MEDIA TYPE library-default-media-type can be entered into library lib-name. - CBR4449I
The media type for volumes volser1 and volser2 entered into library lib-name does not match the media type recorded in the volume table. - CBR4450I
Volume volser entered into library lib-name is a read only volume. - CBR4451I
Cartridge {Entry | Label} in progress for WORM volumes volser-1 and volser-2, targeted for scratch. Volser-1 freespace kilobyteskb, or xx%. Volser-2 freespace kilobyteskb, or xx%. - CBR4452D
Reply "U" to continue with Cartridge {Entry | Label} for volumes volser-1 and volser-2, anything else to cancel the operation. - CBR4453I
Unknown pseudo-library name plibrary-name specified for volume volser. The current library name for this volume is olibrary-name. - CBR4460I
Volume old_volser on drive drive_name has been relabeled to new_volser. - CBR4461I
{RELABEL | REFORMAT} volume old_volser failed. {Mount error | DB2 error | Internal service error | Label I/O error | Volume write protected | Check previous messages | VOLSER not unique | DB2 Object Directory table error}. - CBR4462I
Volume old_volser has been reformatted to new_volser. - CBR4464I
Volume volser-1 is being reformatted on drive drive-name. - CBR4465I
Volumes volser-1 and volser-2 are being reformatted on drive drive-name. - CBR5504A
Depress the start switch on drive-name. Reply 'U' when done or 'C' to cancel this drive initialization. - CBR5508I
Drive drive-name in library library-name is write protected. Usage is read only. - CBR5509I
Drive drive-name is write protected. Usage is read only. - CBR5512E
Drive drive-name no longer usable. - CBR5513E
Drive drive-name permanently taken out of service. - CBR5800I
I/O error on optical drive drive-name, vvvv, ww, xx, yy, zzzzzzzzzz. - CBR5801I
SCSI status byte ww {check condition | busy | reservation conflict} on drive drive-name. - CBR5802A
Start drive drive-name. Reply 'U' when complete or 'C' to cancel. - CBR5808I
Adapter command tag already in use on drive drive-name. - CBR5809I
Failing SCSI command: scsi-bytes. - CBR5810I
Invalid command from controller to SCSI adapter addressing drive drive-name. - CBR5811I
SCSI CDB byte count error addressing drive drive-name. - CBR5812I
Invalid SCSI ID error addressing drive drive-name. - CBR5813I
SCSI adapter timeout waiting for command completion from drive drive-name. - CBR5814I
Parity error on SCSI bus to or from drive drive-name. - CBR5815I
Invalid data pointer between device controller and SCSI adapter addressing drive drive-name. - CBR5817I
SCSI bus reset occurred addressing drive drive-name. - CBR5818I
SCSI adapter unknown or internal error addressing drive drive-name. - CBR5819I
SCSI adapter error. Data boundary crossing using drive drive-name. - CBR5820I
SCSI adapter unsuccessful in selecting drive drive-name. - CBR5821I
Parity error on data transfer to/from the adapter buffer using drive drive-name. - CBR5822I
Invalid SCSI bus ID. The drive drive-name does not exist. - CBR5823I
SCSI adapter function already in progress when trying to use drive drive-name. - CBR5824I
Unexpected disconnect from SCSI bus using drive drive-name. - CBR5825I
SCSI adapter detected differential sense fault using drive drive-name. - CBR5826I
Adapter detected faulty SCSI terminator power on drive drive-name. - CBR5827I
Error aabbcc occurred requesting sense from drive drive-name. - CBR5850I
Laser read power fault on drive drive-name. - CBR5851I
Laser write power fault on drive drive-name. - CBR5852I
Quad sum high fault on drive drive-name. - CBR5853I
Verify header fault on volume volser. - CBR5854I
Motor speed fault on drive drive-name. - CBR5855I
Microprocessor time out fault on drive drive-name. - CBR5856I
Microprocessor self-test fault on drive drive-name. - CBR5857I
Wobble test fault on drive drive-name. - CBR5858I
Phase-locked loop fault on drive drive-name. - CBR5859I
Focus fault on drive drive-name. - CBR5860I
Seek fault on drive drive-name. - CBR5861I
Tracking fault on drive drive-name. - CBR5862I
Line synchronization fault on drive drive-name. - CBR5863I
Data synchronization fault on drive drive-name. - CBR5864I
Quad sum low fault on drive drive-name. - CBR5865I
Seek error on volume volser in drive drive-name. - CBR5866I
Illegal operation code to drive drive-name. - CBR5867I
Invalid logical unit number addressing drive drive-name. - CBR5868I
Illegal seek address to drive drive-name. - CBR5869I
Illegal command description block parameter to drive drive-name. - CBR5870I
End of media reached on volume volser. - CBR5871I
Illegal transfer length on volume volser. - CBR5872I
Logical block overwrite (ARA) on volume volser. - CBR5873I
Spares Area or Orphan Table full (ARA) on volume volser. - CBR5874I
Reservation Table full on drive drive-name. - CBR5875I
SCSI I/O parity error using drive drive-name. - CBR5876I
Unable to read data on volume volser. - CBR5877I
Logical Block Address not found on volume volser. - CBR5878I
Unable to write data on volume volser. - CBR5879I
Internal parity error on drive drive-name. - CBR5880I
ECC fault on drive drive-name. - CBR5881I
Voltage fault on drive drive-name. - CBR5882I
Laser degraded on drive drive-name. - CBR5883I
Skip count overflow on drive drive-name. - CBR5884I
ARA initialization failed: mode unavailable for volume volser. - CBR5885I
ARA cartridge initialization failure: orphan phase on volume volser. - CBR5886I
ARA cartridge initialization failure: spares phase on volume volser. - CBR5887I
Power-up diagnostics aborted on drive drive-name. - CBR5888I
Diagnostics fault detected on drive drive-name. - CBR5889I
Diagnostic data not available for drive drive-name. - CBR5890I
Illegal sequence (drive not ready) for drive drive-name. - CBR5891I
Write protected drive error on drive drive-name. - CBR5892I
Unable to write with special postfield failure on drive drive-name. - CBR5893I
Media error or data field overwrite on drive drive-name. - CBR5894I
Empty sector detected on drive drive-name. - CBR5895I
Drive error on drive drive-name. - CBR5896I
Unsolicited interrupt on drive drive-name. - CBR5897I
Timeout occurred during spin up/down on drive drive-name. - CBR5899I
Protocol error of psc received from device controller trying to access drive drive-name. - CBR6000I
Error attaching {drive task for drive | file system task for} drive-or-task-name. - CBR6001I
Unexpected {drive | file system} task termination for {drive | task} drive-or-task-name. - CBR6002I
The tape drive task for ddname tape-ddname is being stopped and restarted. - CBR6003I
Unexpected file system task termination for task task-name, completion code = abend-completion-code, reason code = abend-reason-code. - CBR6100I
Cross-memory copy error between OAM address space and ASID asid. - CBR6200I
Error writing optical VTOC block for object object-name, address lba, volume volser, drive drive-name. - CBR6201I
Error writing data block for object object-name: address lba, volume volser, drive drive-name. - CBR6202I
Error writing object collection-name object-name on volume volser on drive drive-name. - CBR6205I
Defragmentation starting for volume volser on drive drive-name, the current fragmentation index is index. - CBR6206I
Defragmentation has completed for volume volser on drive drive-name. The ending fragmentation index is index. - CBR6207I
Defragmentation has failed for volume volser on drive drive-name. - CBR6220I
A media error occurred reading the volume serial number while auditing volume volser. - CBR6221I
Volume volser-1 in library library-name audited. Wrong volume volser-2 found in slot. - CBR6222I
Volume volser in library library-name was audited. The slot was empty. - CBR6223I
Volume volser audited. Volume not found in library library-name controller inventory. - CBR6224I
Audit failed. A slot access error occurred for volume volser in library library-name. - CBR6225I
Update of the volume error status field for volume volser failed. Return=return-code Reason=reason-code - CBR6226I
Audit failed for volume volser. Unexpected error: RC = rc RS = rs. - CBR6227I
Audit request failed. Unable to establish recovery environment. - CBR6300I
Error reading optical VTOC block: address lba, volume volser, drive drive-name. - CBR6301I
Error reading data block: address lba, volume volser, drive drive-name. - CBR6302I
Error reading object collection-name object-name on volume volser on drive drive-name. - CBR6310I
Invalid optical VTOC format at block address lba on volume volser. - CBR6400D
Unable to allocate tape drive for volser in SG storage-group-name. Reply 'C' to cancel, 'R' to retry, 'N' to nowait retry. - CBR6401I
The following number-of-messages messages were returned from MVS dynamic allocation. - CBR6402I
dynamic-allocation-returned-err-msg-text. - CBR6404I
Tape drive dynamic allocation failed for ddname=ddname, volser=volser. {OAM | SVC99} return code=return-code, reason code=reason-code. - CBR6405D
Tape volume volser on drive drv mount outstanding, reply 'C' to cancel or 'R' to retry. - CBR6407I
An abend occurred while attempting to {OPEN | CLOSE} a tape data set for ddname=ddname. System completion code=syscompcode, return code=return-code. - CBR6408I
OPEN of a tape data set failed for ddname=ddname on tape volume volser, return code=return-code, reason code=reason-code. - CBR6410I
Tape drive dynamic deallocation failed for ddname=ddname. {OAM | SVC99} return code=return-code, reason code=reason-code. - CBR6412I
CLOSE of a tape data set for ddname=ddname on volume volser failed. Return code=return-code, reason code=reason-code. - CBR6413I
An I/O error occurred during a {read | write} operation to volume=volser. Status of the I/O operation follows: Sense byte one=iobsens0, sense byte two=iobsens1, channel status word=iobcsw, ECB=decsdecb, contents of register one on entry to SYNAD routine=reg1. - CBR6414I
OAM write request failed for ddname=ddname on tape volume volser for collection collect-name and object object-name. {OAM | NOTE | SYNCDEV} return code=return-code, reason code=reason-code. - CBR6415I
An error occurred for DDNAME = ddname on tape volume volser for collection collname and object objname. Invalid blockid returned from device. Starting blockid = ssssss, ending blockid = eeeeee. - CBR6416I
OAM read request failed for ddname=ddname on tape volume volser for collection collect-name and object object-name. {OAM | POINT | NOTE | UNKNOWN} return code=return-code, reason code=reason-code. - CBR6417I
End of Data has been reached while {reading | writing} Object name objname, in collection collname, on volume volser. - CBR6418I
A RDJFCB failure occurred for ddname=ddname, return code=return-code. - CBR6419I
OAM failed to determine the media type for tape volume volser, standard capacity is assumed. Return code=return-code, reason code=reason-code. - CBR6420I
OAM failed to establish address space ASID=asid as a secondary address space. - CBR6421I
OAM experienced an error moving data from address space ASID=asid to the OAM address space. - CBR6422I
OAM experienced an error moving data from an OAM address space buffer to address space ASID=asid. - CBR6423I
OAM rejected scratch tape volume volser for ddname=ddname. There already exists a {DASD | OPTICAL | TAPE} volume with the same volser. - CBR6424I
Tape device allocation failed for unit name unit-name. An unsupported device type, ucb-device-type, was allocated for data set dsn on volume volser. - CBR6425I
OAM tape drive dynamic allocation failure for object object-name in collection collection-name in storage group storage-group-name on tape volume volser. - CBR6426I
Insert of volume volser into TAPEVOL table failed due to DB2 error, volume is returned to scratch. - CBR6427I
OAM write request for collection collection-name and object object-name on tape volume volume encountered a read buffered log failure. Logically written values will be used instead of physically written values for this write request. Return code=rc, reason code=reason-code. - CBR6428I
OAM tape volume volser has been marked not readable. - CBR6429I
Error writing OAM tape [sublevel 1 or backup | sublevel 2] object object-name, collection collection-name in storage group storage-group-name to MVS scratch tape volume volser. The volume capacity volume-capacity [KB | MB] is less than the object size object-size KB. [DATACLASS | L2DATACLASS]=data-class-name, [TAPEUNITNAME | L2TAPEUNITNAME]=tape-unit-name. OAM return code=return-code, reason code=reason-code. - CBR6430I
OAM {tape sublevel 1 or backup | tape sublevel 2} write request failed for object object-name, collection collection-name in storage group storage-group-name. Object size=object-size KB, {DATACLASS | L2DATACLASS}=data-class-name, {TAPEUNITNAME | L2TAPEUNITNAME}=tape-unit-name, MVS scratch tape threshold=object-threshold-size {KB | MB}. OAM return code=return-code, reason code=reason-code. - CBR6502I
OAM file system {write | read} request failed for collection collect-name, object object-name, and object storage group storage-group-name. L2TYPE or L2DIR is not specified for this storage group in SETDISK statement in PARMLIB member. - CBR6503I
OAM file system {write | read | delete} request failed for file system task task-name, collection collect-name, object object-name, L2TYPE l2type-name, L2DIR l2dir-name and object storage group storagegroup- name. OAM return code = return-code, reason code = reason-code, additional return code = additional-return- code, additional reason code = additional-reason-code. - CBR6520I
OAM File System Delete Task has temporarily suspended processing all file deletes due to {CAF CONNECT | OPEN CURSOR | FETCH | FILE SYSTEM CONNECT} error. Return code = rc, reason code = reason. - CBR6521I
OAM File System Delete Task has temporarily suspended processing file deletes for storage group group due to a repeating error condition. Return code = rc, reason code = reason. - CBR6522I
OAM File System Delete Task has temporarily suspended processing file deletes for storage group group because the storage group is {unknown | not file system enabled}. - CBR7000I
ATTACH error in module module-name at label label-name, RC = return-code. - CBR7001I
DETACH error in module module-name at label label-name, RC = return-code. - CBR7002I
Error recording SMF record type record-type subtype record-subtype, return code = return-code. - CBR7004I
STORAGE OBTAIN error in module module-name at label label-name, RC = return-code, SUBPOOL = subpool, AMOUNT = amount. - CBR7005I
STORAGE RELEASE error in module module-name at label label-name, RC = return-code, ADDRESS = address, LENGTH = length, SUBPOOL = subpool. - CBR7006I
LOAD error in module module-name at label label-name, RC = return-code, ABEND CODE = register-1, ENTRY = entry-name. - CBR7010I
ESTAE error in module module-name at label label-name, RC = return-code. - CBR7011I
WTOR error in module module-name at label label-name, RC = return-code. - CBR7012I
Error reporting RMF transaction completion message for subsystem = sname transaction class = trxclass transaction name = trxname, SYSEVENT return code = return-code. - CBR7014I
TIME error in module module-name at label label-name, RC = return-code. - CBR7017I
WTO service error issuing message message-number. WTO return code = rc. - CBR7018I
IDENTIFY error in module module-name at label label-name, RC = return-code. - CBR7019I
Storage unavailable for recovery work area. - CBR7020I
LXRES error in module module-name at label label-name, RC = return-code. - CBR7021I
AXSET error in module module-name at label label-name, RC = return-code. - CBR7022I
ETCRE error in module module-name at label label-name, RC = return-code. - CBR7023I
ETCON error in module module-name at label label-name, RC = return-code. - CBR7024I
ETDES error in module module-name at label label-name, RC = return-code. - CBR7030I
CONVCON error in module module-name. Return code = return-code. - CBR7031I
CBRXVOL {CREATE | RETRIEVE | UPDATE | REPLACE | DELETE | OPENVOL | GETVOL | CLOSEVOL} error for volume volser. Return code = return-code. - CBR7032I
CBRXLIB {CREATE | RETRIEVE | UPDATE} error for library library-name. Return code = return-code. - CBR7050I
Invalid date duration type date-duration-type. - CBR7053I
Invalid timestamp detected in module modname, boundary-type boundary test failed. Value1 = timestamp, Value2 = timestamp. - CBR7058I
Non zero return code from CSVDYNEX: Exit = Dynex_ExitName, Request = Dynext_Request, RC = Dynex_Returncode, RSN = Dynex_ReasonCode. - CBR7099I
Message message-id not found in message CSECT. - CBR7100I
Abnormal termination ffsssuuu in task task-name tcb-address at location address. - CBR7101I
PSW at time of error upper psw lower psw. - CBR7102I
General purpose registers at time of error: - CBR7103I
0-3 r0 r1 r2 r3 - CBR7104I
4-7 r4 r5 r6 r7 - CBR7105I
8-11 r8 r9 r10 r11 - CBR7106I
12-15 r12 r13 r14 r15 - CBR7107I
Abnormal termination located at offset offset in module module-name. - CBR7111I
Internal error in module module-name data1 data2 data3 data4 data5 data6 data7 data8. - CBR7200I
Invalid library name library-name passed to module CBRSFSCB. - CBR7201I
Invalid slot name slot-name passed to module CBRSFSCB. - CBR7210I
Command buffer of excessive length passed to module CBRSMGCR. - CBR7250I
IARV64 GETSTOR error in module module at label label, RC = return-code, Reason Code = reason-code, Amount = amount. - CBR7251I
IARV64 DETACH error in module module at label label, RC = return-code, Reason Code = reason-code, Address = address. - CBR7252I
IARV64 DISCARDDATA error in module module at label label, RC = return-code, Reason Code = reason-code, Address = address, Length = length. - CBR7253I
TCBTOKEN error in module module at label label, RC = return-code. - CBR7300I
Error occurred in the TSO parsing routine IKJPARS, rc = return-code. - CBR7301I
Unable to access the control-block control block located at address addr. - CBR7302I
The pointer to the control-block control block is zero. - CBR7303I
Hex value hex-value supplied with the parameter parameter is invalid. - CBR7305I
The control-block control block located at address addr is invalid. - CBR7306I
Unable to print the control-block control block, return code = return-code. - CBR7307I
Individual control block parameters are mutually exclusive with the CBDUMP parameter. - CBR7308I
GETMAIN error for the control-block control block, RC = return-code, SUBPOOL = 0, AMOUNT = amount. - CBR7309I
FREEMAIN error for the control-block control block, RC = return-code, SUBPOOL = 0, AMOUNT = amount. - CBR7310I
The control-block control block is located at address addr. - CBR7320I
The SYSOAM component trace has been initialized successfully {with | without} the CTICBR00 parmlib member. - CBR7321I
SYSOAM component trace option option is not valid. - CBR7322I
Invalid function request for the SYSOAM component trace. - CBR7323I
Error encountered acquiring {TCA | CADS | ALET} during SYSOAM component trace initialization. - CBR7400I
Error attaching XCF sub task for task-name. - CBR7401I
Unexpected OAM XCF sub task termination for task-name. - CBR7402I
Error attempting to process an XCF outgoing message, return code = return-code, reason code = reason-code. - CBR7403I
Optical volumes volser-1 and volser-2 are no longer known to OAM XCF member member-name. - CBR7404I
Tape volume volser is no longer known to OAM XCF member member-name. - CBR7405I
Request to {write | read} collection collection-name object object-name on {optical | tape} volume volser timed out waiting for response from target OAM target-OAM. - CBR7510I
OAM unable to CONNECT; DB2 not available. - CBR7515I
OAM initialization suspended. Start DB2 required for object support. - CBR7516D
Reply 'CONT' to continue without object support, 'WAIT' to wait for DB2, or 'STOP' to stop OAM. - CBR7520I
Error updating row in library table for library library-name. - CBR7521I
Error updating row in slot table for slot library-name slot-name. - CBR7522I
Error updating row in drive table for drive drive-name. - CBR7523I
Error updating row in volume table for volume volume-name. - CBR7525A
OAM processing suspended. Make the Optical Configuration Data Base tables available for update and reply 'U'. - CBR7530E
OAM degraded. DB2 is not available. Start DB2. - CBR7535I
OAM back at full capacity; DB2 now available. - CBR7540I
DB2 SQL -204: DB2 object not defined in the DB2 subsystem. Verify OAM binds and grants have been properly and successfully executed. - CBR7541I
DB2 SQL -205, -206: Column missing from OAM table. For new releases refer to migration guide otherwise refer to any new PTFs applied, new column added to tables. - CBR7542I
DB2 SQL -501: Cursor identified by either a FETCH or CLOSE statement is not open. Review prior DB2 and OAM errors for more information. - CBR7543I
DB2 SQL -805: DBRM or Package not found. Verify OAM application grants and binds have been properly and successfully executed. - CBR7544I
DB2 SQL -818: Inconsistent time stamps on modules from DBRM. Verify OAM Grants and Binds have been properly and successfully executed. - CBR7545I
DB2 SQL -904: Unavailable resource, either table space is out of space or DB2 utility is currently running. - CBR7550I
OAM connection to DB2 via CAF failed. - CBR7575I
CAF has issued a return code of return-code and reason code of reason-code within function function. - CBR7580I
SQL translation error in routine DSNTIAR, RC = return-code. - CBR7585I
An SQL error occurred: message-text - CBR8001I
OAM1 subsystem initialization starting. - CBR8002I
OAM1 subsystem initialization completed. - CBR8003A
OAM1 unable to load module module-name. - CBR8004A
OAM1 unable to obtain virtual storage. - CBR8005I
Invalid syntax or data specified on the OAM1 entry in IEFSSNxx. - CBR8006I
OAM1 partially initialized because SMS was not active. subsystem_id subsystem and OSREQ functions disabled. - CBR8007I
No DB2 SSID or the DB2 SSID value of "NONE" has been specified. subsystem_id subsystem cannot successfully initialize. - CBR8008I
OAM1 unable to create subsystem_id subsystem, return code=rc, reason code=reason-code. - CBR8010I
The OAM1 subsystem is already active on this system. Initialization terminated. - CBR8101I
The OAM/CICS interface is now connected. - CBR8103I
The OAM/CICS interface is already connected. - CBR8104I
OSR's entry point not found by the load macro. - CBR8105I
OAM/CICS interface is not operational. - CBR8107I
Resource manager deleted for OSREQ macro invocations due to error. - CBR8500I
subsystem_id subsystem is initializing. - CBR8501I
subsystem_id subsystem initialization complete. - CBR8502I
subsystem_id subsystem was active when an operator START subsystem_id subsystem was issued, START command rejected. - CBR8503I
subsystem_id subsystem initialization task failed to establish a recovery environment, failing return code=return-code. - CBR8504I
subsystem_id subsystem failed to add entry name entry_name to the subsystem_id subsystem load module, failing return code=rc. - CBR8505I
subsystem_id subsystem failed to obtain storage for a critical control block, failing return code=return-code. - CBR8506I
subsystem_id subsystem dispatcher task failed to establish a recovery environment, failing return code=return-code. - CBR8507I
subsystem_id subsystem failed to attach subtask task_name, failing return code=return-code. - CBR8508I
subsystem_id subsystem failed to LOAD DB2_load_module. LOAD RC = return-code. - CBR8509I
subsystem_id subsystem termination task failed to establish a recovery environment, failing return code=return-code. - CBR8510I
subsystem_id subsystem was dispatched with an incorrect processing state, subsystem_id subsystem will end. - CBR8511I
subsystem_id subsystem has terminated. - CBR8512D
DB2 subsystem ID not supplied to OTIS. Specify DB2 SSID or reply 'C' or 'NONE' to cancel OTIS. - CBR8526I
subsystem_id subsystem dump processing failed. Return code =return-code, reason code=reason-code. - CBR8530I
subsystem_id subsystem Collection Table Update task failed to establish a recovery environment, failing return code=return-code. - CBR8534I
subsystem_id subsystem failed to open thread to DB2 subsystem subsystem_id using plan planname, return code=return-code, reason code=reason-code. - CBR8535I
subsystem_id subsystem failed to close thread to DB2 subsystem subsystem_id for plan planname, return code=return-code, reason code=reason-code. - CBR8540I
OAM1 failed to develop PC numbers during execution of service_type service, return code = return-code. - CBR8550I
subsystem_id subsystem operator command task failed to establish a recovery environment, failing return code=return-code. - CBR8551I
subsystem_id subsystem already stopping when a command to stop the subsystem_id subsystem was entered, the command is rejected. - CBR8553I
subsystem_id subsystem operator command task reinitialized - CBR8554I
subsystem_id subsystem command issued while subsystem_id subsystem still initializing, command rejected, retry command after subsystem_id initialization complete. - CBR8555I
command_name command not recognized by subsystem_id subsystem. - CBR8556I
Modify subsystem_id command does not contain a command parameter for subsystem_id subsystem. - CBR8557I
subsystem_id subsystem command syntax invalid. - CBR8558I
subsystem_id subsystem command task abnormally ended during execution of command_name command. - CBR8559I
All subsystem_id subsystem operator commands have been purged. - CBR8560I
subsystem_id subsystem operator command task disabled. - CBR8570I
subsystem_id subsystem DB2 connect task failed to establish a recovery environment, return code=return-code. - CBR8571I
subsystem_id1 subsystem successfully connected to subsystem_id2 subsystem. - CBR8572I
subsystem_id1 subsystem unable to connect to subsystem_id2 subsystem because subsystem_id2 subsystem is not active. - CBR8573I
subsystem_id1 subsystem has requested subsystem_id2 subsystem to disconnect, disconnect pending. - CBR8574I
subsystem_id1 subsystem disconnect from subsystem_id2 subsystem successful. - CBR8575I
subsystem_id1 subsystem failed to disconnect from subsystem_id2, return code=return-code, reason code =reason-code, subsystem_id1 subsystem will be stopped. - CBR8576I
subsystem_id1 subsystem connect to subsystem_id2 subsystem failed, return code=return-code, reason code=reason-code. - CBR9000I
OSMC initialization starting. - CBR9001I
OSMC initialization completed. - CBR9002I
OSMC initialization failed. - CBR9003I
Addressability not obtained for system-service-name. - CBR9004I
Storage group name storage_group_name is invalid. - CBR9005I
OSMC is terminating. - CBR9006I
Error establishing the control task for ctcname. - CBR9007I
Error detaching the Control Task for ctcname. - CBR9008I
SMS storage group constructs unavailable. The SMS interface return code is SMSI-return-code. The SMS interface reason code is SMSI-reason-code. - CBR9009I
OSMC completed its Storage Management Cycle. n tasks started. x tasks completed. - CBR9010I
OSMC has stopped. - CBR9011I
OAM requested OSMC to terminate. - CBR9012I
OSMC completed termination. - CBR9013I
Start {OAM Volume Recovery | Move Volume | Recycle} command not processed. {OAM Volume Recovery | Move Volume | Recycle} request currently {queued | processing} for volume volser-1 / volser-2. - CBR9014I
Error establishing the object service object-service-name for control task ctcname. - CBR9015I
Error detaching the object service object-service-name for control task control-task. - CBR9016I
Dormant Task not found. TCB address tcbptr invalid. - CBR9017I
Move Volume not started for volser. - CBR9018I
OSMC starting Storage Management Cycle. - CBR9019I
Library Space Management not started for library-name. - CBR9020I
OAM Volume Recovery not started for volser. - CBR9021I
Storage unavailable for CBRHMCB control block. Initialization terminated. - CBR9022I
Single object processing for collection collname, object objname is already active. - CBR9023I
OSMC already started Storage Management Cycle. - CBR9024I
Collection name unknown for Collection ID collection-id, storage group storage-group-name. RC = reason-code - CBR9025I
CBRHSLSM unable to start library space management for library library-name. - CBR9026I
CBRHSRCV unable to start OAM Volume Recovery for volume volser. - CBR9027I
Catalog error while locating collection name collection-name: Return code is return-code. - CBR9028I
DB2 error while locating collection name collection-name: Return code is return-code Reason code is reason-code. - CBR9029I
CBRHSMVL unable to start move volume for volume volser. - CBR9030I
Unable to compare catalog entry with DB2 entry. - CBR9031I
OSMC Storage Management Cycle Processing not started because OSMC has been requested to {Stop | Terminate} processing. - CBR9032I
Invalid option specified with MAXS= keyword. Parameters specified = parms. OSMC Initialization terminated. - CBR9033I
Collection audit utility will not process due to failures. - CBR9034I
Deadlock or time out occurred during collection audit utility. - CBR9035I
Retry of deadlock or time out exceeded 30 times. - CBR9036I
A DB2 operation requested by the collection audit utility failed. Return code is return-code Reason code is reason-code. - CBR9040I
Single storage group processing not started for storage-group-name. - CBR9041I
Display detail information not started for storage-group-name. - CBR9042I
Display summary information not started. - CBR9043I
DASD Space Manager not started for storage-group-name. - CBR9044I
CBRHATTC could not start {Single Object Recovery | Object Recall | Object Backup} for collection collection-name, object object-name. - CBR9045I
Single Object Processing not started for collection collection-name, object object-name. - CBR9046I
DB2 terminating, OSMC will terminate. - CBR9047I
Operator requested OSMC to stop {processing | processing with FORCE specified}. - CBR9048I
Storage Group storage-group-name has successfully completed processing. - CBR9049I
Storage Group storage-group-name has unsuccessfully completed processing. - CBR9050I
ctcname process module-name requested {a nonexistent | an unavailable} {read | write | volume expiration check | completion} service for collection collection-name, object object-name. - CBR9051I
ctcname process module-name requested multiple read services for collection collection-name, object object-name. - CBR9052I
ctcname process module-name requested a {read | write | volume expiration check | tape or optical write} service without a {read | write | volume expiration check | tape or optical write} for collection collection-name, object object-name. - CBR9053I
control-task-name process module-name tried to read an object from the device to which it planned to write that object. The object is in collection collection-name named object-name - CBR9054I
Display detail information not started for RECYCLE. - CBR9055I
ctcname process module-name did not request completion processing for collection collection-name object object-name. - CBR9056I
ctcname process module-name selected invalid update transaction code update-transaction-code for collection collection-name, object object-name. - CBR9057I
control-task-name synchronous OSMC service object-service-name requested routing for collection collection-name object object-name before it completed processing. - CBR9058I
ctcname process module-name made a routing error for an object in collection collection-name, object object-name. - CBR9059I
ctcname process module-name cannot suppress completion processing for collection collection-name object object-name. - CBR9060I
ctcname process module-name had a FREEMAIN error in module CBRHROUT for collection collection-name object object-name's read buffer. - CBR9061I
OSMC stopping. Start storage group command for storage-group-name not processed. - CBR9062I
Module CBRHROUT is stopping OSMC control task control-task-name process module-name because of an excessive number of service request errors. - CBR9063I
Storage group storage-group-name already active. - CBR9064I
Storage management cycle in process. Storage group storage-group-name will be processed next. - CBR9066I
OSMC already stopping. Operator command to stop OSMC not processed. - CBR9068I
Display Detail not available for Task ctc_name. - CBR9069I
CBRHPSMC unable to process stop OSMC command. - CBR9070I
OSMC stopping. Library space management command for library-name not processed. - CBR9071I
CBRHSDSM unable to start DASD space management for storage group storage-group-name. - CBR9072I
CBRHSSG unable to start storage group storage-group-name. - CBR9073I
Stop storage group command for storage-group-name already on queue. - CBR9074I
Storage group storage-group-name not active. Stop storage group command not processed. - CBR9075I
CBRHPSG unable to stop storage group storage-group-name. - CBR9076I
Start storage group command for storage-group-name deleted from operator parameter queue. - CBR9077I
Start storage group command for storage-group-name deleted from storage management cycle queue. - CBR9078I
OSMC stopping. Stop storage group command for storage-group-name not processed. - CBR9079I
OSMC stopping. Start {Single Object Recovery command | Object Recall | Object Backup} for collection collection-name, object object-name not processed. - CBR9080I
Single object recovery already processing collection collection-name, object object-name. - CBR9081I
OSMC stopping. Display command will not be processed. - CBR9082I
Resource resource-name not active. Display command not processed. - CBR9083I
CBRHSDSP unable to process display command. - CBR9084I
Start single object recovery command for collection collection-name, object object-name already on queue. - CBR9085I
module-name unable to start {Single Object Recovery | Object Recall | Object Backup} for collection collection-name, object object-name. - CBR9086I
OSMC stopping. Start {OAM Volume Recovery | Move Volume | Recycle} command not processed. - CBR9088I
OSMC stopping. Start DASD space management command for storage group storage-group-name not processed. - CBR9089I
No storage groups defined for OSMC processing on this system in the active configuration. - CBR9090I
Module module-name was unable to obtain storage for CBRHSMSI dynamic area. - CBR9091I
Module module-name could not acquire SMS Storage Group Construct Definitions. The SMS interface reason code is SMSI reason code. The SMS interface function code is SMSI function code. The error indicator code is indicator return code. - CBR9092I
The OAM Storage Management Component unable to automatically start the Storage Groups. - CBR9093I
Stop {Move Volume | Volume Recovery} command for volser already on queue. - CBR9094I
{Move Volume | Volume Recovery} for volser not active. Stop {Move Volume | Volume Recovery} command not processed. - CBR9095I
Unable to stop {Move Volume | Volume Recovery} for volser. - CBR9096I
Start {Move Volume | Volume Recovery} command for volser deleted from operator parameter queue. - CBR9097I
MOVEVOL command for volume volser rejected. RECYCLE option is invalid for WORM tape. - CBR9098I
OSMC stopping. Stop {Move Volume | Volume Recovery} command for volser not processed. - CBR9101I
ctcname object service object-service-name GETMAIN failed for collection collection-name, object object-name's read buffer. - CBR9102I
DB2 could not find the object for collection collection-name, object name object-name in storage group storage-group-name under control task ctcname. - CBR9103I
A {READ | WRITE} error occurred during Storage Management Processing for {PRIMARY | BACKUP | BACKUP2} for Collection collection-name, Object object-name, in Storage Group storagegroup-name, on volume volser. The return code is return-code and the reason code is reason-code. - CBR9104I
Deadlock or time out occurred while selecting object name object-name in collection name collection-name in storage group storage-group data from object table. - CBR9105I
Deadlocks are occurring on the DB2 object data table, object-table-name for storage group storage-group-name. - CBR9106I
{CBRHROPT | CBRHRDFS} has incurred an error from a read request while processing object object-name in collection name collection-name in storage group storage-group-name. Error return code is return-code; reason code is reason-code. - CBR9107I
Error {defining | locating | altering} catalog entry. Catalog return code = return-code, catalog reason code = reason-code, catalog module id = module-id. - CBR9108I
Error {inserting | selecting | deleting} row for collection collection-name from collection name table, SQL error code = SQL-error-code. - CBR9109I
The control task ctcname process process-name could not {acquire | release} a buffer manager token during {read | route} processing for collection collection-name, object object-name in storage group storagegroup-name. OAM return code is return-code, reason code is reason-code. - CBR9110I
Collection-id mismatch for collection collection-name, collection-id from catalog entry is collection-id1, collection-id from DB2 row is collection-id2. - CBR9111I
Storage class name length mismatch for collection collection-name, storage class name length from catalog entry is scname-length1, storage class name length from DB2 row is scname-length2. - CBR9112I
Storage class name mismatch for collection collection-name, storage class name from catalog entry is scname1, storage class name from DB2 row is scname2. - CBR9113I
Management class name length mismatch for collection collection-name, management class name length from catalog entry is mcname-length1, management class name length from DB2 row is mcname-length2. - CBR9114I
Management class name mismatch for collection collection-name, management class name from catalog entry is mcname1, management class name from DB2 row is mcname2. - CBR9115I
Storage group name length mismatch for collection collection-name, storage group name length from catalog entry is sgname-length1, storage group name length from DB2 row is sgname-length2. - CBR9116I
Storage group name mismatch for collection collection-name, storage group name from catalog entry is sgname1, storage group name from DB2 row is sgname2. - CBR9123I
A {Read | Write} error occurred during storage management processing for PRIMARY for collection collection-name, object object-name, with instance id inst-id, in Storage Group storagegroup-name within file system directory dir-name, of type dir-type. The return code is return-code and the reason code is reason-code. - CBR9125I
module-name-: Retry processing failed for collection collection-name, object object-name in storage group storage-group-name with SQL error code SQL-err-code. - CBR9130I
control-task-name module-name attempted to update collection collection-name, object object-name in storage group storage-group-name which had been deleted. - CBR9131I
control-task-name module-name attempted to update collection collection-name, object object-name in storage group storage-group-name. The directory entry for the object was already changed. - CBR9150I
OAM update error in module module-name for optical volume volser. - CBR9151I
OAM error updating a row for tape volume volser in the TAPEVOL table. - CBR9200I
Object Processing starting for storage group storage group. - CBR9201I
Object Processing completed for storage group storage group. - CBR9202I
The cycle processing window for storage group storage-group-name has expired before object processing could be started. - CBR9203I
The cycle window for storage group storage-group-name has expired before object processing completed. Storage group processing ending. - CBR9222I
Object Processing failed during initialization for storage group storage group. - CBR9224I
Object Processing found a directory entry without an associated object for object object-name in collection collection name in storage group storage-group. - CBR9225I
One or more objects in collection collection-name were not processed by OSMC {Object Processing | DASD Space Manager | Object Recovery | Volume Recovery | Move Volume} because the object's {current location | size} is not supported by this level of OAM. - CBR9226I
One or more write requests to {tape or optical | tape | optical} were not attempted for objects larger than the maximum object size supported by the specified level of the OAM storage hierarchy in collection collection-name for OSMC {Object Storage Group | Move Volume | Recovery} Processing. - CBR9230I
Object Processing could not acquire SMS Management Class or Storage Class Construct Definitions. The SMS interface reason code is SMSI reason code. The SMS interface function code is SMSI function code. The error indicator code is indicator return code. - CBR9231I
Object Processing requires more available DASD for moving objects from optical to DASD. Objects in storage group storage group need to be moved to DASD from optical media. - CBR9232I
Object Processing did not find the object's Storage Class and/or Management Class name(s) in the DB2 Object Administration Database. Class transition, backup processing, and expiration are not possible for object object-name in collection collection-name, storage group storage-group-name. The SQL return code is sql-return-code. - CBR9233I
Object Processing does not recognize the object's Management Class name, management-class-name in the SMS Construct Definitions data. Class transition, backup processing, and expiration processing are not possible for object object-name in collection collection-name in storage group storage-group. - CBR9234I
Object Processing does not recognize the object's Storage Class name, storage-class name in the SMS Construct Definitions data. Class transition, backup processing, and expiration processing are not possible for object object-name in collection collection-name in storage group storage-group. - CBR9235I
Object Processing could not determine the format of the expiration data from the management class definition for management class. The management class definition did not specify if the expiration after object creation format was a date or number of days. - CBR9236I
Object Processing class transition failed for object object-name in collection collection-name in storage group storage-group whose management class name is management-class name and whose storage class name is storage-class name. The SMS interface reason code is SMSI-reason-code. The SMS interface function code is SMSI-function-code. The error indicator code is indicator-return-code. - CBR9239I
Object Processing could not determine the type of periodic class transition processing to be performed according to management class management-class-name. It should be a periodic transition based on one of the following, monthly, quarterly, or yearly. - CBR9241I
Object Processing could not locate the optical or tape copy of the object while performing class transition processing. The object is object-name in collection collection-name in storage group storage-group-name. - CBR9242I
Object Processing could not determine how to set the DB2 index update flag for module CBRHDUPD. The object is object-name in collection collection-name in storage group storage-group name. The index update flag is index-update-flag. - CBR9253I
A DB2 operation requested by OSMC Object Processing module-name failed with return code, RC = return-code This message is preceded by message CBR9700I and message CBR9706I. Error detected while fetching collection collection-name from the DB2 table of collection names, collection-name-table, for storage group ctc-sms-sgname. - CBR9300I
DASD Space Management starting for storage group storage group. - CBR9301I
DASD Space Management completed for storage group storage group. - CBR9322I
DASD Space Management failed during initialization for storage group storage group. - CBR9330I
DASD Space Management could not acquire SMS Management Class or Storage Class Construct Definitions. The SMS interface reason code is SMSI reason code. The SMS interface function code is SMSI function code. The error indicator code is indicator return code. - CBR9332I
DASD Space Management did not find the object's Storage Class and/or Management Class name(s) in the DB2 Object Administration Database. Expiration processing is not possible for storage group, collection collection name, object object name. SQL error code is sql-error-code. - CBR9333I
DASD Space Management does not recognize the object's Management Class name, management class name in the SMS Construct Definitions data. Expiration processing is not possible for object object name in collection collection name in storage group storage group. - CBR9334I
DASD Space Management does not recognize the object's Storage Class name, storage class name in the SMS Construct Definitions data. Expiration processing is not possible for object object name in collection collection name in storage group storage group. - CBR9335I
DASD Space Management could not determine the format of the expiration data from the management class definition for management class. The management class definition did not specify if the expiration after object creation format was a date or number of days. - CBR9350I
OSMC Summary Status: - CBR9355I
No OSMC processes are active at this time. - CBR9356I
Recycle Summary Status: - CBR9361I
Deadlock or time out occurred while selecting collection name collection-name from the storage-group storage group collection name table. - CBR9362I
Deadlocks are occurring on the DB2 collection name table, ctc-DB2-group-qualifier for storage group ctc-sms-sgname. - CBR9363I
A DB2 operation requested by OSMC DASD space management module-name failed with return code, RC = return-code This message is preceded by message CBR9700I and message CBR9706I. Error detected while fetching collection collection-name from the DB2 table of collection names, collection-name-table, for storage group ctc-sms-sgname. - CBR9364I
OSMC Summary Status 2: - CBR9370I
OSMC Detail for taskname: