CBR1120I OAM drive status:
Explanation
DRIVE DEVICE TY LIBRARY ON OP AV WP DEV SC DRV MOUNT PEND
NAME TYPE NAME NUM SI NUM VOLUME VOLUME
drvname devtype a libname b c d e ffff g hhh mntvol pndvol
The
operator has entered one of the following commands:
DISPLAY SMS,DRIVE(drive-name),DETAIL
DISPLAY SMS,DRIVE(library-name),DETAIL
DISPLAY SMS,DRIVE(ALL),DETAIL
A display of OAM drive status
has been requested. When a drive name is supplied, there is one data
line describing the specified drive; when a library name is supplied,
there is one data line for each drive in the specified library; when
ALL is supplied, there is one data line for each drive in the configuration.
The fields displayed in each data line of the multi-line message are
as follows: - drvname
- Name of the optical drive.
- devtype
- Name of the drive device type, as follows:
- 3995-111
- 3995 rewritable optical disk drive.
- 3995-112
- 3995 write-once optical disk drive.
- 3995-113
- 3995 multi-function optical disk drive.
- 3995-131
- 3995 rewritable optical disk drive.
- 3995-132
- 3995 write-once optical disk drive.
- 3995-133
- 3995 multi-function optical disk drive.
- 3995-SW3
- 3995 multi-function optical disk drive.
- 3995-SW4
- 3995 multi-function optical disk drive
- a
- Optical drive type, as follows:
- L
- Library.
- S
- Stand-alone.
- libname
- Name of the library to which the optical drive is attached. For a stand-alone/operator-accessible optical drive, this field contains the name of the pseudo-optical library that this drive is associated with in its SCDS definition.
- b
- Optical drive online status, as follows:
- Y
- Online.
- N
- Offline.
- P
- Pending offline.
- c
- Optical drive operational status, as follows:
- Y
- Operational.
- N
- Not operational.
- d
- Optical drive availability status, as follows:
- Y
- Available. The optical drive is online, operational, and not busy.
- N
- Not available.
- e
- Write Protection status as follows:
- Y
- Write protection is on. Writing to this drive is not allowed.
- N
- Write protection is off. Writing to this drive is allowed.
The write protection status reflects the switch setting as of the last volume mount, vary online or drive error processing.
- ffff
- MVS/ESA device number of the CTC which is used to communicate with the optical drive.
- g
- SCSI bus address of the optical drive on the SCSI interface. Not used for 3995 and will be blank.
- hhh
- Drive number of the optical disk drive.
- mntvol
- Volume serial number of the volume which is currently mounted on the optical drive. If there is no mounted volume, this field is blank.
- pndvol
- Volume serial number of the volume for which a mount is pending on the optical drive. If there is no pending mount, this field is blank. Will be blank when used for 3995.
If a specific optical drive is requested in
the DISPLAY SMS,DRIVE command, then the additional data line will
appear, containing XCF information about that drive, as follows:
------------------------------------------------
XCF MEMBER NAME: member-name
------------------------------------------------
The value of member-name in the data line is the XCF member name associated with the instance of OAM where this drive is currently online. If the drive is not online to any instance of OAM in the OAMplex, this field will contain blanks. If this instance of OAM is not currently part of the OAMplex, this field will contain 'N/A'.
System action
None.
Source
Object Access Method (OAM)
Routing Code
-
Descriptor Code
5,8,9