Note
How to send your comments to IBM
z/OS Version 2 Release 1 summary of changes
Controlling JES2
Controlling the JES2 environment
Specifying the Start Options
Starting Using a JCL Procedure
Starting Using the Console
Displaying JES2 status
Restarting JES2
Cold start
Warm start
Hot start
Quick start
$E MEMBER command start
Warm start processing considerations
Stopping JES2
Withdrawing JES2 from the system
Specifying JES2 exit point characteristics
Monitoring buffers
Controlling your MAS environment
Using independent–mode processing
Displaying MAS status and settings
Using JES2 and MVS commands together
Using the MVS ROUTE *ALL to expand the scope of a command
Changing MAS settings
Controlling the checkpoint definition
Specifying MAS definition parameters and initiating a checkpoint reconfiguration dialog
Making jobs eligible to restart
Controlling automatic command processing
Controlling JES2 diagnostics
Controlling JES2 tracing
Recovering from errors
Problems during JES2 Initialization
Recovery Actions for a JES2 Initialization Problem
Errors in Spool Data Set or Checkpoint I/O
Recovery Actions for a JES2 Spool or Checkpoint I/O Problem
Errors in Remote Job Entry (RJE)
Recovery Actions for an RJE Problem
Errors in Network Job Entry (NJE)
Recovery Actions for an NJE Problem
Debugging errors
Displaying module information
Controlling JES2 spooling
Spool addressing modes
Considerations for draining a spool volume
Controlling spool partitioning
Spool volume states
Migrating spool volumes
Spool migration terms
Spool migration phases
MAS migration restrictions
Moving and merging spool volumes
Calculating tracks
Allocating tracks
Controlling JES2 devices and functional subsystems
Device overview
Controlling the device environment
Controlling JES2 functional subsystems
JES2 input processing
Controlling readers
System input readers
Internal readers
JES2 output processing
Controlling printers
Starting printers
Starting a printer defined to JES2
Dynamically defining a local printer to JES2
Halting, restarting, interrupting, purging, and stopping printers
Setting output characteristics
Controlling printer output
Processing output on a 3800
Controlling punches
Remote job entry (RJE)
Specifying JES2 teleprocessing characteristics
SNA RJE considerations
Controlling the JES2/VTAM interface
Controlling RJE lines
Controlling RJE workstations
Specifying RJE workstation characteristics
Setting a terminal to automatically connect
Disconnecting an RJE workstation
Remote entry restrictions
Controlling spool offload and reload functions
Controlling offload devices
Controlling offload transmitters and receivers
Controlling jobs and output
Controlling jobs
Controlling the scope of commands
Using parameters on job-related commands
Job-related commands
Using the JOBCORR parameter
Displaying job information
Controlling job execution
Controlling JES2 initiators
Initiator commands
Controlling WLM initiators
Specifying JES2 job characteristics
JES2 job execution commands
Holding and releasing jobs
Controlling jobs at another node
Controlling job output
Specifying job output characteristics
JES2 job output commands
Controlling output groups and job output elements
Controlling a network
Controlling the NJE environment
Specifying node characteristics
Modifying transmission delays and excessive looping through a network
Modifying sign-on tolerance
Defining a symbolic destination name
Deleting a symbolic destination name
Displaying subnets and their paths across a network
Displaying node attributes
Setting node attributes
Setting node command authority
Setting node password
Starting NJE communications
Starting node communication on a BSC line
Starting node communication using SNA/VTAM
Starting node communication using TCP/IP
Controlling the JES2/VTAM interface
Controlling the JES2-TCP/IP interface
Defining and changing applications
Controlling NJE lines
Controlling NJE static connections
Controlling JES2 transmitting and receiving devices
Sending messages and commands through the network
Displaying and controlling jobs at other nodes
Command reference section
Command descriptions
Command syntax conventions
Specifications
Command syntax
Sharing JES2 commands by using system symbols
Displaying Static System Symbols
Rules and recommendations for using system symbols
Using system symbols as application identifiers
Entering multiple commands on one line
Routing JES2 command responses
Adding comments to commands
Parameter ranges
Subscript ranges
Statement range considerations
Route codes
Using wildcards
Range summary
Examples of numeric and symbolic subscripts
Using filtering to control and display information
How to read syntax diagrams
Symbols
Syntax items
Syntax examples
Keywords defined
$A A - Release all jobs
$A Job - Release held jobs
$ACTIVATE - Activate a particular level of JES2 function
$ADD APPL - Define a VTAM application to JES2
$ADD CONNECT - Dynamically add network connections
$ADD DESTID - Define a symbolic destination
$ADD FSS - Define a functional subsystem
$ADD JOBCLASS(jobclass) - Define a new job class
$ADD LINE(nnnn) - Add line
$ADD LOADMOD - Load a new Installation Load Module
$ADD LOGON(nn) - Add a logon
$ADD NETSRV(nnn) - Add a network server
$ADD PROCLIB(xxxxxxxx) - Define a new dynamic PROCLIB concatenation
$ADD PRT(nnnnn) - Define a local printer
$ADD REDIRECT - Set redirection for commands
$ADD RMT(nnnnn) - Add an RJE workstation
$ADD SOCKET(xxxxxxxx) - Add a socket
$ADD SRVCLASS(name) - Add a new permanent service class element
$B PRT(nnnnn) and $B R(nnnnn).PR(m) - Logically backspace printer output
$B PUN(nn) and $B R(nnnnn).PU(m) - Logically backspace punch output
$C A - Cancel automatic commands
$C Job - Cancel a job
$C Lnnnn.xxn - Cancel NJE device activity
$C O Job - Cancel output
$C OFFn.JR - Cancel a spool offload transmitter/receiver
$C PRT(nnnnn) and $C R(nnnnn).PR(m) - Cancel printer output
$C PUN(nn) and $C R(nnnnn).PU(m) - Cancel punch output
$C RDR and $C Rnnnn.RDm - Cancel reader activity
$D A - Display information about currently active jobs
$D ACTIVATE - Display current JES2 checkpoint level and MAS readiness for checkpoint activation to z11 level
$D ACTRMT - Display Active RJE Workstations in a MAS
$D APPL - Display JES2 SNA NJE applications
$D BUFDEF - Display JES2 buffer definitions
$D CKPTDEF - Display the checkpoint definition
$D CKPTSPACE - Display checkpoint spaces
$D CLASSGRP - Display class groups
$D COMPACT - Display JES2 compaction tables
$D CONDEF - Display console communication characteristics
$D CONNECT - Display network connections
$D DEBUG - Display the JES2 DEBUG option
$D DESTDEF - Display symbolic destination settings
$D DEStid - Display a JES2 symbolic destination
$D ESTBYTE - Display Number of Bytes Set for Jobs and their Output
$D ESTLNCT - Display number of lines for jobs and their output
$D ESTPAGE - Display number of pages set for jobs and their output
$D ESTPUN - Display number of punch pages set for jobs and their output
$D ESTIME - Display amount of time set for jobs and their output
$D EXIT - Display current characteristics of specified JES2 exit points
$D F - Display the job output forms queue
$D FSS - Display the characteristics of the specified functional subsystems
$D INITDEF - Display the number of logical initiators currently defined
$D INITINFO - Display initialization information
$D I[nnmm] - Display initiator information
$D INTRDR - Display the current INTRDR initialization statement characteristics
$D JES2 - Display the current activity in the JES2 address space
$D Job - Display information about specified jobs
$D JOBCLASS(n) - Display job class characteristics
$D JOBDEF - Display characteristics assigned to jobs
$D JOBPRTY - Display Current Job Priority Characteristics
$D L(nnnn).JR(n) - Display line and job receiver status
$D L(nnnn).JT(n) - Display the job transmitter status
$D L(nnnn).SR(n) - Display SYSOUT receiver status
$D L(nnnn).ST(n) - Display SYSOUT transmitter status
$D LINE(nnnnn) - Display a line
$D LOADmod(jxxxxxxx) - Display load module information
$D LOGON(nnn) - Display the status of JES2/VTAM interface(s) and their characteristics
$D M - Send a message
$D MASDEF - Display the multi-access spool environment
$D MEMBer - Display information about MAS members
$D MODule(jxxxxxxx) - Display assembled module information
$D N - Display job queue information
$D NETACCT - Display networking account numbers
$D NETSRV(nnnnn) - Display a network server
$D NETWORK - Display network activity
$D NJEDEF - Display the JES2 Network Environment
$D NODE(jnnnnnnn) - Display the characteristics of a node
$D O Job - Display output characteristics
$D OFF(n).JR - Display offload job receiver
$D OFF(n).JT - Display offload job transmitter
$D OFF(n).SR - Display offload SYSOUT receiver
$D OFFn.ST - Display offload SYSOUT transmitter
$D OFFLOAD - Display offload devices
$D OPTsdef - Display start options processing definitions
$D OUTCLASS(n) - Display output classes
$D OUTDEF - Display output definition options
$D OUTPRTY - Display job output priority
$D PATH - Display paths from node to node
$D PCE - Display status for JES2 processors
$D PCEDEF - Display PCE definitions
$D PRINTDEF - Display print environment characteristics
$D PROCLIB(xxxxxxxx) - Display a PROCLIB concatenation
$D PRT(nnnnn) and $D R(nnnnn).PR(m) - Display printers
$D PUNCHDEF - Display punch environment characteristics
$D PUN(nn) and $D R(nnnnn).PU(m) - Display a remote punch
$D Q - Display the number of jobs queued
$D R(nn).CON(mm) - Display the specified remote console
$D RDI - Display the status of JES2-controlled internal reader
$D RDR(nn) and $D R(nn).RD(mm) - Display command authority for a reader
$D REBLD - Display rebuild queue information
$D RECVopts - Display current RECVOPTS settings
$D REDIRect - Redirect command responses
$D REQJOBID - Display attributes of JOBID address spaces
$D SMFDEF - Display status of SMF buffers
$D SOCKET (xxxxxxxx) - Display the characteristics of a socket
$D SPOOL - Display the status of spool volumes
$D SPOOLDEF - Display the JES2 spooling environment
$D SRVCLASS(name) - Display JES2 information for the specified service class
$D SSI(nnn) - Display subsystem interface function information
$D SUBTDEF - Display subtask definitions
$D SUBNET - Display subnet connections
$D TPDEF - Display current teleprocessing characteristics
$D TRace(nnn) - Display current status of trace IDs
$D TRACEDEF - Display current trace environment characteristics
$D U - Display the status of JES2-controlled devices
$DEL CONNect - Delete network connections
$DEL DEStid - Delete a symbolic destination
$DEL JOBCLASS(jobclass) - Delete a job class
$DEL LOADmod - Remove a load module from storage
$DEL PROCLIB(xxxxxxxx) - Delete a dynamic PROCLIB concatenation
$E CKPTLOCK - Reset the checkpoint lock
$E Job - Restart a job
$E Lnnnn.xxn - Restart NJE device activity
$E LINE(nnnnn) - Restart line activity
$E LOGON(nn) - Restart the JES2/VTAM interface
$E MEMBer - Perform cleanup for a failed MAS member
$E NETSRV(nnn) - Restart a network server
$E NETWORK - Reset current network devices
$E OFFn.xx - Restart a spool offload transmitter
$E PRT(nnnnn) and $E R(nnnnn).PR(m) - Restart printer activity
$E PUN(nn) and $E R(nnnnn).PU(m) - Restart punch activity
$F PRT(nnnnn) and $F R(nnnnn).PR(m) - Logically advance printer output
$F PUN(nn) and $F R(nnnnn).PU(m) - Logically advance punch output
$G A - Release a job at another node
$G C - Cancel a job at another node
$G D - Display job information for a job at another node
$G H - Hold a job at another node
$G R, OUT - Request another node to route job output
$G R, XEQ - Request another node to route a job for execution
$H A - Hold all jobs
$H Job - Hold specific jobs
$I PRT(nnnnn) and $I R(nnnnn).PR(m) - Interrupt printer activity
$I PUN(nn) and $I R(nnnnn).PU(m) - Interrupt punch activity
$JDDETAILS - Display details summary of jobs
$JDHISTORY - Display history of JES2 resource usage
$JDJES - Display non-severe incident report
$JDMONITOR - Display current status of JES2 monitor subtasks
$JDSTATUS - Display current status
$JSTOP - Terminate monitor address space
$L Job - List job output information
$Mnn - Send commands to other MAS members
$MSPL - Migrate spool volumes
$Nnnnn - Send commands through the network
$N PRT(nnnnn) and $N R(nnnnn).PR(m) - Repeat printer output
$N PUN(nn) and $N R(nnnnn).PU(m) - Repeat punch output
$O Job - Release or cancel held output groups
$P - Stop JES2 processing
$P I[nnmm] - Stop an initiator
$P JES2 - Withdraw JES2 from the system
$P Job - Purge a job
$P Lnnnn.xxn - Stop an NJE device
$P LINE(nnnnn) - Stop a line
$P LOGON(nnnnn) - Stop the JES2/VTAM interface
$P NETSRV(nnnnn) - Stop a network server
$P O Job - Purge a job's output
$P NETWORK - Purge current network devices
$P OFFn.xx - Stop an offload transmitter/receiver
$P OFFLOADn - Stop an offload device
$P PRT(nnnnn) and $P R(nnnnn).PR(m) - Stop a printer
$P PUN(nn) and $P R(nnnnn).PU(m) - Stop a punch
$P RDRnn and $P Rnnnn.RDm - Stop a reader
$P RMT(nnnnn) - Terminate a remote terminal connection
$P SPOOL - Drain a spool volume
$P SRVCLASS(name) - Drain JES2 processing for a given service class
$P TRace - Stop a trace ID
$P XEQ - Prevents JES2 and WLM-controlled initiators from selecting work
$R - Route job output
$R XEQ - Route specific jobs for execution
$S - Start system activity
$S A - Start automatic command processing
$S I[vvvv] - Start an initiator
$S Job - Initiate a batch job into execution
$S Lnnnn.xxn - Start an NJE device
$S LINE(nnnn) - Start a line
$S LOGON - Start the JES2/VTAM interface
$S N - Start node communication on a BSC line
$S N - Start node communication on an SNA line
$S N - Start node communication on a TCP/IP line
$S NETSRV(nnn) - Start a network server
$S NETWORK - Start automatic device restart and NJE connection processing
$S OFFn.xx - Start offload transmitters and receivers
$S OFFLOADn - Start an offload device
$S PRT(nnnnn) and $S R(nnnnn).PR(m) - Start a printer
$S PUN(nn) and $S R(nnnnn).PU(m) - Start a punch
$S RDRnn and $Rnnnn.RDm - Start a reader
$S RMT(nnnnn) - Automatically connect a remote terminal
$S SPOOL - Start a spool volume
$S SRVCLASS - Start JES2 processing for a given service class
$S TRACE(nn) - Start a trace ID
$S XEQ - Allow JES2 and WLM-controlled initiators to select work
$T A - Display, specify, and modify automatic commands
$T APPL - Control JES2 applications
$T BUFDEF - Control local buffers
$T CKPTDEF - Set the checkpoint definition
$T CKPTSPACE - Set the checkpoint space
$T CONDEF - Set console communication characteristics
$T CONNect - Change static network connections
$T DEBUG - Set the JES2 DEBUG option
$T DESTDEF - Control JES2 symbolic destination displays
$T DEStid - Control a JES2 symbolic destination
$T ESTBYTE - Control the default spool space utilization per job
$T ESTIME - Control the default execution time
$T ESTLNCT - Control the default print line count per job
$T ESTPAGE - Control the default page count per job
$T ESTPUN - Control the default punched card output per job
$T EXIT(nnn) - Control JES2 installation exit points
$T FSS - Control a functional subsystem
$T Init(nnmm) - Control initiators
$T INTRDR - Control internal readers
$T Job - Change a job's class, scheduling priority, or affinity
$T JOBCLASS - Set job class characteristics
$T JOBDEF - Set job processing characteristics
$T JOBPRTY(n) - Set job scheduling characteristics
$T L(nn).JT(nn) - Specify network job transmitter characteristics
$T L(nnnn).ST(n) - Specify network SYSOUT transmitter characteristics
$T LINE(nnnnn) - Control a line
$T LOADmod - Refresh a load module from storage
$T LOGON(nnn) - Control the JES2/VTAM interface
$T MASDEF - Control the multi-access spool environment
$T MEMBer - Change a member's operational mode
$T NETSRV(nnnnn) - Modify the attributes of a network server
$T NJEDEF - Control JES2 network environment
$T NODE(jnnnnnnn) - Set the characteristics of a node
$T NUM - Set the JES2 internal job numbers
$T O Job - Set output characteristics
$T OFF(n).JR - Set offload job receiver characteristics
$T OFF(n).JT - Set offload job transmitter characteristics
$T OFF(n).SR - Set offload SYSOUT receiver characteristics
$T OFF(n).ST - Set offload SYSOUT transmitter characteristics
$T OFFLOAD(n) - Set offload device characteristics
$T OUTCLASS(n) - Set SYSOUT class characteristics
$T OUTDEF - Set job output characteristics
$T OUTPRTY(n) - Set output scheduling priorities
$T PCE - Control JES2 processors
$T PRINTDEF - Control the JES2 print environment
$T PROCLIB(xxxxxxxx) - Modify an existing dynamic PROCLIB concatenation
$T PRT(nnnnn) and $T R(nnnnn).PR(m) - Control a printer
$T PUN(nn) and $T R(nnnnn).PU(m) - Control a punch
$T RDI - Control an internal reader
$T RDRnn and $T Rnnnn.RDm - Control a reader
$T RECVopts - Set JES2 recovery options
$T REDIRect - Redirect command responses
$T RMT(nnnnn) - Change an RJE workstation
$T REQJOBID - Set JOBID attributes
$T SMFDEF - Control SMF buffers
$T SOCKET (xxxxxxxx) - Control a socket
$T SPOOL - Modify a spool volume
$T SPOOLDEF - Set the JES2 spooling environment
$T SRVCLASS(name) - Modify JES2 information for the specified service class
$T SSI(nnn) - Control the subsystem interface definition
$T TPDEF - Set JES2 teleprocessing characteristics
$T TRACE(nn) - Modify a trace ID
$T TRACEDEF - Control the trace facility
$VS - Enter MVS system commands through JES2
$Z A - Halt automatic command processing
$ZAPJOB - Remove job structure from job queue
$Z I[vvvv] - Halt initiator activity
$Z NETWORK - Halt automatic network connection and device processing and drain NJE devices
$Z OFFLOADn - Halt offload activity
$Z PRT(nnnnn) and $Z R(nnnnn).PR(m) - Halt printer activity
$Z PUN(nn) and $Z R(nnnnn).PU(m) - Halt punch activity
$Z RDRnn - Halt reader activity
$Z SPOOL - Halt a spool volume
Accessibility
Notices
Programming Interface Information
Trademarks