|
Function To display printer work selection
and processing characteristics.
This command has parameters
you can use as a filtering technique to limit the type of information
to search, or the amount of information to display. See Using filtering to control and display information for additional information.
Syntax
>>-$D----------------------------------------------------------->
>--+-PRINTER-+--+----------------------------------------+------>
'-PRT-----' +-nnnnn--+-----------+-------------------+
| '- ---+-m-+-' |
| '-*-' |
| .-,----------------------------. |
| V | |
'-(------+-nnnnn-+--+-----------+---+--)-'
'-*-----' '- ---+-m-+-'
'-*-'
>--+------------------+--+---------------------------------+---->
'-L--=--+-a------+-' '-| Selection limiting keywords |-'
+-name---+
'-name-a-'
>--+-------------------------------+---------------------------><
'-| Display limiting keywords |-'
Display limiting keywords
|--+----------+--+---------+------------------------------------>
'-,--Burst-' '-,--CCTL-'
>--+---------------------------------------------------------+-->
'-,--+-CHAR-+--+----------------------------------------+-'
'-X----' +-nnnnn--+-----------+-------------------+
| '- ---+-m-+-' |
| '-*-' |
| .-,----------------------------. |
| V | |
'-(------+-nnnnn-+--+-----------+---+--)-'
'-*-----' '- ---+-m-+-'
'-*-'
>--+-------------+--+-------------+--+-------------+------------>
'-,--CKPTLINE-' '-,--CKPTMODE-' '-,--CKPTPAGE-'
>--+------------+--+-------------+--+------------+-------------->
'-,--CKPTSEC-' '-,--COPYMARK-' '-,--CReator-'
>--+-----------+--+-------------+--+----------+----------------->
'-,--DEVFCB-' '-,--DEVFLASH-' '-,--EJECT-'
>--+------------+--+--------------+--+----------+--------------->
'-,--+-C---+-' '-,--+-FLASH-+-' '-,--Forms-'
'-FCB-' '-O-----'
>--+-------------+--+-=--+--+-Yes-+--+--------+----------------->
'-,--FSAROLTR-' '-^=-' '-No--' '-,--FSS-'
>--+--------------------------------------------+--------------->
'-,--FSSINFO--+----------------------------+-'
| .-,------------. |
| V | |
'-=--( ---+-ASID-----+-+--)-'
+-FSSMADDR-+
+-FSSMAPAR-+
+-FSSMLENG-+
+-FSSMPTF--+
+-HASPFSSM-+
+-NAME-----+
'-PROC-----'
>--+------------+--+----------+--+---------+--+---------+------->
'-,--JOBname-' '-,--LIMit-' '-,--LONG-' '-,--Mark-'
>--+---------+--+---------------+--+---------+------------------>
'-,--MODE-' '-,--+-MODIFY-+-' '-,--NAME-'
'-Y------'
>--+------------+--+---------+--+----------+--+---------+------->
'-,--NEWPAGE-' '-,--NPRO-' '-,--Pause-' '-,--PLIM-'
>--+-------------+--+-----------+--+--------------+------------->
'-,--PRESELCT-' '-,--PRMode-' '-,--+-Queue-+-'
'-Class-'
>--+---------+--+----------+--+-------------+--+--------+------->
'-,--PROC-' '-,--RANGE-' '-,--Routecde-' '-,--Sep-'
>--+-------------+--+----------+--+----------+------------------>
'-,--SEPCHARS-' '-,--SEPDS-' '-,--SETUP-'
>--+--------------+--+------------+--+----------+--------------->
'-,--+-K-----+-' '-,--SUSPEND-' '-,--TRace-'
'-SPACE-'
>--+----------+--+------------+--+------------+----------------->
'-,--TRANS-' '-,--TRKCELL-' '-,--+-T---+-'
'-UCS-'
>--+-------------+--+---------+--+-----------+--+-----------+--->
'-,--UCSVerfy-' '-,--UNIT-' '-,--Volume-' '-,--Writer-'
>--+-------+----------------------------------------------------|
'-,--WS-'
Selection limiting keywords
|--+----------------------------------+------------------------->
'-,--+---+--Burst--+-=--+--+-No--+-'
'-/-' '-^=-' '-Yes-'
>--+---------------------------------+-------------------------->
'-,--+---+--CCTL--+-=--+--+-----+-'
'-/-' '-^=-' +-No--+
'-Yes-'
>--+--------------------------------------+--------------------->
'-,--+---+--CKPTMODE--+-=--+--+-PAGE-+-'
'-/-' '-^=-' '-SEC--'
>--+------------------------------------------+----------------->
'-,--+---+--COPYMARK--+-=--+--+-CONSTANT-+-'
'-/-' '-^=-' +-DATASET--+
+-DEFAULT--+
'-JOB------'
>--+------------------------------------+----------------------->
'-,--+---+--CReator--+-=--+--creator-'
'-/-' +-^=-+
+->--+
'-<--'
>--+----------------------------------+------------------------->
'-,--+---+--DEVFCB--+-=--+--devfcb-'
'-/-' +-^=-+
+->--+
'-<--'
>--+--------------------------------------+--------------------->
'-,--| / |--DEVFLASH--+-=--+--devflash-'
+-^=-+
+->--+
'-<--'
>--+----------------------------------+------------------------->
'-,--+---+--EJECT--+-=--+--+-----+-'
'-/-' '-^=-' +-No--+
'-Yes-'
>--+--------------------------------+--------------------------->
'-,--+-+---+--C---+--+-=--+--fcb-'
| '-/-' | +-^=-+
'-+---+--FCB-' +->--+
'-/-' '-<--'
>--+------------------------------------+----------------------->
'-,--+-+---+--FLASH-+--+-=--+--flash-'
| '-/-' | +-^=-+
'-+---+--O-----' +->--+
'-/-' '-<--'
>--+---------------------------------------------------+-------->
'-,--+---+--Forms--+-=--+--+-form-----------------+-'
'-/-' '-^=-' | .-,----------. |
| V (1) | |
'-(----------form-+--)-'
>--+-------------------------------------+---------------------->
'-,--+---+--FSAROLTR--+-=--+--+-No--+-'
'-/-' '-^=-' '-Yes-'
>--+----------------------------+------------------------------->
'-,--+---+--FSS--+-=--+--fss-'
'-/-' +-^=-+
+->--+
'-<--'
>--+------------------------------------------------------------------------+-->
| .-,-------------------------------------. |
| V | |
'-,--+---+--FSSINFO--=--( ---+-+---+--ASID--+-=--+--asid---------+-+--)-'
'-/-' | '-/-' +-^=-+ |
| +->--+ |
| '-<--' |
+-+---+--FSSMADDR--+-=--+--fssmaddr-+
| '-/-' +-^=-+ |
| +->--+ |
| '-<--' |
+-+---+--FSSMAPAR--+-=--+--fssmapar-+
| '-/-' +-^=-+ |
| +->--+ |
| '-<--' |
+-+---+--FSSMLENG--+-=--+--fssmleng-+
| '-/-' +-^=-+ |
| +->--+ |
| '-<--' |
+-+---+--FSSMPTF--+-=--+--fssmptf---+
| '-/-' +-^=-+ |
| +->--+ |
| '-<--' |
+-+---+--HASPFSSM--+-=--+--haspfssm-+
| '-/-' +-^=-+ |
| +->--+ |
| '-<--' |
+-+---+--NAME--+-=--+--name---------+
| '-/-' +-^=-+ |
| +->--+ |
| '-<--' |
'-+---+--PROC--+-=--+--proc---------'
'-/-' +-^=-+
+->--+
'-<--'
>--+------------------------------------+----------------------->
'-,--+---+--JOBname--+-=--+--jobname-'
'-/-' +-^=-+
+->--+
'-<--'
>--+---------------------------------+-------------------------->
'-,--+---+--Mark--+-=--+--+-----+-'
'-/-' '-^=-' +-No--+
'-Yes-'
>--+--------------------------------------------+--------------->
'-,--+---+--MODE--+-=--+--+-FSS------------+-'
'-/-' '-^=-' +-FSS(SWITCHING)-+
+-JES------------+
'-JES(SWITCHING)-'
>--+--------------------------------------+--------------------->
'-,--+-+---+--MODIFY-+--+-=--+--modify-'
| '-/-' | +-^=-+
'-+---+--Y------' +->--+
'-/-' '-<--'
>--+----------------------------------------+------------------->
'-,--+---+--NEWPAGE--+-=--+--+-ALL-----+-'
'-/-' '-^=-' +-DEFAULT-+
'-1-------'
>--+----------------------------------+-------------------------|
'-,--+---+--STATUS--+-=--+--Active-'
'-/-' '-^=-'
/
|--+---+--------------------------------------------------------|
'-/-'
Notes: - form can be coded up to 8 times
|--+----------------------------------+------------------------->
'-,--+---+--Pause--+-=--+--+-----+-'
'-/-' '-^=-' +-No--+
'-Yes-'
>--+-------------------------------------+---------------------->
'-,--+---+--PRESELCT--+-=--+--+-No--+-'
'-/-' '-^=-' '-Yes-'
>--+------------------------------------+----------------------->
'-,--+-+---+--CLass-+--+-=--+--queue-'
| '-/-' | +-^=-+
'-+---+--Queue-' +->--+
'-/-' '-<--'
>--+--------------------------------+--------------------------->
'-,--+---+--Sep--+-=--+--+-----+-'
'-/-' '-^=-' +-No--+
'-Yes-'
>--+-----------------------------------------+------------------>
'-,--+---+--SEPCHARS--+-=--+--+-CURRENT-+-'
'-/-' '-^=-' '-DEFAULT-'
>--+----------------------------------+------------------------->
'-,--+---+--SEPDS--+-=--+--+-----+-'
'-/-' '-^=-' +-No--+
'-Yes-'
>--+-------------------------------------+---------------------->
'-,--+---+--SETUP--+-=--+--+-HALT---+-'
'-/-' '-^=-' '-NOHALT-'
>--+-----------------------------------------+------------------>
'-,--+-+---+--K-----+--+-=--+--+--------+-'
| '-/-' | '-^=-' +-DOUBLE-+
'-+---+--SPACE-' +-R------+
'-/-' +-RESET--+
+-SINGLE-+
+-TRIPLE-+
+-1------+
+-2------+
'-3------'
>--+----------------------------------+------------------------->
'-,--+---+--TRace--+-=--+--+-No--+-'
'-/-' '-^=-' +-P---+
'-Yes-'
>--+--------------------------------------+--------------------->
'-,--+---+--TRANS--+-=--+--+-DEFAULT-+-'
'-/-' '-^=-' +-No------+
'-Yes-----'
>--+------------------------------------+----------------------->
'-,--+---+--TRKCELL--+-=--+--+-No--+-'
'-/-' '-^=-' '-Yes-'
>--+--------------------------------+--------------------------->
'-,--+-+---+--T---+--+-=--+--ucs-'
| '-/-' | +-^=-+
'-+---+--UCS-' +->--+
'-/-' '-<--'
>--+-------------------------------------+---------------------->
'-,--+---+--UCSVerfy--+-=--+--+-No--+-'
'-/-' '-^=-' '-Yes-'
>--+------------------------------+----------------------------->
'-,--+---+--UNIT--+-=--+--unit-'
'-/-' +-^=-+
+->--+
'-<--'
>--+----------------------------------+-------------------------|
'-,--+---+--Writer--+-=--+--writer-'
'-/-' +-^=-+
+->--+
'-<--'
Parameters - nnnnn
- For PRT,
the identifier of the local printer (1-32767) to display. For R,
the identifier of the remote workstation (1-32767) that is attached
to printer m (1-7).
- m
- The identifier of the printer (1-7) that is attached to the remote
workstation Rnnnnn (1-32767).
- CCTL
-
CCTL={YES|NO}
Displays whether (YES) or not (NO) JES2
places carriage control characters in the output stream transmitted
to this remote printer. If you specify CCTL=NO, JES2 neither compresses
(COMPRESS=NO) nor compacts (COMPACT=NO) data, and standard character
string (SCS) control characters are not placed in the output string.
Note: The
CCTL= parameter applies to remote printer and SNA devices only.
- Burst
- Displays whether the printed output
from this 3800 printer is burst into separate sheets (Yes) or continuous
fanfold form (No).
- CHAR(1-4)|X1-4
- Displays the 1 to 4 character identifier
for the first through fourth character arrangement tables to be used
in the specified 3800 printer.
- CKPTLINE
- Displays the maximum number of lines
(range 0-32767) in a logical page. JES2 uses this value, with the
CKPTPAGE value, to determine when to take output checkpoints.
- CKPTMODE
- Displays whether the functional
subsystem is to take checkpoints based upon page count (PAGE) or elapsed
time (SEC).
- CKPTPAGE
- Displays the number (1-32767) of
logical pages to be printed before each output checkpoint is taken
by JES2. This parameter and CKPTLINE control the amount of checkpoint
activity to spool.
- CKPTSEC
- Displays the number of seconds (0-32767)
to elapse before each output checkpoint is taken. This parameter is
valid only for a printer under the control of a functional subsystem.
- CLass|Queue
- Displays, in priority sequence,
the output class(es) (A-Z, 0-9) this printer is to process.
- COPYMARK
- Displays whether indicators of SYSOUT
separation markings are incremented on a data set level (DATASET),
on a job output element level (JOB), or not at all (CONSTANT).
- CReator
- Displays the 1 through 8 character
userid that creates the SYSOUT data sets to be processed.
- DEVFCB
- Displays the forms control buffer
(FCB) this printer uses if the printer selects output that does not
have an FCB associated with it.
- DEVFLASH
- Displays the 1 to 4 character device
default forms FLASH ID.
- EJECT={YES | NO}
- Displays whether JES2 sends a page
eject to a remote printer on the printer's first use following the
start of an RJE session, depending upon the assumed position of the
printer. JES2 assumes that the remote printer is not positioned at
the top of a page on the first use after JES2 is started, restarted,
or after an RJE session fails and the remote printer is not at the
top of a page.
EJECT=Yes causes JES2 to send a page eject when
the remote printer is not assumed to currently be at the top of a
page. Use this parameter value when the output is destined for a physical
printer.
EJECT=No ensures that a print stream never begins
with a page eject. Workstations that write SYSOUT to media other than
paper can use this parameter to create files that do not contain page
ejects in the first line.
- FCB|C
- Displays the forms control buffer
(FCB) image or the carriage control tape initially mounted on this
remote printer.
- FLASH|O
- Displays the 1 to 4 character identifier
of the forms overlay frame for the specified 3800 printer.
- Forms
- Displays the 1 through 8 character
name of the forms loaded into this printer.
- FSAROLTR={YES|NO}
- Specifies whether the internal rolling
trace for an FSS printer is activated or deactivated.
- FSS
- Displays a 1 to 8 character functional
subsystem name that supports a page-mode printer.
- FSSINFO
- Displays information about the FSS
associated with this MODE=FSS printer. This data is only displayed
when LONG is specified on the display command.
- ASID
- Displays the address space identifier
(ASID) for this printer.
- FSSMADDR
- Displays the virtual address of
the HASPFSSM module used by this printer (in the address space indicated
by ASID=).
- FSSMAPAR
- Displays the APAR number of the
latest maintenance applied to the HASPFSSM module used by this printer.
- FSSMLENG
- Displays the length of the HASPFSSM
module used by this printer.
- FSSMPTF
- Displays the last maintenance applied
to the HASPFSSM module used by this printer.
- HASPFSSM
- Displays the name of the load module
that is loaded into the functional subsystem address space (ASID).
- NAME
- Displays the name of the FSS used
by this printer.
- PROC
- Displays the name of the procedure
that contains the JCL to start the FSS.
- JOBname
- Displays the 1 through 8 character
name of jobs whose output is selected by this remote printer. A null
parameter of (JOBNAME=) specifies that jobname is not a criterion
for output selection.
- LIMit
- Displays the lower and upper limits
(in records) for the size of output that is selected by this printer.
For further information about this parameter, refer to the $T PRTnnnn
command.
- LONG
- Displays additional information.
Note: Because
LONG automatically triggers a "long" display, you cannot add additional
display-limiting parameters on this command; however, you can add
selection-limiting parameters.
- Mark
- Displays whether (Yes) or not (No)
the edge of the separator page is marked.
- MODE
- Displays whether the printer is under
the control of a functional subsystem or JES2.
- MODIFY|Y
- Displays the 1 to 4 character identifier
of the copy modification module for the specified 3800 printer.
- NEWPAGE
- Displays whether JES2 will treat
a ‘skip to channel' or ‘skip to any channel' as a new page.
- NPRO
- Displays the non-process runout
time in seconds (0-3600).
- Pause
- Displays whether (Yes) or not (No)
the local printer pauses between data sets.
- PLIM
- Displays the lower and upper page
limits for the size of output selected by this printer.
- PRESELCT
- Displays whether (Y) or not (N)
JES2 preselects data sets for this printer. If PRESELCT=N, data sets
are selectable by any device.
- PRMode
- Displays the SYSOUT mode(s) (1 to
8 alphanumeric characters) processed by this remote printer.
For
more information about this parameter, refer to the $T PRT(nnnn) command.
For a list of valid process-mode values, see your system programmer.
- PRTnnnnn
- The identifier of the printer (1-32767).
- RANGE
- Displays the range of batch jobs
(J), started tasks (S), or time sharing users (T) whose output is
selected by this remote printer.
- Routecde
- Displays as many as four internal
route codes assigned to this remote printer. A route code indicates
that this printer is eligible for print routing. The value for all
routing numbers can range from 1 to 32767. For specification requirements,
refer to Route codes.
- Sep
- Displays whether (YES) or not (NO)
separator cards are provided initially between data set groups.
- SEPCHARS
- Displays the character arrangement
table to use for separator pages printed on the 3800 printer.
- SEPDS
- Displays whether (Y) or not (N)
a header separator page is to be produced for each copy of each data
set within an output group. JES2 invokes EXIT 15 (Output Data Set/Copy
Separators), if enabled, to generate separator pages.
- SETUP
- Displays whether (HALT) or not (NOHALT)
JES2 is to halt the printer and issue the $HASP190 message requesting
the operator to verify the output control specifications when the
output requirements for a particular job differ from the output characteristics
specified for the printer. (If halted, the punch must be restarted
using the $S command.)
- SPACE|K
- Displays the spacing for printed
output: 1=single; 2=double; 3=triple.
- SUSPEND
- Displays whether a remote printer
can (No) or cannot (Yes) use the printer-interrupt feature which allows
the remote operator to interrupt printing for the transmitting of
jobs or JES2 commands to this JES2 system. This parameter applies
only to printers that are connected to BSC hardware terminals.
- STATUS
- Displays the current status of the
printer, the job active on the printer, and the number of pages or
lines printed. Valid printer status values are:
- ACTIVE - JES2 is using the device for job processing and will
continue to do so as long as there are jobs available and eligible
for that device.
- BUSY - A device in FSS mode is unable to respond with the current
status because a previous command is being processed for this device.
- DRAINED - JES2 is not using the device and will not do so until
the device is started using a $S command.
- DRAINING - JES2 is currently using the device for the processing
of jobs, but will discontinue its use upon completion of the current
function.
- ENDED - A non-recoverable ABEND occurred during processing for
this device. JES2 has suspended all processing for this device. At
the time the device was suspended, work might still have been assigned
to the device. All processing on that work has also been suspended.
You need to perform a JES2 hot start to recover the device and any
work assigned to it.
- HALTED - JES2 has either requested operator assistance or the
operator has halted the device ($Z) and is waiting for the device
to be started using a $S command.
- INACTIVE - JES2 is not using the device but would do so if jobs
were available and eligible for that device.
- INTERVENTION - An FSS-controlled printer requires operator intervention.
- NOT RESPONDING - The FSA informed JES2 that the device is no longer
responding to the FSA.
- NOT RESPONDING,INTERVENTION - The FSA informed JES2 that the device
is no longer responding to the FSA. Device intervention is required.
To determine why the device is not responding, check the device and/or
the communication components (for example, VTAM®).
- PAUSED - JES2 has paused between jobs during printing or punching.
The specified device will not be used until it is started ($S command)
or it has been reset from a not-ready to a ready state.
- STARTING - The device is in the process of being started. This
status is only possible for FSS-owned devices and initiators.
- TRANS
- Displays whether data translation
is affected.
- TRKCELL
- Displays whether (YES) or not (NO)
data sets that belong to a SYSOUT class with the track-cell characteristic
are read from the spool in one operation. The TRKCELL= parameter
on the SPOOLDEF initialization statement specifies the number of records
in the track cell.
- TRace
- Displays whether (Yes) or not (No)
tracing is activated for this print processor.
- UCS|T
- Displays the 1– to 4–character identifier
of the print train, print chain, or print band that is mounted on
this impact printer. This identifier resides in SYS1.IMAGELIB.
- UCSVerfy
- Displays whether (YES) or not (NO)
UCS verification processing is performed when a UCS image is loaded
for 4245 and 4248 printers. UCS images are loaded on these printers
only when required for print processing; they are not loaded
in response to a $T PRT command that specifies a change in UCS setup.
- UNIT
- Displays a 4–digit device number.
- Volume
- Displays the 5– to 6–character volume
serial number of a volume containing a spool data set.
- Writer
- Displays the 1– through 8–character
writer name assigned to this remote printer.
- WS
- Displays
the work selection criteria for this remote printer.
- L=a|name|name-a
- The area (a), console name (name),
or console name and output area (name-a) of the active MCS console
at which the requested display appears.
Authority Required This command requires display authority.
The description of the $T RDRnn command explains how to ensure that
the authority of the appropriate MVS™ system
command group is assigned. The $T INTRDR command sets the command
authority for internal readers.
This command requires read security
access authority. For a description of assigning command input authority,
see z/OS JES2 Initialization and Tuning Guide, SA32-0991.
Scope Single member. The response
to this command will be a display of information about this member
only. You might want to use this command to get information about
all members in the MAS. To do so, you can use the MVS ROUTE
*ALL command to issue this command to all active members (if the JES2
command character is the same on all members). See z/OS MVS System Commands, SA38-0666 for
more information on using the ROUTE *ALL command.
Messages The $HASP603 message displays
the status of the printers.
Examples 1 $dprt1
$HASP603 PRT1 UNIT=0017,STATUS=HALTED,(STC00008 DIP),
$HASP603 BURST=NO,CHAR(1)=GT10,CKPTLINE=0,
$HASP603 CKPTMODE=PAGE,CKPTPAGE=100,CKPTSEC=0,
$HASP603 CREATOR=,DEVFCB=,DEVFLASH=****,FCB=STD3,
$HASP603 FORMS=(STD,,,,,,,),FSS=BLUEBERY,HONORTRC=YES,
$HASP603 JOBNAME=,LASTFORM=STD,LIMIT=(0,*),
$HASP603 COPYMARK=DATASET,MARK=NO,MODE=JES,
$HASP603 NEWPAGE=DEFAULT,NPRO=300,PAUSE=NO,PLIM=(0,*),
$HASP603 PRESELCT=YES,PRMODE=(LINE),QUEUE=A,RANGE=(J1,
$HASP603 999999),ROUTECDE=(LOCAL),SEP=YES,
$HASP603 SEPCHARS=DEFAULT,SEPDS=NO,SETUP=HALT,SPACE=,
$HASP603 TRACE=NO,TRANS=DEFAULT,TRKCELL=NO,UCS=GT10,
$HASP603 UCSVERFY=NO,VOLUME=(,,,),WRITER=,
$HASP603 WS=(W,Q,R,PRM,LIM/F,UCS,FCB),FSAROLTR=NO
JES2
displays detailed information about local printer 1 that has been
defined. 2 $dprt6,class
$HASP603 PRT16 QUEUE=X
JES2 displays the
output class to be processed by local printer 6. 3 $dr1.pr1,eject,suspend
$HASP603 R1.PR1 EJECT=YES,SUSPEND=YES
JES2
displays that printer 1 on remote 1 can use the printer-interrupt
feature and does eject a page when not starting at the top of a page.
4 $dr(*).pr(*),eject,suspend
$HASP603 R1.PR1 EJECT=YES,SUSPEND=YES
$HASP603 R2.PR1 EJECT=YES,SUSPEND=YES
$HASP603 R3.PR1 EJECT=YES,SUSPEND=YES
$HASP603 R4.PR1 EJECT=YES,SUSPEND=YES
$HASP603 R5.PR1 EJECT=YES,SUSPEND=YES
$HASP603 R5.PR2 EJECT=YES,SUSPEND=YES
$HASP603 R24.PR1 EJECT=YES,SUSPEND=YES
$HASP603 R24.PR2 EJECT=YES,SUSPEND=YES
JES2
displays only the status of eject and suspend parameters for all remote
printers in the MAS complex. 5 $dr1.pr1,suspend
$HASP603 R1.PR1 SUSPEND=YES
JES2 displays
only the status of the SUSPEND parameter for remote printer 1.
|