Product Documentation
Abstract
Instructions for installing Riser card - IBM eServer xSeries 346
Content
Text from the audio portion of the Riser card installation movie
Install the riser cards:
- Install the full-length riser card by inserting the card straight into the slot using the alignment channel as a guide, and then rotate the latch handle to the closed position to seat.
- Install the low-profile riser card by inserting the card straight into the slot using the latch bar as a guide and push down until secured by the latches.
Note: The movie above will give you a closer look at the alignment of the latch bar.
- Close the cover by positioning the cover over the chassis aligning the tabs in the cover with the slots in the chassis.
- Slide the cover forward while rotating the cover release latch to the closed position.
Note: The movie above will give you a closer look at the cover tab and the slot in the chassis.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20Q","label":"xSeries 346"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-58199