Product Documentation
Abstract
Procedures for removing the diskette drive from the xSeries 306 server.
Content
Text from the audio portion of removing the diskette drive movie
To remove the diskette drive:
-
Remove the cover:
- Turn off the server and all attached peripheral devices.
- Disconnect all power cords and all external signal cables.
- Loosen the captive screw on the rear of the server, then slide the cover to the rear and lift it off.
-
Remove the front bezel:
- Press in on the two blue latches and rotate the bezel down and off the server.
Note: that the power and reset button covers may come off with the bezel. The bezel can be removed without removing the top cover.
- Press in on the two blue latches and rotate the bezel down and off the server.
-
Remove the diskette drive:
- Lift the tabs on the Ziff connector to release the cable and disconnect it.
- Release the spring retainer and remove it.
- Lift the diskette drive out of the system.
- To replace the diskette cable, disconnect it at both ends and remove it.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20K","label":"xSeries 306"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-55247