Product Documentation
Abstract
Procedures for installing the diskette drive on the xSeries 306 server.
Content
Movie player help |
Text from the audio portion of installing the diskette drive movie
|
---|
To install the diskette drive:
- Position the diskette drive in the bay while aligning the hole in the drive with the tab in the frame.
- Rotate the drive down
- Position the spring retainer in the two holes in the drive and secure it under the latch.
- Insert the cable in the Ziff connector and press down on the retainer to secure.
-
Install the front bezel:
- Place the alignment tabs on the bottom of the bezel into the cutouts on the server and rotate the bezel up until it latches into place.
-
To install the cover:
- Position the cover over the server, while aligning the posts on the cover with the cutouts in the chassis.
- Slide the cover to the front and secure with the single thumbscrew.
- View the diskette drive removal movie
- View detailed installation and removal instructions for the xSeries 306
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20K","label":"xSeries 306"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-55246