Explanation
A hardware error has occurred. A unit
at one end of a optical interface link has detected a problem in the
link or in one of the units attached to the link. As a result, data
transfer across the link is degraded.
In the message text:
- CHPID=nn | **
- The reporting CHPID is not always associated with the actual link
incident and might just represent the CHPID that is used to report
the link incident. Therefore, never make the assumption that the reporting
CHPID is associated with the link incident; instead, the incident
unit should be analyzed by hardware support to determine the link
incident source.
"**" indicates the reporting source was not a channel
path.
- INCIDENT UNIT unit-ident
- The unit that detected the problem. The unit-ident contains
the following fields:
- TM=tttttt/mdl SER=mmmpp-ssssss IF=xxxx
- TM=tttttt/mdl
- tttttt - machine type mdl -
model number
- SER=mmmpp-ssss
- mmm - manufacturer pp -
manufacturing plant ssssss - the right-most six
characters of the unit sequence number - commonly known as the serial
number
- IF=xxxx
- xxxx- physical interface number
- IC=yy
- The incident code that identifies the type of incident that occurred.
This code is used by service personnel to help diagnose the problem.
- INCIDENT UNIT logical interface ident
- The unit that detected the problem. The logical interface
ident contains the following fields:
- LIF={zz | NOT
APPLICABLE}
- LIF={zz | NOT APPLICABLE}
- If it is available and is applicable, the logical interface
number, zz, appears in this line. If the logical
interface number is available but is not applicable, NOT APPLICABLE
appears. If it is not available, this line is not displayed.
- INCIDENT UNIT DATA COULD NOT BE OBTAINED
- Either the incident unit could not be identified or it could be
identified but the information may not be current and cannot be verified
due to some problem, such as, loss of light.
- ATTACHED UNIT unit-ident
- The unit connected to the other end of the link. (The contents
of unit ident were described previously.)
- ATTACHED UNIT logical interface ident
- The unit connected to the other end of the link. (The contents
of logical interface ident were described previously.)
System action
The node is degraded. The system writes an error
record to the logrec data set.
Operator response
Format and print the logrec data set error
records and call hardware support.
Source
Input/output supervisor (IOS)
Module
Routing code
Descriptor code