Explanation
text is one of the following: - RESERVE LOST
- CANNOT RE-RESERVE
- RESERVED ON FAILING PATH yy
- RESERVE MAY BE LOST
- MAY BE RESERVED ON PATH yy
- ASSIGN LOST
- CANNOT RE-ASSIGN
- WAS RESERVED
- WAS ASSIGNED
- STILL RESERVED
- STILL ASSIGNED
- ASSIGNED ON FAILING PATH yy
An error occurred on the specified channel path when the
system:
- Reserved a device
- Assigned a device
- Was trying to reserve or release a device
Either the device is no longer reserved or assigned, or
the system cannot use the channel path.
In the message text:
- dev
- The device number.
- BOXED
- The system boxed the device.
- FORCED OFFLINE
- The system forced the device offline.
- RESERVE LOST
- The reserve status of the device is lost. Other processors that
share the device can access it.
- CANNOT RE-RESERVE
- The system removed the reserve status from the device. The system
stops other processors that share the device. The system could not
reserve the device again. When the system restarts other processors
that share the device, these processors can access the device.
- RESERVED ON FAILING PATH yy
- The device is reserved on the failing channel path. Other processors
that share the device cannot access it.
- RESERVE MAY BE LOST
- The reserve status of the device may be lost. Other processors
that share the device may be able to access it.
- MAY BE RESERVED ON PATH yy
- A reserve or release to the device was in progress over the specified
channel path when the channel path error occurred. The system did
not update the volume on the device. The device may still be reserved.
Other processors that share the device may not be able to access it.
- ASSIGN LOST
- The assign status of the device is lost. Other processors that
share the device can assign it.
- CANNOT RE-ASSIGN
- The system removed the assign status from the device. The system
stopped other processors that share the device' The system could not
re-assign the device. When the system restarts other processors that
share the device, these processors can assign the device.
- WAS RESERVED or WAS ASSIGNED
- The status of the device is no longer reserved or assigned.
- STILL RESERVED or STILL ASSIGNED
- The status of the device remains reserved or assigned.
- ASSIGNED ON FAILING PATH yy
- The device is still assigned on the failing channel path. Other
processors that share the device cannot assign it.
System action
The system forces the device offline, or boxes
the device, as follows:
- The I/O on the device is ended.
- Any new I/O requests result in permanent I/O errors.
- The system does not perform new allocations for the device.
- If the device was online, the system marks it pending offline.
A pending offline device goes offline when the following conditions
occur, in this order:
- The device is no longer allocated to any job.
- Allocation can get the necessary resources to process the request.
- If the device was offline, it remains offline.
Operator response
If the system forced the device offline, do
the following:
- Consult your installation's operating procedures.
- Enter a VARY dev,ONLINE command to bring the
device online. Wait for the device to go entirely offline before doing
so.
- Contact hardware support.
If the system boxed the device, recover the device as
follows:
- Vary the boxed device offline to all sharing systems.
- Isolate the failing control unit for repair.
- Determine the range of affected devices.
- Contact hardware support.
- Bring the device online to allow hardware support personnel to
verify the data on the boxed device. Do one of the following:
- Enter a DISPLAY UNITS command to see if the device is one of the
following:
- Offline and boxed (F-BOX)
- Allocated and boxed (A-BOX)
- If the device is offline and boxed, vary the device online by
entering the following command:
VARY dev,ONLINE
- If the device is allocated and boxed, display the using job steps
that are allocated to the device by entering the following command:
DISPLAY
U,,ALLOC,dev,1
Follow your installation's
procedures for unallocating using job steps.
Vary
the device offline, using the following command:
VARY dev,OFFLINE
Vary
the device online, using the following command:
VARY dev,ONLINE
- Verify the data on the volume.
- Identify and recover failing tasks.
Source
Input/output supervisor (IOS)
Module
Routing code
Descriptor code