(B075) Workstation adapter console reference codes

The workstation adapter console detected a failure.

Look at characters 5 through 8 of the top 16 character line of function 11 (4 rightmost characters of word 1). These 4 characters are the unit reference code.
Find the unit reference code in the following table.

For more on the Failing Item column entries, see Table 2. Workstation adapter console failing items details, which follows the reference code table below.

Table 1. (B075) Workstation adapter console reference codes

Reference Code	Description/Action Perform all actions before exchanging Failing Items	Failing Item
0101	WS IOP detected error when transmitting data Perform WSCIP01.	FI00601 GXC7777 FI00631 FI00730
0103	WS IOP detected parity error from device Perform WSCIP01.	FI00601 GXC7777 FI00631 FI00730
0104	Device detected parity error from WS IOP Perform WSCIP01.	FI00601 GXC7777 FI00631 FI00730
0105	WS IOP detected error when transmitting data Perform WSCIP01.	FI00601 GXC7777 FI00631 FI00730
0106	WS IOP detected wrong data from device Perform WSCIP01.	FI00601 FI00631 GXC7777 FI00730
0107	WS IOP detected wrong address from device Perform WSCIP01.	FI00601 GXC7777 FI00730
0108	WS IOP detected device power turned off, and then on Perform WSCIP01.	GXCEEEE FI00601
0109	WS IOP detected wrong device response to start command Perform WSCIP01.	FI00601 FI00615
0111	WS IOP detected wrong keyboard scan code from display Perform WSCIP01.	FI00601 FI00730
0120	Device detected wrong command or device ID from WS IOP Perform WSCIP01.	FI00601 FI00730
0121	Device detected not valid value from WS IOP Perform WSCIP01.	FI00601 FI00730
0122	Device detected storage or data overrun Perform WSCIP01.	FI00601 FI00730
0123	Device detected null or attribute exception error Perform WSCIP01.	FI00601 FI00730
0124	Device detected wrong start command from WS IOP Perform WSCIP01.	FI00601 FI00730
0125	WS IOP detected wrong exception response from device Perform WSCIP01.	FI00601 FI00730
0126	WS IOP detected not valid pass-through command Perform WSCIP01.	GXC9999 FI00730
0149	WS IOP detected wrong request or response from device Perform WSCIP01.	FI00601 FI00730
0190	WS IOP detected no status change from device Perform WSCIP01.	FI00601 GXC7777 FI00730
0191	WS IOP detected busy time-out from device Perform WSCIP01.	FI00601 FI00730
0201	WS IOP detected error when transmitting data Perform WSCIP01.	FI00604 GXC7777 FI00631 FI00730
0203	WS IOP detected parity error from device Perform WSCIP01.	FI00604 GXC7777 FI00631 FI00730
0204	Device detected parity error from WS IOP Perform WSCIP01.	FI00604 GXC7777 FI00631 FI00730
0205	WS IOP detected error when transmitting data Perform WSCIP01.	FI00604 GXC7777 FI00631 FI00730
0206	WS IOP detected wrong data from device Perform WSCIP01.	FI00604 FI00631 FI00730
0207	WS IOP detected wrong address from device Perform WSCIP01.	FI00604 GXC7777 FI00730
0208	WS IOP detected device power turned off, and then on	GXCEEEE FI00604
0209	WS IOP detected wrong device response to start command	FI00604 FI00730
0211	Printer detected equipment error	FI00604 FI00730
0221	Device detected not valid value from WS IOP	FI00604 FI00730
0224	Device detected wrong start command from WS IOP	FI00604 FI00730
0225	WS IOP detected wrong exception response from device	FI00604 FI00730
0290	WS IOP detected no status change from device	FI00604 FI00730
0291	WS IOP detected busy time-out from device	FI00604 FI00730
5000	Wrong command sent by Licensed Internal Code	AJDG301
5001	Procedure error in Licensed Internal Code	AJDG301
5002	Procedure error in Licensed Internal Code Procedure error in machine instructions	CXCTEMP AJDG301
5006	Procedure error in Licensed Internal Code	AJDG301
5007	Procedure error in Licensed Internal Code	AJDG301 CXCMSTA
5009	Incorrect command value sent by Licensed Internal Code	AJDG301
500A	Procedure error in Licensed Internal Code	AJDG301
500D	Incorrect command value sent by Licensed Internal Code	AJDG301 CXCMAXI
5022	Procedure error in Licensed Internal Code	AJDG301
5206	Communications controller storage not available	CXCBUSY
56EA	Clear-to-send signal dropped on modem interface	GXCLINK FI00704 CXCCTSV FI00719 FI00701
56ED	Data-set-ready turn-on time-out on modem interface	FI00701 FI00704 FI00719 AJLAG01
56F1	Data-set-ready dropped on modem interface	FI00704 FI00701 GXCLINK FI00719
5710	Nonproductive receive time-out while receiving from remote	CXCNPRT FI00700 FI00705 FI00704 GXCLINK FI00701 FI00719
5712	No data received from remote equipment; time-out	AJLAG01 CXCENCD CXCINAT GXCLINK FI00704 FI00705 FI00700 CXCSTAD FI00701 CXCDTAR FI00719 CXCMRTY
5715	Remote equipment did not respond causing an idle-time-out	GXCLINK CXCRPTO FI00701 FI00704 CXCMRTY FI00705 CXCENCD FI00700 CXCDTAR FI00719
5718	Retry limit reached for sending frames to remote equipment	GXCLINK FI00705 FI00704 FI00700 CXCMRTY FI00719 FI00701
5719	Retry limit reached for sending frames to remote equipment	FI00700
5720	Retry limit reached for sending poll frame to remote	FI00700 CXCMODU
5721	Could not send frame to remote equipment; local problem	FI00704 CXCDTAR FI00701 FI00719 FI00730
5722	Wrong command value sent by OS/400 licensed program	AJLAG01 CXCSTAD
A000	Too many devices active on the workstation IOP	GXCBBBB
B000	WS IOP fails to report part, model and serial number Perform WSCIP01.	FI00615
C000, D000	WS IOP error not known	AJLAG01
D001	Wrong or no external communications cable installed	FI00631 AJLAG01
F003	WS IOA buffer utilization threshold exceeded temporarily	AJLAG01
FFFF	User believes there is a problem Reference code FFFF is assigned by the ANZPRB (Analyze Problems) for user-detected errors. Run ANZPRB again if the problem still exists or look in the problem log (WRKPRB) for possible failing FRUs.	UXCFF00

Table 2. Workstation adapter console failing items details

Failing Item	Description	Document Description
AJDG301	Vertical Licensed Internal Code	Service Functions; APAR or LICTR
AJLAG01	Licensed Internal Code	Service Functions; APAR or LICTR
CXCBUSY	Too many communications lines in use	Communications Configuration
CXCCONF	Configuration or OS/400 licensed program	Communications Configuration
CXCCPTO	CNNPOLLTMR value in CRTLINSDLC command	Communications Configuration
CXCCTSV	CTSTMR value in CRTLINSDLC command	Communications Configuration
CXCDTAR	LINESPEED value in CRTLINSDLC command	Communications Configuration
CXCENCD	NRZI value in CRTLINSDLC command	Communications Configuration
CXCINAT	INACTTMR value in CRTLINSDLC command	Communications Configuration
CXCMAXI	MAXFRAME value in CRTLINSDLC command	Communications Configuration
CXCMODU	MODULUS value in CRTLINSDLC command	Communications Configuration
CXCMRTY	FRAMERTY value in CRTLINSDLC command	Communications Configuration
CXCMSTA	MAXCTL value in CRTLINSDLC command	Communications Configuration
CXCNPRT	NPRDRCVTMR value in CRTLINSDLC command	Communications Configuration
CXCRPTO	IDLTMR value in CRTLINSDLC command	Communications Configuration
CXCSNDT	SHMNODE value in CRTLINSDLC command	Communications Configuration
CXCSTAD	STNADR value in CRTCTL_____command	Communications Configuration
CXCTEMP	No failure found	Communications Configuration
GXC7777	Electrical interference
GXC8888	Other workstation on port is failing
GXC9999	Error occurred with pass-through command
GXCBBBB	Too many devices are active on the workstation IOP
GXCEEEE	Active device turned off
GXCLINK	Communications network equipment
UXCFF00	User suspected problem

Send feedback | Rate this page