This SRC might indicate a communications error.
Find the unit reference code in the following table. For more on the Failing Item column entries, see Table 2. Failing items details, which follows the reference code table below.
Table 1. (B040) Reference codes
| Reference Code | Description/Action Perform all actions before exchanging Failing Items | Failing Item |
|---|---|---|
| 501C, 501E | Command value error in I/O card Licensed Internal Code | |
| 50E0 | Wrong or no external communications cable installed | |
| 50E1 | Communications line already in use | |
| 50E3 to 50E4 | Wrong command value sent by OS/400 licensed program | |
| 50E5 | Incorrect command value sent by Licensed Internal Code | |
| 50E6 to 50E7 | Incorrect command value sent by Licensed Internal Code | |
| 50E8 | Wrong command value sent by OS/400 licensed program | |
| 50E9, 50EB | Incorrect command value sent by Licensed Internal Code | |
| 50EC to 50ED | Wrong command value sent by OS/400 licensed program | |
| 50EE | Incorrect command value sent by Licensed Internal Code | |
| 50F1 | Communications line not installed | |
| 50F5 | Network uncontrolled-not-ready warning; information only | |
| 50F6 | Network controlled-not-ready warning; information only | |
| 50F8 | Adapter card transmit error | |
| 5203 | I/O card Licensed Internal Code resource not available | |
| 52E0 | Incorrect command used by I/O card Licensed Internal Code | |
| 52E1 | Wrong procedure used in I/O card Licensed Internal Code | |
| 52E2 | I/O card Licensed Internal Code resource not available | |
| 52E4 | Wrong command value sent by OS/400 licensed program | |
| 52E7 | X.21 network not in the ready or receive-data state | |
| 52E8 to 52E9 | Command value error in I/O card Licensed Internal Code | |
| 52EA | I/O card Licensed Internal Code error | |
| 5301 | Adapter card receive error | |
| 5302 | Adapter card transmit error | |
| 5401 | Communications adapter card interrupt not expected | |
| 54E1 | Communications line not operational | |
| 56E8 | Clear-to-send not active on modem interface | |
| 56E9 | Clear-to-send signal failed to drop on modem interface | |
| 56EA | Clear-to-send signal dropped on modem interface | |
| 56ED | Data-set-ready turn-on time-out on modem interface | |
| 56F1 | Data-set-ready dropped on modem interface | |
| A000 | Input value error in I/O card Licensed Internal Code | |
| A001 | Input value error in I/O card Licensed Internal Code | |
| A002 | Input value error in I/O card Licensed Internal Code | |
| A003 | Input value error in I/O card Licensed Internal Code | |
| A00E | Procedure error in Licensed Internal Code | |
| A016 | Input value error in I/O card Licensed Internal Code | |
| A01B to A01D | Input value error in I/O card Licensed Internal Code | |
| A02D | Input value error in I/O card Licensed Internal Code | |
| A201 | Frame Relay I/O adapter card storage not available | |
| A204 | Input value error in I/O card Licensed Internal Code | |
| A205 | I/O card Licensed Internal Code received unexpected response | |
| A209 to A20B | Input value error in I/O card Licensed Internal Code | |
| A210 | Communications adapter card error | |
| A213 | Severe error detected by I/O card Licensed Internal Code | |
| A800 | Network not responding. | |
| A801 | Too many frames with bad receive sequence counts | |
| A807 | Network not responding. | |
| AB00 to AB02 | Incorrect configuration data for Frame Relay LIC | |
| FFFF | User suspected communications problem. |
UJ4UPPR |
Table 2. Failing items details
| Failing Item | Description | Document Description |
|---|---|---|
| AJDG301 | Licensed Internal Code | See the service documentation for instructions. |
| AJDG301 | Licensed Internal Code | See the service documentation for instructions. |
| IOA | Communications adapter card | See the service documentation for instructions. |
| UJ0E3 | Communications network equipment | See the service documentation for instructions. |
| UJ4UPPR | User perceived problem | |
| UJA33 | Too many communications lines in use | Communications Management |
| UJA34 | MAXFRAME value in CRTNWIFR command | Communications Configuration |
| UJA34 | ACRSRCNAME value in CRTNWIFR command | See the service documentation for instructions. |
| UJA34 | MAXOUT value in CRTNWIFR command | Communications Configuration |
| UJA34 | AUTOANS, AUTODIAL, SWTCNN, CNN values in CRTNWIFR command | See the service documentation for instructions. |
| UJA34 | No failure found | Communications Configuration |
| UJA34 | NRZI value in CRTNWIFR command | Communications Configuration |
| UJA34 | CTSTMR value in CRTNWIFR command | See the service documentation for instructions. |
| UJA34 | RSRCNAME value in the CRTNWIFR command | Communications Configuration |
| UJA34 | SNBU, MODEMRATE, DUPLEX values in CRTNWIFR command | Communications Configuration |
| UJA34 | INTERFACE value in CRTNWIFR command | See the service documentation for instructions. |
| UJA34 | LINESPEED value in CRTNWIFR command | Communications Configuration |