This SRC might indicate a communications error.
Find the unit reference code in the following table. For more on the Failing Item column entries, see Table 2. Failing items details, which follows the reference code table below.
Table 1. (B018) Reference codes
| Reference Code | Description/Action Perform all actions before exchanging Failing Items | Failing Item |
|---|---|---|
| 6004 | ABEND due to unrecoverable condition. | |
| 6005 | IOP activation failed. | |
| 6006 | Error in OS/400 code. |
|
| 6007 | Error in OS/400 code. | |
| 6008 to 6009 | External devices or network |
|
| 600A | IOP activation failed. | |
| 8001 | ABEND due to unrecoverable condition. | |
| 8002 | IOP activation failed. | |
| 8003 | ABEND due to failure to communicate with system. |
|
| 8004 | I/O adapter hardware error detected | |
| 8005 | ABEND due to unrecoverable condition. | |
| 8006 | IOP activation failed. | |
| 8007 | Error in OS/400 code. |
|
| 8011 | IOP activation failed.
The MDMCNTRYID parameter in Network Attributes is not set. Use the CHGNETA command to set MDMCNTRYID. |
|
| 8012 | IOP activation failed.
The network type is *NISDN and there is a value for SPID but *NONE or *CNNL was specified for LCLNBR. Run CHGNWIISDN and supply a value for either the first or second local number parameter (LCLNBR) as required, then vary on the NWI again. |
|
| 8013 | IOP activation failed.
The MDMCNTRYID parameter in Network Attributes is not valid for this adapter. Use the CHGNETA command to change MDMCNTRYID . |
UCCCONF |
Table 2. Failing items details
| Failing Item | Description | Document Description |
|---|---|---|
| AJDG301 | Licensed Internal Code | See the service documentation for instructions. |
| AJDGP01 | I/O card Licensed Internal Code | See the service documentation for instructions. |
| GCCNET | Network equipment | |
| IOA | Communications adapter card | See the service documentation for instructions. |
| UCCCONF | Configuration |