This SRC might indicate a communications error.
Find the unit reference code in the following table. For more on the Failing Item column entries, see Table 2. Failing items details, which follows the reference code table below.
Table 1. (B009) Reference codes
| Reference Code | Description/Action Perform all actions before exchanging Failing Items | Failing Item |
|---|---|---|
| A000 | Input value error in I/O card Licensed Internal Code | |
| A001 | Input value error in I/O card Licensed Internal Code | |
| A002 | Input value error in I/O card Licensed Internal Code | |
| A003 | Procedure error in I/O card Licensed Internal Code | |
| A009 to A00A | Input value error in I/O card Licensed Internal Code | |
| A013 | Wrong configuration data given to Ethernet controller | |
| A01B to A01D | Input value error in I/O card Licensed Internal Code | |
| A01F | Input value error in I/O card Licensed Internal Code | |
| A020 | Input value error in I/O card Licensed Internal Code | |
| A022 to A024 | Input value error in I/O card Licensed Internal Code | |
| A027 | Input value error in I/O card Licensed Internal Code | |
| A028 | Input value error in I/O card Licensed Internal Code | |
| A02A | Input value error in I/O card Licensed Internal Code | |
| A02B to A02D | Input value error in I/O card Licensed Internal Code | |
| A201 | Ethernet controller storage not available | |
| A203 to A204 | Input value error in I/O card Licensed Internal Code | |
| A205 | Licensed Internal Code received not correct response | |
| A206, A208 to A20B | Input value error in I/O card Licensed Internal Code | |
| A20C | Input value error in I/O card Licensed Internal Code | |
| A213 to A214 | Serious error detected by I/O card Licensed Internal Code | |
| A404 | Ethernet adapter card error | |
| A40B | Ethernet adapter card error | |
| A42A | User suspected communications problem.
Full DUPLEX is not supported on this media type. |
|
| A42B | Configuration of DUPLEX parameter not supported by network. | |
| A6C0 | Ethernet adapter card error | |
| A6C1 | Input value error in I/O card Licensed Internal Code | |
| A6C2, A6C5 | Ethernet adapter card error | |
| A6D1 | Ethernet adapter card error | |
| A6D2 | Ethernet adapter card error | |
| A6D3 | Ethernet adapter card error
Verify that the signal quality error switch in the transceiver that the Ethernet is attached to is set to active. |
|
| A6D4 | Procedure error in I/O card Licensed Internal Code | |
| A6D5 to A6D8 | Wrong configuration data given to Ethernet controller | |
| A6D9 | Ethernet adapter card error | |
| A6E1 | Ethernet adapter card error | |
| A6E2 | Ethernet adapter card error | |
| A6E3 | Ethernet transceiver error | |
| A6E6 | Ethernet transceiver error | |
| A6E7 to A6E8 | Ethernet adapter card error | |
| A6E9 | Ethernet adapter card error | |
| A6F1 | User suspected communications problem.
There are two cables attached to the adapter and only one is allowed. Remove one cable and vary off and then vary back on the resource. |
|
| A6F2 | Configured line speed not supported by network. | |
| A6F3 | Configuration of DUPLEX parameter not supported by network. | |
| A6F4 | Unable to establish a network link. | |
| A801, A805 | Input value error in I/O card Licensed Internal Code | |
| A806 | Input value error in I/O card Licensed Internal Code | |
| A808 | Input value error in I/O card Licensed Internal Code | |
| A809 to A80A | Input value error in I/O card Licensed Internal Code | |
| A80B | Input value error in I/O card Licensed Internal Code | |
| A80C to A80F | Input value error in I/O card Licensed Internal Code | |
| A810 | Procedure error in Licensed Internal Code | |
| A811 to A812, A815 | Procedure error in Licensed Internal Code | |
| A816 to A817 | Input value error in I/O card Licensed Internal Code | |
| A818 | Output value error in Licensed Internal Code | |
| A819 | Input value error in I/O card Licensed Internal Code | |
| A81A | Procedure error in Licensed Internal Code | |
| A81B | Procedure error in Licensed Internal Code | |
| A81C | Output value error in Licensed Internal Code | |
| A81E | Output value error in Licensed Internal Code | |
| A81F | Procedure error in Licensed Internal Code | |
| A822, A824 | Input value error in I/O card Licensed Internal Code | |
| A826 to A827 | Procedure error in Licensed Internal Code | |
| A829 | Output value error in Licensed Internal Code | |
| A82A | Procedure error in Licensed Internal Code | |
| A82D, A82F | Output value error in Licensed Internal Code | |
| A830 | Procedure error in I/O card Licensed Internal Code | |
| A831 | Procedure error in Licensed Internal Code | |
| A832 | Output value error in Licensed Internal Code | |
| A833 | Output value error in Licensed Internal Code | |
| A834 | Output value error in Licensed Internal Code | |
| A836 | Procedure error in Licensed Internal Code | |
| A838 | Procedure error in Licensed Internal Code | |
| A839, A83B, A840, A842 | Procedure error in Licensed Internal Code | |
| A844, AA06 to AA07 | Output value error in Licensed Internal Code | |
| AA11 | Number of stations greater than allowed in configuration | |
| AA12 | Not enough storage to process adapter command | |
| AA15 | Procedure error in I/O card Licensed Internal Code | |
| ACD0 to ACD1, ACD4 to ACD8 | Input value error in I/O card Licensed Internal Code | |
| AF0A to AF0B | Procedure error in Licensed Internal Code | |
| FFFF | User suspected communications problem. |
Table 2. Failing items details
| Failing Item | Description | Document Description |
|---|---|---|
| AJDG301 | Licensed Internal Code | See the service documentation for instructions. |
| IOA | Ethernet network adapter card | Repair and Parts; removal and installation procedures |
| UJE35 | DUPLEX value in CRTLINETH command | Communications Configuration |
| UJE35 | SSAP value in CRTLINETH command | Communications Configuration |
| UJE35 | LINESPEED value in CRTLINETH command | Communications Configuration |
| UJE35 | MAXCTL value in CRTLINETH command | Communications Configuration |
| UJE36 | LANACKFRQ value in CRTCTL_____command | Communications Configuration |
| UJE36 | DSAP value in CRTCTL_____command | Communications Configuration |
| UJE39 | Remote computer equipment | Communications Configuration |
| UJE40 | Network Termination, Network or Network devices | |
| USER | User suspected communications problem. |