Removing and replacing the rear USB cable for the 8247-42L, 8286-41A, or 8286-42A

Learn how to remove and replace the rear USB cable to replace a failing part, or as part of another service action.

If your system is managed by the Hardware Management Console (HMC), use the HMC to repair a part in the system. For instructions, see Repairing a part by using the HMC.

If your system is not managed by an HMC, complete the following steps to remove and replace the rear USB cable:

  1. Preparing the system to remove and replace the rear USB cable
    Learn how to prepare the system to remove and replace the rear USB cable.
  2. Removing the rear USB cable from the 8247-42L, 8286-41A, or 8286-42A
    Learn how to remove the rear USB cable from the server.
  3. Replacing the rear USB cable in the 8247-42L, 8286-41A, or 8286-42A
    Learn how to replace the rear USB cable that is part of a service action.
  4. Preparing the system for operation after removing and replacing the rear USB cable
    Use this procedure to prepare the system for operation after removing and replacing the rear USB cable.
Parent topic: Rear USB cable for the 8247-42L, 8286-41A, or 8286-42A


Last updated: Wed, May 31, 2017