//BBO85SMP JOB JOB JOB00301 //* //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2022 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Updated: October 7, 2022 * //* _________________________________________________________________ * //* * //* This job loads a set of sample jobs for installing WebSphere * //* Application Server V8.5 components on z/OS. * //* * //* Update the JOB statement and SYSUT2 data set name as appropriate * //* for your enterprise. * //* * //* These jobs are intended for use with Installation Manager 1.9.0 * //* or above. * //* * //* Change log: * //* 02/14/2022 Increased space allocations for Liberty runtime * //* 02/14/2022 Added information about Java end-of-support dates * //* 08/21/2022 Added jobs for Java 11 install on Liberty * //* 10/07/2022 Added remote install jobs for Java 11 on Liberty * //* * //********************************************************************* //* //IEBUPDTE EXEC PGM=IEBUPDTE,PARM=NEW //SYSPRINT DD SYSOUT=* //SYSUT2 DD DISP=(NEW,CATLG),DSN=BBO.WAS85.SAMPJOBS, // SPACE=(TRK,(15,5,20)), // RECFM=FB,LRECL=80,BLKSIZE=0 //SYSIN DD DATA,DLM='$$' ./ ADD NAME=BBO$INDX Index of WAS 8.5 sample jobs "Portable" refers to a product installation in which the Installation Manager metata ("appdata") and cache are stored together with one or more products in a single filesystem. Also, note that his library contains two sets of jobs for installing the Java 8 SDK onto WebSphere Liberty. The BBO9* jobs are used with com.ibm.websphere.IBMJAVA.v80, which will no longer be maintained or upgraded as of March 2021. We recommend that customers uninstall this SDK and instead use the BJA4* jobs to install com.ibm.java.sdk.v8, which will remain fully supported after March 2021, BBO1CRED Create credentials for the web-based repository BBO1CFS Allocate a filesystem for the WAS 8.5 product BBO1CFSP Allocate a filesystem for the WAS 8.5 product (portable) BBO1INS Install WAS 8.5 from the web-based repository BBO1INSL Install WAS 8.5 from a local repository BBO1INST Install WAS 8.5 from the SMP/E-managed repository BBO1INSP Install WAS 8.5 from the web-based repository (portable) BBO1INSQ Install WAS 8.5 from a local repository (portable) BBO1UNIN Uninstall WAS 8.5 BBO1UNIP Uninstall WAS 8.5 (portable install) BBO2CFS Allocate a filesystem for the NDDMZ Secure Proxy Server BBO2CFSP Allocate a filesystem for the NDDMZ SPS (portable) BBO2INS Install NDDMZ SPS from the web-based repository BBO2INSL Install NDDMZ SPS from a local repository BBO2INST Install NDDMZ SPS from the SMP/E-managed repository BBO2INSP Install NDDMZ SPS from the web-based repo (portable) BBO2INSQ Install NDDMZ SPS from a local repository (portable) BBO2UNIN Uninstall the NDDMZ Secure Proxy Server BBO2UNIP Uninstall the NDDMZ Secure Proxy Server (portable) BBO3CFS Allocate a filesystem for the WAS Plugins BBO3CFSP Allocate a filesystem for the WAS Plugins (portable) BBO3INS Install the WAS Plugins from the web-based repository BBO3INSL Install the WAS Plugins from a local repository BBO3INST Install the WAS Plugins from the SMP/E-managed repository BBO3INSP Install the WAS Plugins from the web-based repo (port.) BBO3INSQ Install the WAS Plugins from a local repository (port.) BBO3UNIN Uninstall the WAS Plugins BBO3UNIP Uninstall the WAS Plugins (portable install) BBO4CFS Allocate a filesystem for the IHS 8.5 product BBO4CFSP Allocate a filesystem for the IHS 8.5 product (portable) BBO4INS Install IHS 8.5 from the web-based repository BBO4INSL Install IHS 8.5 from a local repository BBO4INST Install IHS 8.5 from the SMP/E-managed repository BBO4INSP Install IHS 8.5 from the web-based repository (portable) BBO4INSQ Install IHS 8.5 from a local repository (portable) BBO4UNIN Uninstall IHS 8.5 BBO4UNIP Uninstall IHS 8.5 (portable install) BBO5CFS Allocate a filesystem for the Liberty product BBO5CFSP Allocate a filesystem for the Liberty product (portable) BBO5INS Install Liberty from the web-based repository BBO5INSL Install Liberty from a local repository BBO5INST Install Liberty from the SMP/E-managed repository BBO5INSP Install Liberty from the web-based repository (portable) BBO5INSQ Install Liberty from a local repository (portable) BBO5UNIN Uninstall Liberty BBO5UNIP Uninstall Liberty (portable install) BJA1INS Install Java 7.0 onto WAS or NDDMZ SPS (web-based) BJA1INSL Install Java 7.0 onto WAS or NDDMZ SPS (local) BJA1INST Install Java 7.0 onto WAS or NDDMZ SPS (SMP/E) BJA1INSP Install Java 7.0 onto WAS or SPS (web-based, portable) BJA1INSQ Install Java 7.0 onto WAS or SPS (local, portable) BJA1UNIN Uninstall Java 7.0 from WAS or NDDMZ SPS BJA1UNIP Uninstall Java 7.0 from WAS or SPS (portable install) BJA3INS Install Java 7.0 onto Liberty (web-based) BJA3INSL Install Java 7.0 onto Liberty (local) BJA3INST Install Java 7.0 onto Liberty (SMP/E) BJA3UNIN Uninstall Java 7.0 from WAS or NDDMZ SPS BBO6INS Install Java 7.1 onto WAS or NDDMZ SPS (web-based) BBO6INSL Install Java 7.1 onto WAS or NDDMZ SPS (local) BBO6INSP Install Java 7.1 onto WAS or SPS (web-based, portable) BBO6INSQ Install Java 7.1 onto WAS or SPS (local, portable) BBO6UNIN Uninstall Java 7.1 from WAS or NDDMZ SPS BBO6UNIP Uninstall Java 7.1 from WAS or SPS (portable install) BBO7INS Install Java 7.1 onto Liberty (web-based) BBO7INSL Install Java 7.1 onto Liberty (local) BBO7UNIN Uninstall Java 7.1 from Liberty BBO8INS Install Java 8.0 onto WAS or NDDMZ SPS (web-based) BBO8INSL Install Java 8.0 onto WAS or NDDMZ SPS (local) BBO8INSP Install Java 8.0 onto WAS or SPS (web-based, portable) BBO8INSQ Install Java 8.0 onto WAS or SPS (local, portable) BBO8UNIN Uninstall Java 8.0 from WAS or NDDMZ SPS BBO8UNIP Uninstall Java 8.0 from WAS or SPS (portable install) BBO9INS Install Java 8.0 onto Liberty (web-based) BBO9INSL Install Java 8.0 onto Liberty (local) BBO9INSP Install Java 8.0 onto Liberty (web-based, portable) BBO9INSQ Install Java 8.0 onto Liberty (local, portable) BBO9UNIN Uninstall Java 8.0 from Liberty BBO9UNIP Uninstall Java 8.0 from Liberty (portable install) BJA4INS Install Java 8.0 onto Liberty (web-based) BJA4INSL Install Java 8.0 onto Liberty (local) BJA4INSP Install Java 8.0 onto Liberty (web-based, portable) BJA4INSQ Install Java 8.0 onto Liberty (local, portable) BJA4UNIN Uninstall Java 8.0 from Liberty BJA4UNIP Uninstall Java 8.0 from Liberty (portable install) BJA5INS Install Java 11.0 onto Liberty (web-based) BJA5INSL Install Java 11.0 onto Liberty (local) BJA5INSP Install Java 11.0 onto Liberty (web-based, portable) BJA5INSQ Install Java 11.0 onto Liberty (local, portable) BJA5UNIN Uninstall Java 11.0 from Liberty BJA5UNIP Uninstall Java 11.0 from Liberty (portable install) BBOIFIX Apply an iFix from the web-based repository BBOIFIXL Apply an iFix from a local repository BBOIFIXP Apply an iFix from the web-based repository (portable) BBOIFIXQ Apply an iFix from a local repository (portable) ./ ADD NAME=BBOIFIX //BBOIFIX JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs an interim fix with IBM Installation Manager * //* from the web-based service repository. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 2. Identify the name of the interim fix to be installed, and * //* the installation directory of the product to which it is * //* to be installed. Mount the product filesystem read/write * //* at this location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change $IFIX_NAME to the full name of the interim fix to be * //* installed (for example, 9.0.0.0-WS-WAS-IFPM88937). * //* * //* 4) Change $INSTALL_DIRECTORY to the installation directory of * //* the product onto which the interim fix is being installed. * //* Make sure the product filesystem is mounted (read/write) * //* at this location. * //* * //* 5) Change $PACKAGE_NAME to the name of the package onto which * //* the interim fix is being installed (for example, * //* com.ibm.websphere.zOS.v85). This will allow the appropriate * //* repository to be accessed. * //* * //* 6) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the six lines beginning with '-preferences'. * //* * //* 7) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED or BBO1CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 8) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install an interim fix. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install $IFIX_NAME + -installationDirectory + $INSTALL_DIRECTORY + -repositories http://www.ibm.com/software/repositorymanager/+ $PACKAGE_NAME + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw /* ./ ADD NAME=BBOIFIXL //BBOIFIXL JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs an interim fix with IBM Installation Manager * //* from a local repository (generally a downloaded .zip file). * //* * //* Before running this job: * //* * //* 1. Identify the name and location of the interim fix to be * //* installed. Generally this will be a .zip file obtained * //* from Fix Central or IBM Support. Make sure the file can * //* be read by the Installation Manager user ID. * //* * //* 2. Identify the installation directory of the product to which * //* this fix is to be applied. Mount the product filesystem * //* (read/write) at this location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change $IFIX_NAME to the full name of the interim fix to be * //* installed (for example, 8.5.5.0-WS-WAS-IFPM88937). * //* * //* 4) Change $INSTALL_DIRECTORY to the installation directory of * //* the product onto which the interim fix is being installed. * //* Make sure the product filesystem is mounted (read/write) * //* at this location. * //* * //* 5) Change $IFIX_FILENAME.zip to the filename of the file which * //* contains the interim fix. The filename will usually be the * //* same as the interim file, with a '.zip' extension. If the * //* file is not in /global/instmgr/repo, change the path as well. * //* If the interim fix has been uncompressed, specify the * //* directory into which it has been uncompressed. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install an interim fix. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install $IFIX_NAME + -installationDirectory + $INSTALL_DIRECTORY + -repositories + /global/instmgr/repo/$IFIX_FILENAME.zip /* ./ ADD NAME=BBOIFIXP //BBOIFIXP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs an interim fix with IBM Installation Manager * //* from the web-based service repository. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 2. Identify the name of the interim fix to be installed, and * //* the installation directory of the product to which it is * //* to be installed. Mount the product filesystem read/write * //* at this location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $IFIX_NAME to the full name of the interim fix to be * //* installed (for example, 8.5.5.0-WS-WAS-IFPM88937). * //* * //* 4) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the installed product(s) * //* and their Installation Manager metadata and logs. * //* * //* 5) Change $PRODUCT to the product identifier which identifies * //* the spcific product in the portable install to which the * //* interim fix is to be applied. * //* * //* 6) Change $PACKAGE_NAME to the name of the package onto which * //* the interim fix is being installed (for example, * //* com.ibm.websphere.zOS.v85). This will allow the appropriate * //* repository to be accessed. * //* * //* 7) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the six lines beginning with '-preferences'. * //* * //* 8) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED or BBO1CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install an interim fix. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install $IFIX_NAME + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/$PRODUCT + -repositories http://www.ibm.com/software/repositorymanager/+ $PACKAGE_NAME + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -accessRights group /* ./ ADD NAME=BBOIFIXQ //BBOIFIXQ JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs an interim fix with IBM Installation Manager * //* from a local repository (generally a downloaded .zip file). * //* * //* Before running this job: * //* * //* 1. Identify the name and location of the interim fix to be * //* installed. Generally this will be a .zip file obtained * //* from Fix Central or IBM Support. Copy the file into the * //* /global/instmgr/repo directory and make sure it is * //* readable by the user ID that will apply the fix. * //* * //* 2. Identify the installation directory of the product to which * //* this fix is to be applied. Mount the product filesystem * //* (read/write) at this location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $IFIX_NAME to the full name of the interim fix to be * //* installed (for example, 8.5.5.0-WS-WAS-IFPM88937). * //* * //* 4) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the installed product(s) * //* and their Installation Manager metadata and logs. * //* * //* 5) Change $PRODUCT to the product identifier which identifies * //* the spcific product in the portable install to which the * //* interim fix is to be applied. * //* * //* 6) Change $IFIX_FILENAME.zip to the filename of the file which * //* contains the interim fix. The filename will usually be the * //* same as the interim file, with a '.zip' extension. If the * //* file is not in /global/instmgr/repo, change the path as well. * //* If the interim fix has been uncompressed, specify the * //* directory into which it has been uncompressed. * //* * //* 7) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install an interim fix. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install $IFIX_NAME + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/$PRODUCT + -repositories + /global/instmgr/repo/$IFIX_FILENAME.zip + -accessRights group /* ./ ADD NAME=BBO1CFS //BBO1CFS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job allocates and mounts a new HFS or zFS filesystem for * //* the WebSphere Application Server V8.5 full profile product. * //* * //* Ensure you execute this job from a userid that is UID=0 * //* or is permitted to the 'BPX.SUPERUSER' facility class. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) To use a different data set name for the product file system, * //* change 'BBO.V8R5.SBBOZFS' to the desired value. * //* * //* 4) To create an HFS filesystem instead of a zFS filesystem, * //* change "-type ZFS" to "-type HFS". * //* * //* 5) Set the -volume, -storclas, -dataclas, and -mgmtclas to the * //* appropriate volume and SMS storage, data, and management * //* classes for the new filesystem. Delete any allocation * //* parameters which are not needed on your system. * //* * //* 6) Change $LEVEL to indicate the level you are installing (e.g. * //* 8.5.5.13) or some other identifier for this copy of the * //* product. You may want to add this same value (in some form) * //* to the filesystem data set name (-name) above. * //* * //* The filesystem must always be mounted (read/write) at this * //* path when it is being updated with Installation Manager. * //* It should be remounted (read-only) at another location for * //* actual product use. * //* * //* 7) Change IMADMIN and IMGROUP to the SAF user ID and group that * //* will "own" this package group's files. This will usually be * //* the same user ID and group that own the Installation Manager * //* instance to which the package group belongs. * //* * //* 8) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* The mountpoint directory, and any required directories above it, * //* will be created. Initial permissions for these directories are * //* set to 755. To alter this initial setting, specify -perm on * //* the zCreateFileSystem.sh call, followed by the desired initial * //* permissions. * //* * //********************************************************************* //* //**************************************************************** //* The following step allocates a new filesystem for the * //* WebSphere Application Server V8.5 full profile product. * //**************************************************************** //CREATE EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/zCreateFileSystem.sh + -name BBO.V8R5.SBBOZFS + -type ZFS + -volume hhhhhh + -storclas ssssssss + -dataclas dddddddd + -mgmtclas mmmmmmmm + -cylinders 3200 200 + -mountpoint + /global/instmgr/products/WebSphere/AppServer/$LEVEL + -owner IMADMIN + -group IMGROUP /* ./ ADD NAME=BBO1CFSP //BBO1CFSP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job allocates and mounts a new HFS or zFS filesystem for * //* the WebSphere Application Server V8.5 full profile product. * //* * //* Ensure you execute this job from a userid that is UID=0 * //* or is permitted to the 'BPX.SUPERUSER' facility class. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) To use a different data set name for the product file system, * //* change 'BBO.V8R5.SBBOZFS' to the desired value. * //* * //* 4) To create an HFS filesystem instead of a zFS filesystem, * //* change "-type ZFS" to "-type HFS". * //* * //* 5) Set the -volume, -storclas, -dataclas, and -mgmtclas to the * //* appropriate volume and SMS storage, data, and management * //* classes for the new filesystem. Delete any allocation * //* parameters which are not needed on your system. * //* * //* 6) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which will contain the installed * //* products(s) and their Installation Manager metadata and logs. * //* You may want to include some form of the $INSTALL value in * //* the filesystem dataset name. The filesystem must be mounted * //* at this location whenever the product(s) are serviced with * //* Installation Manager. * //* * //* 7) If optional Java Software Development Kits or additional * //* products (such as IBM HTTP Server) will be added to the * //* portable install, increase the space allocation (-cylinders) + //* accordingly. * //* * //* 8) Change IMADMIN and IMGROUP to the SAF user ID and group that * //* will "own" this package group's files. This will usually be * //* the same user ID and group that own the Installation Manager * //* instance to which the package group belongs. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* The mountpoint directory, and any required directories above it, * //* will be created. Initial permissions for these directories are * //* set to 755. To alter this initial setting, specify -perm on * //* the zCreateFileSystem.sh call, followed by the desired initial * //* permissions. * //* * //********************************************************************* //* //**************************************************************** //* The following step allocates a new filesystem for the * //* WebSphere Application Server V8.5 full profile product. * //**************************************************************** //CREATE EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/zCreateFileSystem.sh + -name BBO.V8R5.SBBOZFS + -type ZFS + -volume hhhhhh + -storclas ssssssss + -dataclas dddddddd + -mgmtclas mmmmmmmm + -cylinders 5100 200 + -mountpoint + /global/instmgr/$INSTALL + -owner IMADMIN + -group IMGROUP /* ./ ADD NAME=BBO1CRED //BBO1CRED JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job creates a credentials file to access Web-based product * //* and service repositories for WebSphere Application Server for * //* z/OS and its optional features. * //* * //* Before running this job, create an Installation Manager user ID * //* and group (Installation Manager sample job GIN2ADMN), * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See InstallationManager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) If you do not already have an IBM user ID, obtain one by * //* pointing a Web browser to: * //* * //* http://www.ibm.com/account/profile * //* * //* In the steps below, change "IBM_userid" to your IBM user ID, * //* and change "IBM_password" to the corresponding password. * //* * //* Associating this user ID to an entitled IBM customer number * //* will also allow you install the base product from the online * //* repository. For more information about this process, see: * //* * //* http://www.ibm.com/support/docview.wss?uid=swg21659636 * //* * //* 4) Create a Unix System Sevices file to be used as an encryption * //* key, and place one or more lines of text in the file. We * //* recommend that you create this file in the home directory of * //* the user ID that will invoke the Installation Manager. The * //* file should only be accessible to the owner (or, if the * //* file will be shared among the users in group, to those in * //* the same group). For admin and user mode Installation * //* Managers, set the file permissions to 700: * //* * //* chmod 700 $HOME/im.mpw * //* * //* For group mode Installation Managers, set the permissions to * //* 750 and make sure the file is owned by the Installation * //* manager user and group (see sample job GIN2ADM): * //* * //* chmod 750 $HOME/im.mpw * //* chown IMADMIN:IMGROUP $HOME/im.mpw * //* * //* We recommend that you ceate the secure storage file in the * //* home directory as well. If you choose a different location, * //* set -secureStorageFile to your desired path and file name. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change proxy.hostname and proxy_port to the host name and * //* port for the proxy server, and change proxy_username and * //* proxy_password to the user name and password for proxy * //* server authentication. The proxy server credentials will * //* be saved in the same file with your repository credentials. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the four lines beginning with "-proxy". * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* credentials were accepted, and saved in the credentials file(s). * //* * //* To access an IBM online product repository, specify the path and * //* file name of the secure storage file and master password file in * //* of the secure storage file and master password file in your * //* your Installation Manager commands: * //* * //* -secureStorageFile $HOME/im.ssf * //* -masterPasswordFile $HOME/im.mpw * //* * //********************************************************************* //* //**************************************************************** //* The following step creates a credentials file for use with * //* IBM Installation Manager and the Web-based product and * //* service repository. * //**************************************************************** //SAVECR EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imutilsc saveCredential + -userName IBM_userid + -userPassword IBM_password + -proxyHost proxy.hostname + -proxyPort proxy_port + -proxyUserName proxy_username + -proxyUserPassword proxy_password + -url http://www.ibm.com/software/repositorymanager/entitled + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw /* ./ ADD NAME=BBO1INS //BBO1INS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5 full * //* profile from the web-based product and service repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Create an Installation Manager if you have not already * //* done so. You will need to know the path to the binaries * //* directory for the Installation Manager. * //* * //* 2. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 3. Edit and submit sample job BBO1CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) If you specify only the package name, the product will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the product to be installed. For example: * //* * //* install com.ibm.websphere.zOS.v85_8.5.5017.20200205_1540 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* You can also specify a list of optional features: * //* * //* install package.id,feature,feature,... * //* * //* The optional features are described in the product Knowledge * //* Center. * //* * //* 4) Change '/global/instmgr/products/WebSphere/AppServer/$LEVEL' * //* to the path at which the product will be installed. (This * //* should match the path specified in BBO1CFS.) * //* * //* 5) Change '/global/instmgr/sharedResources' to the path for * //* the Installation Manager shared resources directory, if you * //* have chosen a different location. This value is set once * //* per Installation Manager, when the first product install is * //* performed, and cannot be changed by a later install. * //* * //* 6) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 7) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 8) This job will install all recommended interim fixes (iFixes) * //* from the web-based service repository. Change 'recommended' * //* to 'none' if you do not want iFixes to be installed. * //* * //* 9) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 10) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5 full profile * //* from the web-based product and service repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.zOS.v85 + -installationDirectory + /global/instmgr/products/WebSphere/AppServer/$LEVEL + -sharedResourcesDirectory + /global/instmgr/sharedResources + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.zOS.v85 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -installFixes recommended + -acceptLicense /* ./ ADD NAME=BBO1INSL //BBO1INSL JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5 full * //* profile from a local repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Create an Installation Manager if you have not already * //* done so. You will need to know the path to the binaries * //* directory for the Installation Manager. * //* * //* 2. Obtain the following base product repository file from the * //* product media, or directly from ShopzSeries: * //* * //* was.repo.8550.zOS.zip (approximately 1200 MB) * //* * //* Physical media: The file is on the z/OS Compressed * //* Repositories DVD. Transfer it in binary to your z/OS * //* system. * //* * //* ShopzSeries: Go to the Download page for your order and * //* select Additional Publications (either Download Director * //* or HTTPS). The repository you need is named cd777010.zip. * //* Download it, rename it to was.repo.8550.zOS.zip, and * //* transfer it in binary to your z/OS system. * //* * //* We recommend that you create a repo subdirectory in your * //* Installation Manager file system for repository zip files. * //* Since these files are large, you may want to create a * //* separate file system for them. You can use the Installation * //* Manager sample job GIN2REPO to create and mount this file * //* system. * //* * //* 3. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 8.5.5-WS-WAS-OS390-FPnnn.zip (approximately 2000 MB) * //* * //* Keep this file in the same location as the base product * //* repository file. Make sure both files can be read by the * //* Installation Manager user ID. * //* * //* If the fix pack consists of several zip files (part1.zip, * //* part2.zip, and so on), then use an unzip tool or jar -xvf * //* to uncompress the fix pack zip files into a single empty * //* directory, and change the pointer to the fix pack zip file * //* (in -repositories, below) to point to the fix pack * //* directory instead. * //* * //* 4. Edit and submit sample job BBO1CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) You can also specify a list of optional features: * //* * //* install package.id,feature,feature,... * //* * //* The optional features are described in the product Knowledge * //* Center. * //* * //* 4) Change '/global/instmgr/products/WebSphere/AppServer/$LEVEL' * //* to the path at which the product will be installed. (This * //* should match the path specified in BBO1CFS.) * //* * //* 5) Change '/global/instmgr/sharedResources' to the path for * //* the Installation Manager shared resources directory, if you * //* have chosen a different location. This value is set once * //* per Installation Manager, when the first product install is * //* performed, and cannot be changed by a later install. * //* * //* 6) Change '/global/instmgr/repo' to the directory that * //* contains the product repositories. Make sure all file * //* can be read by your Installation Manager user ID. * //* * //* Change the file names of the fix pack repository files to * //* match the ones you downloaded from Fix Central. * //* * //* 7) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 8) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5 full profile * //* from local product and fix pack repositories. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.zOS.v85 + -installationDirectory + /global/instmgr/products/WebSphere/AppServer/$LEVEL + -sharedResourcesDirectory + /global/instmgr/sharedResources + -repositories + /global/instmgr/repo/was.repo.8550.zOS.zip,+ /global/instmgr/repo/8.5.5-WS-WAS-OS390-FPnnn.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -acceptLicense /* ./ ADD NAME=BBO1INSP //BBO1INSP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5 full * //* profile from the web-based product and service repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 2. Edit and submit sample job BBO1CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) If you specify only the package name, the product will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the product to be installed. * //* * //* install com.ibm.websphere.zOS.v85_8.5.5017.20200205_1540 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* You can also specify a list of optional features: * //* * //* install package.id,feature,feature,... * //* * //* The optional features are described in the product Knowledge * //* Center. * //* * //* 4) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which will contain the installed product * //* and its Installation Manager metata and logs. (This value * //* should match the value specified in BBO1CFS.) * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will install all recommended interim fixes (iFixes) * //* from the web-based service repository. Change 'recommended' * //* to 'none' if you do not want iFixes to be installed. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5 full profile * //* from the web-based product and service repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.zOS.v85 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/was + -sharedResourcesDirectory + /global/instmgr/$INSTALL/.im/sharedResources + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.zOS.v85 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -accessRights group + -installFixes recommended + -acceptLicense /* ./ ADD NAME=BBO1INSQ //BBO1INSQ JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5 full * //* profile from a local repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Obtain the following base product repository file from the * //* product media, or directly from ShopzSeries: * //* * //* was.repo.8550.zOS.zip (approximately 1200 MB) * //* * //* Physical media: The file is on the z/OS Compressed * //* Repositories DVD. Transfer it in binary to your z/OS * //* system. * //* * //* ShopzSeries: Go to the Download page for your order and * //* select Additional Publications (either Download Director * //* or HTTPS). The repository you need is named cd777010.zip. * //* Download it, rename it to was.repo.8550.zOS.zip, and * //* transfer it in binary to your z/OS system. * //* * //* We recommend that you create a repo subdirectory in your * //* Installation Manager file system for repository zip files. * //* Since these files are large, you may want to create a * //* separate file system for them. You can use the Installation * //* Manager sample job GIN2REPO to create and mount this file * //* system. * //* * //* 2. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 8.5.5-WS-WAS-OS390-FPnnn.zip (approximately 2000 MB) * //* * //* Keep this file in the same location as the base product * //* repository file. Make sure both files can be read by the * //* Installation Manager user ID. * //* * //* If the fix pack consists of several zip files (part1.zip, * //* part2.zip, and so on), then use an unzip tool or jar -xvf * //* to uncompress the fix pack zip files into a single empty * //* directory, and change the pointer to the fix pack zip file * //* (in -repositories, below) to point to the fix pack * //* directory instead. * //* * //* 3. Edit and submit sample job BBO1CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) You can also specify a list of optional features: * //* * //* install package.id,feature,feature,... * //* * //* The optional features are described in the product Knowledge * //* Center. * //* * //* 4) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which will contain the installed product * //* and its Installation Manager metata and logs. (This value * //* should match the value specified in BBO1CFS.) * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 5) Change '/global/instmgr/repo' to the directory that * //* contains the product repositories. Make sure all file * //* can be read by your Installation Manager user ID. * //* * //* Change the file names of the fix pack repository files to * //* match the ones you downloaded from Fix Central. * //* * //* 6) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 7) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5 full profile * //* from local product and fix pack repositories. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.zOS.v85 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/was + -sharedResourcesDirectory + /global/instmgr/$INSTALL/.im/sharedResources + -repositories + /global/instmgr/repo/was.repo.8550.zOS.zip,+ /global/instmgr/repo/8.5.5-WS-WAS-OS390-FPnnn.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -accessRights group + -acceptLicense /* ./ ADD NAME=BBO1INST //BBO1INST JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5 full * //* profile from the SMP/E-maintained product repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Create an Installation Manager if you have not already * //* done so. You will need to know the path to the binaries * //* directory for the Installation Manager. * //* * //* 2. Mount the SMP/E-managed product repository (BBO.SBBOIMR) * //* at /usr/lpp/InstallationManagerRepository/HBBO850. * //* This filesystem should be mounted read-only. * //* * //* 3. Edit and submit sample job BBO1CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) You can also specify a list of optional features: * //* * //* install package.id,feature,feature,... * //* * //* The optional features are described in the product Knowledge * //* Center. * //* * //* 4) Change '/global/instmgr/products/WebSphere/AppServer/$LEVEL' * //* to the path at which the product will be installed. (This * //* should match the path specified in BBO1CFS.) * //* * //* 5) Change '/global/instmgr/sharedResources' to the path for * //* the Installation Manager shared resources directory, if you * //* have chosen a different location. This value is set once * //* per Installation Manager, when the first product install is * //* performed, and cannot be changed by a later install. * //* * //* 6) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 7) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5 full profile * //* from the SMP/E-managed product and service repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.zOS.v85 + -installationDirectory + /global/instmgr/products/WebSphere/AppServer/$LEVEL + -sharedResourcesDirectory + /global/instmgr/sharedResources + -repositories /usr/lpp/InstallationManagerRepository/HBBO850 + -preferences com.ibm.cic.common.core.preferences.preserveDownlo+ adedArtifacts=false + -acceptLicense /* ./ ADD NAME=BBO1UNIN //BBO1UNIN JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job uninstalls the WebSphere Application Server V8.5 full * //* profile with IBM Installation Manager. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server V8.5 * //* full profile product you wish to uninstall and mount its * //* filesystem (read/write) at the original install location. * //* * //* 2. Uninstall any optional Java Software Development Kits * //* which are installed on this copy of the WebSphere * //* Application Server product. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/AppServer/$LEVEL' * //* to the installation directory of the copy of the product to * //* be uninstalled. The product filesystem must be mounted * //* (read/write) at this location. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //* Log and properties files may be left behind even if the * //* uninstall is successful. Delete these files before reusing * //* the filesystem for a new product install. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the WebSphere Application Server V8.5 base * //* product * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + uninstall com.ibm.websphere.zOS.v85 + -installationDirectory + /global/instmgr/products/WebSphere/AppServer/$LEVEL /* ./ ADD NAME=BBO1UNIP //BBO1UNIP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job uninstalls the WebSphere Application Server V8.5 full * //* profile with IBM Installation Manager. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server V8.5 * //* full profile product you wish to uninstall and mount its * //* filesystem (read/write) at the original install location. * //* * //* 2. Uninstall any optional Java Software Development Kits * //* which are installed on this copy of the WebSphere * //* Application Server product. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product which is to * //* be uninstalled. The portable install filesystem must be * //* mounted read/write at this locatiom. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //* Log and properties files may be left behind even if the * //* uninstall is successful. Delete these files before reusing * //* the filesystem for a new product install. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the WebSphere Application Server V8.5 base * //* product * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + uninstall com.ibm.websphere.zOS.v85 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/was + -accessRights group /* ./ ADD NAME=BBO2CFS //BBO2CFS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job allocates and mounts a new HFS or zFS filesystem for * //* the WebSphere Application Server V8.5 DMZ Secure Proxy Server * //* product. * //* * //* Ensure you execute this job from a userid that is UID=0 * //* or is permitted to the 'BPX.SUPERUSER' facility class. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) To use a different data set name for the product file system, * //* change 'BBO.V8R5.SDYZZFS' to the desired value. * //* * //* 4) To create an HFS filesystem instead of a zFS filesystem, * //* change "-type ZFS" to "-type HFS". * //* * //* 5) Set the -volume, -storclas, -dataclas, and -mgmtclas to the * //* appropriate volume and SMS storage, data, and management * //* classes for the new filesystem. Delete any allocation * //* parameters which are not needed on your system. * //* * //* 6) Change $LEVEL to indicate the level you are installing (e.g. * //* 8.5.5.13) or some other identifier for this copy of the * //* product. You may want to add this same value (in some form) * //* to the filesystem data set name (-name) above. * //* * //* The filesystem must always be mounted (read/write) at this * //* path when it is being updated with Installation Manager. * //* It should be remounted (read-only) at another location for * //* actual product use. * //* * //* 7) Change IMADMIN and IMGROUP to the SAF user ID and group that * //* will "own" this package group's files. This will usually be * //* the same user ID and group that own the Installation Manager * //* instance to which the package group belongs. * //* * //* 8) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* The mountpoint directory, and any required directories above it, * //* will be created. Initial permissions for these directories are * //* set to 755. To alter this initial setting, specify -perm on * //* the zCreateFileSystem.sh call, followed by the desired initial * //* permissions. * //* * //********************************************************************* //* //**************************************************************** //* The following step allocates a new filesystem for the * //* WebSphere Application Server V8.5 DMZ Secure Proxy Server * //* product. * //**************************************************************** //CREATE EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/zCreateFileSystem.sh + -name BBO.V8R5.SDYZZFS + -type ZFS + -volume hhhhhh + -storclas ssssssss + -dataclas dddddddd + -mgmtclas mmmmmmmm + -cylinders 1400 140 + -mountpoint + /global/instmgr/products/WebSphere/SecureProxy/$LEVEL + -owner IMADMIN + -group IMGROUP /* ./ ADD NAME=BBO2CFSP //BBO2CFSP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job allocates and mounts a new HFS or zFS filesystem for * //* the WebSphere Application Server V8.5 DMZ Secure Proxy Server * //* product. * //* * //* Ensure you execute this job from a userid that is UID=0 * //* or is permitted to the 'BPX.SUPERUSER' facility class. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) To use a different data set name for the product file system, * //* change 'BBO.V8R5.SDYZZFS' to the desired value. * //* * //* 4) To create an HFS filesystem instead of a zFS filesystem, * //* change "-type ZFS" to "-type HFS". * //* * //* 5) Set the -volume, -storclas, -dataclas, and -mgmtclas to the * //* appropriate volume and SMS storage, data, and management * //* classes for the new filesystem. Delete any allocation * //* parameters which are not needed on your system. * //* * //* 6) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which will contain the installed * //* products(s) and their Installation Manager metadata and logs. * //* You may want to include some form of the $INSTALL value in * //* the filesystem dataset name. The filesystem must be mounted * //* at this location whenever the product(s) are serviced with * //* Installation Manager. * //* * //* 7) If optional Java Software Development Kits or additional * //* products (such as IBM HTTP Server) will be added to the * //* portable install, increase the space allocation (-cylinders) + //* accordingly. * //* * //* 8) Change IMADMIN and IMGROUP to the SAF user ID and group that * //* will "own" this package group's files. This will usually be * //* the same user ID and group that own the Installation Manager * //* instance to which the package group belongs. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* The mountpoint directory, and any required directories above it, * //* will be created. Initial permissions for these directories are * //* set to 755. To alter this initial setting, specify -perm on * //* the zCreateFileSystem.sh call, followed by the desired initial * //* permissions. * //* * //********************************************************************* //* //**************************************************************** //* The following step allocates a new filesystem for the * //* WebSphere Application Server V8.5 DMZ Secure Proxy Server * //* product. * //**************************************************************** //CREATE EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/zCreateFileSystem.sh + -name BBO.V8R5.SDYZZFS + -type ZFS + -volume hhhhhh + -storclas ssssssss + -dataclas dddddddd + -mgmtclas mmmmmmmm + -cylinders 2400 200 + -mountpoint + /global/instmgr/$INSTALL + -owner IMADMIN + -group IMGROUP /* ./ ADD NAME=BBO2INS //BBO2INS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5 DMZ * //* Secure Proxy Server product from the web-based product and * //* service repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Create an Installation Manager if you have not already * //* done so. You will need to know the path to the binaries * //* directory for the Installation Manager. * //* * //* 2. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 3. Edit and submit sample job BBO2CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) If you specify only the package name, the product will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the product to be installed. * //* * //* com.ibm.websphere.NDDMZ.zOS.v85_8.5.5016.20190801_1024 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change '/global/instmgr/products/WebSphere/SecureProxy/ * //* $LEVEL' to the path at which the product will be installed. * //* (This should match the path specified in BBO2CFS.) * //* * //* 5) Change '/global/instmgr/sharedResources' to the path for * //* the Installation Manager shared resources directory, if you * //* have chosen a different location. This value is set once * //* per Installation Manager, when the first product install is * //* performed, and cannot be changed by a later install. * //* * //* 6) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 7) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 8) This job will install all recommended interim fixes (iFixes) * //* from the web-based service repository. Change 'recommended' * //* to 'none' if you do not want iFixes to be installed. * //* * //* 9) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 10) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5 DMZ Secure * //* Proxy Server product from the web-based product and * //* service repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.NDDMZ.zOS.v85 + -installationDirectory + /global/instmgr/products/WebSphere/SecureProxy/$LEVEL + -sharedResourcesDirectory + /global/instmgr/sharedResources + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.zOS.v85 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -installFixes recommended + -acceptLicense /* ./ ADD NAME=BBO2INSL //BBO2INSL JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5 DMZ * //* Secure Proxy Server product from a local repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Create an Installation Manager if you have not already * //* done so. You will need to know the path to the binaries * //* directory for the Installation Manager. * //* * //* 2. Obtain the following base product repository file from the * //* product media, or directly from ShopzSeries: * //* * //* was.repo.8550.zOS.zip (approximately 1200 MB) * //* * //* Physical media: The file is on the z/OS Compressed * //* Repositories DVD. Transfer it in binary to your z/OS * //* system. * //* * //* ShopzSeries: Go to the Download page for your order and * //* select Additional Publications (either Download Director * //* or HTTPS). The repository you need is named cd777010.zip. * //* Download it, rename it to was.repo.8550.zOS.zip, and * //* transfer it in binary to your z/OS system. * //* * //* We recommend that you create a repo subdirectory in your * //* Installation Manager file system for repository zip files. * //* Since these files are large, you may want to create a * //* separate file system for them. You can use the Installation * //* Manager sample job GIN2REPO to create and mount this file * //* system. * //* * //* 3. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 8.5.5-WS-WAS-OS390-FPnnn.zip (approximately 2000 MB) * //* * //* Keep this file in the same location as the base product * //* repository file. Make sure both files can be read by the * //* Installation Manager user ID. * //* * //* If the fix pack consists of several zip files (part1.zip, * //* part2.zip, and so on), then use an unzip tool or jar -xvf * //* to uncompress the fix pack zip files into a single empty * //* directory, and change the pointer to the singe fix pack * //* zip file (in -repositories, below) to point to the single * //* fix pack directory instead. * //* * //* 4. Edit and submit sample job BBO2CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/SecureProxy/ * //* $LEVEL' to the path at which the product will be installed. * //* (This should match the path specified in BBO2CFS.) * //* * //* 4) Change '/global/instmgr/sharedResources' to the path for * //* the Installation Manager shared resources directory, if you * //* have chosen a different location. This value is set once * //* per Installation Manager, when the first product install is * //* performed, and cannot be changed by a later install. * //* * //* 5) Change '/global/instmgr/repo' to the directory that * //* contains the product repositories. Make sure all file * //* can be read by your Installation Manager user ID. * //* * //* Change the file names of the fix pack repository files to * //* match the ones you downloaded from Fix Central. * //* * //* 6) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 7) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5 DMZ Secure * //* Proxy Server from local product and fix pack repositories. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.NDDMZ.zOS.v85 + -installationDirectory + /global/instmgr/products/WebSphere/SecureProxy/$LEVEL + -sharedResourcesDirectory + /global/instmgr/sharedResources + -repositories + /global/instmgr/repo/was.repo.8550.zOS.zip,+ /global/instmgr/repo/8.5.5-WS-WAS-OS390-FPnnn.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -acceptLicense /* ./ ADD NAME=BBO2INSP //BBO2INSP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5 DMZ * //* Secure Proxy Server product from the web-based product and * //* service repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 2. Edit and submit sample job BBO2CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) If you specify only the package name, the product will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the product to be installed. * //* * //* com.ibm.websphere.NDDMZ.zOS.v85_8.5.5016.20190801_1024 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which will contain the installed product * //* and its Installation Manager metata and logs. (This value * //* should match the value specified in BBO1CFS.) * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will install all recommended interim fixes (iFixes) * //* from the web-based service repository. Change 'recommended' * //* to 'none' if you do not want iFixes to be installed. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5 DMZ Secure * //* Proxy Server product from the web-based product and * //* service repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.NDDMZ.zOS.v85 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/nddmz + -sharedResourcesDirectory + /global/instmgr/$INSTALL/.im/sharedResources + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.zOS.v85 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -accessRights group + -installFixes recommended + -acceptLicense /* ./ ADD NAME=BBO2INSQ //BBO2INSQ JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5 DMZ * //* Secure Proxy Server product from a local repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Obtain the following base product repository file from the * //* product media, or directly from ShopzSeries: * //* * //* was.repo.8550.zOS.zip (approximately 1200 MB) * //* * //* Physical media: The file is on the z/OS Compressed * //* Repositories DVD. Transfer it in binary to your z/OS * //* system. * //* * //* ShopzSeries: Go to the Download page for your order and * //* select Additional Publications (either Download Director * //* or HTTPS). The repository you need is named cd777010.zip. * //* Download it, rename it to was.repo.8550.zOS.zip, and * //* transfer it in binary to your z/OS system. * //* * //* We recommend that you create a repo subdirectory in your * //* Installation Manager file system for repository zip files. * //* Since these files are large, you may want to create a * //* separate file system for them. You can use the Installation * //* Manager sample job GIN2REPO to create and mount this file * //* system. * //* * //* 2. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 8.5.5-WS-WAS-OS390-FPnnn.zip (approximately 2000 MB) * //* * //* Keep this file in the same location as the base product * //* repository file. Make sure both files can be read by the * //* Installation Manager user ID. * //* * //* If the fix pack consists of several zip files (part1.zip, * //* part2.zip, and so on), then use an unzip tool or jar -xvf * //* to uncompress the fix pack zip files into a single empty * //* directory, and change the pointer to the singe fix pack * //* zip file (in -repositories, below) to point to the single * //* fix pack directory instead. * //* * //* 3. Edit and submit sample job BBO2CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which will contain the installed product * //* and its Installation Manager metata and logs. (This value * //* should match the value specified in BBO1CFS.) * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Change '/global/instmgr/repo' to the directory that * //* contains the product repositories. Make sure all file * //* can be read by your Installation Manager user ID. * //* * //* Change the file names of the fix pack repository files to * //* match the ones you downloaded from Fix Central. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5 DMZ Secure * //* Proxy Server from local product and fix pack repositories. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.NDDMZ.zOS.v85 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/nddmz + -sharedResourcesDirectory + /global/instmgr/$INSTALL/.im/sharedResources + -repositories + /global/instmgr/repo/was.repo.8550.zOS.zip,+ /global/instmgr/repo/8.5.5-WS-WAS-OS390-FPnnn.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -accessRights group + -acceptLicense /* ./ ADD NAME=BBO2INST //BBO2INST JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5 DMZ * //* Secure Proxy Server product from the SMP/E-maintained product * //* repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Create an Installation Manager if you have not already * //* done so. You will need to know the path to the binaries * //* directory for the Installation Manager. * //* * //* 2. Mount the SMP/E-managed product repository (BBO.SBBOIMR) * //* at /usr/lpp/InstallationManagerRepository/HBBO850. * //* This filesystem should be mounted read-only. * //* * //* 3. Edit and submit sample job BBO2CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/SecureProxy/ * //* $LEVEL' to the path at which the product will be installed. * //* (This should match the path specified in BBO2CFS.) * //* * //* 4) Change '/global/instmgr/sharedResources' to the path for * //* the Installation Manager shared resources directory, if you * //* have chosen a different location. This value is set once * //* per Installation Manager, when the first product install is * //* performed, and cannot be changed by a later install. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5 DMZ Secure * //* Proxy Server product from the SMP/E-managed product and * //* service repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.NDDMZ.zOS.v85 + -installationDirectory + /global/instmgr/products/WebSphere/SecureProxy/$LEVEL + -sharedResourcesDirectory + /global/instmgr/sharedResources + -repositories /usr/lpp/global/instmgrRepository/HBBO850 + -preferences com.ibm.cic.common.core.preferences.preserveDownlo+ adedArtifacts=false + -acceptLicense /* ./ ADD NAME=BBO2UNIN //BBO2UNIN JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job uninstalls the WebSphere Application Server V8.5 DMZ * //* Secure Proxy Server product with IBM Installation Manager. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server V8.5 * //* Secure Proxy product you wish to uninstall and mount its * //* filesystem (read/write) at the original install location. * //* * //* 2. Uninstall any optional Java Software Development Kits * //* which are installed on this copy of the WebSphere * //* Application DMZ Secure Proxy Server. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/SecureProxy/ * //* $LEVEL' to the installation directory of the copy of the * //* product to be uninstalled. The product filesystem must be * //* mounted (read/write) at this location. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with mme continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //* Log and properties files may be left behind even if the * //* uninstall is successful. Delete these files before reusing * //* the filesystem for a new product install. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the WebSphere Application Server V8.5 DMZ Secure * //* Proxy Server product. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + uninstall com.ibm.websphere.NDDMZ.zOS.v85 + -installationDirectory + /global/instmgr/products/WebSphere/SecureProxy/$LEVEL /* ./ ADD NAME=BBO2UNIP //BBO2UNIP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job uninstalls the WebSphere Application Server V8.5 DMZ * //* Secure Proxy Server product with IBM Installation Manager. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server V8.5 * //* Secure Proxy product you wish to uninstall and mount its * //* filesystem (read/write) at the original install location. * //* * //* 2. Uninstall any optional Java Software Development Kits * //* which are installed on this copy of the WebSphere * //* Application DMZ Secure Proxy Server. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product which is to * //* be uninstalled. The portable install filesystem must be * //* mounted read/write at this locatiom. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with mme continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //* Log and properties files may be left behind even if the * //* uninstall is successful. Delete these files before reusing * //* the filesystem for a new product install. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the WebSphere Application Server V8.5 DMZ Secure * //* Proxy Server product. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + uninstall com.ibm.websphere.NDDMZ.zOS.v85 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/nddmz + -accessRights group /* ./ ADD NAME=BBO3CFS //BBO3CFS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job allocates and mounts a new HFS or zFS filesystem for * //* the WebSphere Application Server V8.5 Web server plugins. * //* * //* Ensure you execute this job from a userid that is UID=0 * //* or is permitted to the 'BPX.SUPERUSER' facility class. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) To use a different data set name for the product file system, * //* change 'BBO.V8R5.SIWOZFS' to the desired value. * //* * //* 4) To create an HFS filesystem instead of a zFS filesystem, * //* change "-type ZFS" to "-type HFS". * //* * //* 5) Set the -volume, -storclas, -dataclas, and -mgmtclas to the * //* appropriate volume and SMS storage, data, and management * //* classes for the new filesystem. Delete any allocation * //* parameters which are not needed on your system. * //* * //* 6) Change $LEVEL to indicate the level you are installing (e.g. * //* 8.5.5.13) or some other identifier for this copy of the * //* product. You may want to add this same value (in some form) * //* to the filesystem data set name (-name) above. * //* * //* The filesystem must always be mounted (read/write) at this * //* path when it is being updated with Installation Manager. * //* It should be remounted (read-only) at another location for * //* actual product use. * //* * //* 7) Change IMADMIN and IMGROUP to the SAF user ID and group that * //* will "own" this package group's files. This will usually be * //* the same user ID and group that own the Installation Manager * //* instance to which the package group belongs. * //* * //* 8) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* The mountpoint directory, and any required directories above it, * //* will be created. Initial permissions for these directories are * //* set to 755. To alter this initial setting, specify -perm on * //* the zCreateFileSystem.sh call, followed by the desired initial * //* permissions. * //* * //********************************************************************* //* //**************************************************************** //* The following step allocates a new filesystem for the * //* WebSphere Application Server V8.5 Web server plugins. * //**************************************************************** //CREATE EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/zCreateFileSystem.sh + -name BBO.V8R5.SIWOZFS + -type ZFS + -volume hhhhhh + -storclas ssssssss + -dataclas dddddddd + -mgmtclas mmmmmmmm + -cylinders 60 10 + -mountpoint + /global/instmgr/products/WebSphere/Plugins/$LEVEL + -owner IMADMIN + -group IMGROUP /* ./ ADD NAME=BBO3CFSP //BBO3CFSP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job allocates and mounts a new HFS or zFS filesystem for * //* the WebSphere Application Server V8.5 Web server plugins. * //* * //* Ensure you execute this job from a userid that is UID=0 * //* or is permitted to the 'BPX.SUPERUSER' facility class. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) To use a different data set name for the product file system, * //* change 'BBO.V8R5.SIWOZFS' to the desired value. * //* * //* 4) To create an HFS filesystem instead of a zFS filesystem, * //* change "-type ZFS" to "-type HFS". * //* * //* 5) Set the -volume, -storclas, -dataclas, and -mgmtclas to the * //* appropriate volume and SMS storage, data, and management * //* classes for the new filesystem. Delete any allocation * //* parameters which are not needed on your system. * //* * //* 6) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which will contain the installed * //* products(s) and their Installation Manager metadata and logs. * //* You may want to include some form of the $INSTALL value in * //* the filesystem dataset name. The filesystem must be mounted * //* at this location whenever the product(s) are serviced with * //* Installation Manager. * //* * //* 7) If additional products will be added to the portable install, * //* increase the space allocation (-cylinders) accordingly. * //* * //* 8) Change IMADMIN and IMGROUP to the SAF user ID and group that * //* will "own" this package group's files. This will usually be * //* the same user ID and group that own the Installation Manager * //* instance to which the package group belongs. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* The mountpoint directory, and any required directories above it, * //* will be created. Initial permissions for these directories are * //* set to 755. To alter this initial setting, specify -perm on * //* the zCreateFileSystem.sh call, followed by the desired initial * //* permissions. * //* * //********************************************************************* //* //**************************************************************** //* The following step allocates a new filesystem for the * //* WebSphere Application Server V8.5 Web server plugins. * //**************************************************************** //CREATE EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/zCreateFileSystem.sh + -name BBO.V8R5.SIWOZFS + -type ZFS + -volume hhhhhh + -storclas ssssssss + -dataclas dddddddd + -mgmtclas mmmmmmmm + -cylinders 100 20 + -mountpoint + /global/instmgr/$INSTALL + -owner IMADMIN + -group IMGROUP /* ./ ADD NAME=BBO3INS //BBO3INS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5 Web * //* server plugins from the web-based product and service * //* repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Create an Installation Manager if you have not already * //* done so. You will need to know the path to the binaries * //* directory for the Installation Manager. * //* * //* 2. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* system). * //* * //* 3. Edit and submit sample job BBO3CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) If you specify only the package name, the product will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the product to be installed. * //* * //* com.ibm.websphere.PLG.zOS.v85_8.5.5016.20190801_1046 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change '/global/instmgr/products/WebSphere/Plugins/$LEVEL' * //* to the path at which the product will be installed. (This * //* should match the path specified in BBO3CFS.) * //* * //* 5) Change '/global/instmgr/sharedResources' to the path for * //* the Installation Manager shared resources directory, if you * //* have chosen a different location. This value is set once * //* per Installation Manager, when the first product install is * //* performed, and cannot be changed by a later install. * //* * //* 6) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 7) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 8) This job will install all recommended interim fixes (iFixes) * //* from the web-based service repository. Change 'recommended' * //* to 'none' if you do not want iFixes to be installed. * //* * //* 9) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 10) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5 Web server * //* plugins from the web-based product and service repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.PLG.zOS.v85 + -installationDirectory + /global/instmgr/products/WebSphere/Plugins/$LEVEL + -sharedResourcesDirectory + /global/instmgr/sharedResources + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.PLG.zOS.v85 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -installFixes recommended + -acceptLicense /* ./ ADD NAME=BBO3INSL //BBO3INSL JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5 Web * //* server plugins from a local repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Create an Installation Manager if you have not already * //* done so. You will need to know the path to the binaries * //* directory for the Installation Manager. * //* * //* 2. Obtain the following base product repository file from the * //* product media, or directly from ShopzSeries: * //* * //* was.repo.8550.plugins.zOS.zip (approximately 40 MB) * //* * //* Physical media: The file is on the z/OS Compressed * //* Repositories DVD. Transfer it in binary to your z/OS * //* system. * //* * //* ShopzSeries: Go to the Download page for your order and * //* select Additional Publications (either Download Director * //* or HTTPS). The repository you need is named cd777030.zip. * //* Download it, rename it to was.repo.8550.plugins.zOS.zip, * //* and transfer it in binary to your z/OS system. * //* * //* We recommend that you create a repo subdirectory in your * //* Installation Manager file system for repository zip files. * //* Since these files are large, you may want to create a * //* separate file system for them. You can use the Installation * //* Manager sample job GIN2REPO to create and mount this file * //* system. * //* * //* 3. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 8.5.5-WS-PLG-OS390-FPnnn.zip (approximately 40 MB) * //* * //* Keep this file in the same location as the base product * //* repository file. Make sure both files can be read by the * //* Installation Manager user ID. * //* * //* If the fix pack consists of several zip files (part1.zip, * //* part2.zip, and so on), then use an unzip tool or jar -xvf * //* to uncompress the fix pack zip files into a single empty * //* directory, and change the pointer to the singe fix pack * //* zip file (in -repositories, below) to point to the single * //* fix pack directory instead. * //* * //* 4. Edit and submit sample job BBO3CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/Plugins/$LEVEL * //* to the path at which the product will be installed. (This * //* should match the path specified in BBO3CFS.) * //* * //* 4) Change '/global/instmgr/sharedResources' to the path for * //* the Installation Manager shared resources directory, if you * //* have chosen a different location. This value is set once * //* per Installation Manager, when the first product install is * //* performed, and cannot be changed by a later install. * //* * //* 5) Change '/global/instmgr/repo' to the directory that * //* contains the product repositories. Make sure all file * //* can be read by your Installation Manager user ID. * //* * //* Change the file names of the fix pack repository files to * //* match the ones you downloaded from Fix Central. * //* * //* 6) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 7) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5 Web server * //* plugins from local product and fix pack repositories. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.PLG.zOS.v85 + -installationDirectory + /global/instmgr/products/WebSphere/Plugins/$LEVEL + -sharedResourcesDirectory + /global/instmgr/sharedResources + -repositories + /global/instmgr/repo/was.repo.8550.plugins.zOS.zip,+ /global/instmgr/repo/8.5.5-WS-PLG-OS390-FPnnn.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -acceptLicense /* ./ ADD NAME=BBO3INSP //BBO3INSP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5 Web * //* server plugins from the web-based product and service * //* repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* system). * //* * //* 2. Edit and submit sample job BBO3CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) If you specify only the package name, the product will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the product to be installed. * //* * //* com.ibm.websphere.PLG.zOS.v85_8.5.5016.20190801_1046 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which will contain the installed product * //* and its Installation Manager metata and logs. (This value * //* should match the value specified in BBO3CFSP.) * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will install all recommended interim fixes (iFixes) * //* from the web-based service repository. Change 'recommended' * //* to 'none' if you do not want iFixes to be installed. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5 Web server * //* plugins from the web-based product and service repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.PLG.zOS.v85 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/plugins + -sharedResourcesDirectory + /global/instmgr/$INSTALL/.im/sharedResources + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.PLG.zOS.v85 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -accessRights group + -installFixes recommended + -acceptLicense /* ./ ADD NAME=BBO3INSQ //BBO3INSQ JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5 Web * //* server plugins from a local repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Obtain the following base product repository file from the * //* product media, or directly from ShopzSeries: * //* * //* was.repo.8550.plugins.zOS.zip (approximately 40 MB) * //* * //* Physical media: The file is on the z/OS Compressed * //* Repositories DVD. Transfer it in binary to your z/OS * //* system. * //* * //* ShopzSeries: Go to the Download page for your order and * //* select Additional Publications (either Download Director * //* or HTTPS). The repository you need is named cd777030.zip. * //* Download it, rename it to was.repo.8550.plugins.zOS.zip, * //* and transfer it in binary to your z/OS system. * //* * //* We recommend that you create a repo subdirectory in your * //* Installation Manager file system for repository zip files. * //* Since these files are large, you may want to create a * //* separate file system for them. You can use the Installation * //* Manager sample job GIN2REPO to create and mount this file * //* system. * //* * //* 2. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 8.5.5-WS-PLG-OS390-FPnnn.zip (approximately 40 MB) * //* * //* Keep this file in the same location as the base product * //* repository file. Make sure both files can be read by the * //* Installation Manager user ID. * //* * //* If the fix pack consists of several zip files (part1.zip, * //* part2.zip, and so on), then use an unzip tool or jar -xvf * //* to uncompress the fix pack zip files into a single empty * //* directory, and change the pointer to the singe fix pack * //* zip file (in -repositories, below) to point to the single * //* fix pack directory instead. * //* * //* 3. Edit and submit sample job BBO3CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which will contain the installed product * //* and its Installation Manager metata and logs. (This value * //* should match the value specified in BBO3CFSP.) * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Change '/global/instmgr/repo' to the directory that * //* contains the product repositories. Make sure all file * //* can be read by your Installation Manager user ID. * //* * //* Change the file names of the fix pack repository files to * //* match the ones you downloaded from Fix Central. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5 Web server * //* plugins from local product and fix pack repositories. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.PLG.zOS.v85 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/plugins + -sharedResourcesDirectory + /global/instmgr/$INSTALL/.im/sharedResources + -repositories + /global/instmgr/repo/was.repo.8550.plugins.zOS.zip,+ /global/instmgr/repo/8.5.5-WS-PLG-OS390-FPnnn.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -accessRights group + -acceptLicense /* ./ ADD NAME=BBO3INST //BBO3INST JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5 Web * //* server plugins from the SMP/E-maintained product repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Create an Installation Manager if you have not already * //* done so. You will need to know the path to the binaries * //* directory for the Installation Manager. * //* * //* 2. Mount the SMP/E-managed product repository (BBO.SBBOIMR) * //* at /usr/lpp/InstallationManagerRepository/HBBO850. * //* This filesystem should be mounted read-only. * //* * //* 3. Edit and submit sample job BBO3CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/Plugins/$LEVEL' * //* to the path at which the product will be installed. (This * //* should match the path specified in BBO1CFS.) * //* * //* 4) Change '/global/instmgr/sharedResources' to the path for * //* the Installation Manager shared resources directory, if you * //* have chosen a different location. This value is set once * //* per Installation Manager, when the first product install is * //* performed, and cannot be changed by a later install. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5 Web server * //* plugins. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.PLG.zOS.v85 + -installationDirectory + /global/instmgr/products/WebSphere/Plugins/$LEVEL + -sharedResourcesDirectory + /global/instmgr/sharedResources + -repositories /usr/lpp/InstallationManagerRepository/HBBO850 + -preferences com.ibm.cic.common.core.preferences.preserveDownlo+ adedArtifacts=false + -acceptLicense /* ./ ADD NAME=BBO3UNIN //BBO3UNIN JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job uninstalls the WebSphere Application Server V8.5 Web * //* server plugins with IBM Installation Manager. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server Web * //* Server Plugins product you wish to uninstall and mount its * //* filesystem (read/write) at the original install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/Plugins/$LEVEL' * //* to the installation directory of the copy of the product to * //* be uninstalled. The product filesystem must be mounted * //* (read/write) at this location. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //* Log and properties files may be left behind even if the * //* uninstall is successful. Delete these files before reusing * //* the filesystem for a new product install. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the WebSphere Application Server V8.5 Web server * //* plugins. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + uninstall com.ibm.websphere.PLG.zOS.v85 + -installationDirectory + /global/instmgr/products/WebSphere/Plugins/$LEVEL /* ./ ADD NAME=BBO3UNIP //BBO3UNIP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job uninstalls the WebSphere Application Server V8.5 Web * //* server plugins with IBM Installation Manager. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server Web * //* Server Plugins product you wish to uninstall and mount its * //* filesystem (read/write) at the original install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product which is to * //* be uninstalled. The portable install filesystem must be * //* mounted read/write at this locatiom. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //* Log and properties files may be left behind even if the * //* uninstall is successful. Delete these files before reusing * //* the filesystem for a new product install. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the WebSphere Application Server V8.5 Web server * //* plugins. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + uninstall com.ibm.websphere.PLG.zOS.v85 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/plugins + -accessRights group /* ./ ADD NAME=BBO4CFS //BBO4CFS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job allocates and mounts a new HFS or zFS filesystem for * //* the IBM HTTP Server V8.5 product. * //* * //* Ensure you execute this job from a userid that is UID=0 * //* or is permitted to the 'BPX.SUPERUSER' facility class. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) To use a different data set name for the product file system, * //* change 'BBO.V8R5.SHAPZFS' to the desired value. * //* * //* 4) To create an HFS filesystem instead of a zFS filesystem, * //* change "-type ZFS" to "-type HFS". * //* * //* 5) Set the -volume, -storclas, -dataclas, and -mgmtclas to the * //* appropriate volume and SMS storage, data, and management * //* classes for the new filesystem. Delete any allocation * //* parameters which are not needed on your system. * //* * //* 6) Change $LEVEL to indicate the level you are installing (e.g. * //* 8.5.5.13) or some other identifier for this copy of the * //* product. You may want to add this same value (in some form) * //* to the filesystem data set name (-name) above. * //* * //* The filesystem must always be mounted (read/write) at this * //* path when it is being updated with Installation Manager. * //* It should be remounted (read-only) at another location for * //* actual product use. * //* * //* 7) Change IMADMIN and IMGROUP to the SAF user ID and group that * //* will "own" this package group's files. This will usually be * //* the same user ID and group that own the Installation Manager * //* instance to which the package group belongs. * //* * //* 8) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* The mountpoint directory, and any required directories above it, * //* will be created. Initial permissions for these directories are * //* set to 755. To alter this initial setting, specify -perm on * //* the zCreateFileSystem.sh call, followed by the desired initial * //* permissions. * //* * //********************************************************************* //* //**************************************************************** //* The following step allocates a new filesystem for the * //* IBM HTTP Server V8.5 product. * //**************************************************************** //CREATE EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/zCreateFileSystem.sh + -name BBO.V8R5.SHAPZFS + -type ZFS + -volume hhhhhh + -storclas ssssssss + -dataclas dddddddd + -mgmtclas mmmmmmmm + -cylinders 100 10 + -mountpoint + /global/instmgr/products/IHSA/$LEVEL + -owner IMADMIN + -group IMGROUP /* ./ ADD NAME=BBO4CFSP //BBO4CFSP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job allocates and mounts a new HFS or zFS filesystem for * //* the IBM HTTP Server V8.5 product. * //* * //* Ensure you execute this job from a userid that is UID=0 * //* or is permitted to the 'BPX.SUPERUSER' facility class. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) To use a different data set name for the product file system, * //* change 'BBO.V8R5.SHAPZFS' to the desired value. * //* * //* 4) To create an HFS filesystem instead of a zFS filesystem, * //* change "-type ZFS" to "-type HFS". * //* * //* 5) Set the -volume, -storclas, -dataclas, and -mgmtclas to the * //* appropriate volume and SMS storage, data, and management * //* classes for the new filesystem. Delete any allocation * //* parameters which are not needed on your system. * //* * //* 6) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which will contain the installed * //* products(s) and their Installation Manager metadata and logs. * //* You may want to include some form of the $INSTALL value in * //* the filesystem dataset name. The filesystem must be mounted * //* at this location whenever the product(s) are serviced with * //* Installation Manager. * //* * //* 7) If additional products will be added to the portable install, * //* increase the space allocation (-cylinders) accordingly. * //* * //* 8) Change IMADMIN and IMGROUP to the SAF user ID and group that * //* will "own" this package group's files. This will usually be * //* the same user ID and group that own the Installation Manager * //* instance to which the package group belongs. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* The mountpoint directory, and any required directories above it, * //* will be created. Initial permissions for these directories are * //* set to 755. To alter this initial setting, specify -perm on * //* the zCreateFileSystem.sh call, followed by the desired initial * //* permissions. * //* * //********************************************************************* //* //**************************************************************** //* The following step allocates a new filesystem for the * //* IBM HTTP Server V8.5 product. * //**************************************************************** //CREATE EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/zCreateFileSystem.sh + -name BBO.V8R5.SHAPZFS + -type ZFS + -volume hhhhhh + -storclas ssssssss + -dataclas dddddddd + -mgmtclas mmmmmmmm + -cylinders 120 10 + -mountpoint + /global/instmgr/$INSTALL + -owner IMADMIN + -group IMGROUP /* ./ ADD NAME=BBO4INS //BBO4INS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the IBM HTTP Server V8.5 product from the * //* web-based product and service repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Create an Installation Manager if you have not already * //* done so. You will need to know the path to the binaries * //* directory for the Installation Manager. * //* * //* 2. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 3. Edit and submit sample job BBO4CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) If you specify only the package name, the product will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the product to be installed. * //* * //* com.ibm.websphere.IHS.zOS.v85_8.5.5016.20190801_1043 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change '/global/instmgr/products/IHSA/$LEVEL' to the * //* path at which the product will be installed. (This should * //* match the path specified in BBO4CFS.) * //* * //* 5) Change '/global/instmgr/sharedResources' to the path for * //* the Installation Manager shared resources directory, if you * //* have chosen a different location. This value is set once * //* per Installation Manager, when the first product install is * //* performed, and cannot be changed by a later install. * //* * //* 6) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 7) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 8) This job will install all recommended interim fixes (iFixes) * //* from the web-based service repository. Change 'recommended' * //* to 'none' if you do not want iFixes to be installed. * //* * //* 9) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 10) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM HTTP Server product from the web-based * //* product and service repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.IHS.zOS.v85 + -installationDirectory + /global/instmgr/products/IHSA/$LEVEL + -sharedResourcesDirectory + /global/instmgr/sharedResources + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.IHS.zOS.v85 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -installFixes recommended + -acceptLicense /* ./ ADD NAME=BBO4INSL //BBO4INSL JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the IBM HTTP Server V8.5 product from a local * //* repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Create an Installation Manager if you have not already * //* done so. You will need to know the path to the binaries * //* directory for the Installation Manager. * //* * //* 2. Obtain the following base product repository file from the * //* product media, or directly from ShopzSeries: * //* * //* was.repo.8550.ihs.zOS.zip (approximately 40 MB) * //* * //* Physical media: The file is on the z/OS Compressed * //* Repositories DVD. Transfer it in binary to your z/OS * //* system. * //* * //* ShopzSeries: Go to the Download page for your order and * //* select Additional Publications (either Download Director * //* or HTTPS). The repository you need is named cd777040.zip. * //* Download it, rename it to was.repo.8550.ihs.zOS.zip, and * //* transfer it in binary to your z/OS system. * //* * //* We recommend that you create a repo subdirectory in your * //* Installation Manager file system for repository zip files. * //* Since these files are large, you may want to create a * //* separate file system for them. You can use the Installation * //* Manager sample job GIN2REPO to create and mount this file * //* system. * //* * //* 3. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 8.5.5-WS-IHS-OS390-FPnnn.zip (approximately 40 MB) * //* * //* Keep this file in the same location as the base product * //* repository file. Make sure both files can be read by the * //* Installation Manager user ID. * //* * //* If the fix pack consists of several zip files (part1.zip, * //* part2.zip, and so on), then use an unzip tool or jar -xvf * //* to uncompress the fix pack zip files into a single empty * //* directory, and change the pointer to the singe fix pack * //* zip file (in -repositories, below) to point to the single * //* fix pack directory instead. * //* * //* 4. Edit and submit sample job BBO4CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/IHSA/$LEVEL' to the * //* path at which the product will be installed. (This should * //* match the path specified in BBO3CFS.) * //* * //* 4) Change '/global/instmgr/sharedResources' to the path for * //* the Installation Manager shared resources directory, if you * //* have chosen a different location. This value is set once * //* per Installation Manager, when the first product install is * //* performed, and cannot be changed by a later install. * //* * //* 5) Change '/global/instmgr/repo' to the directory that * //* contains the product repositories. Make sure all file * //* can be read by your Installation Manager user ID. * //* * //* Change the file names of the fix pack repository files to * //* match the ones you downloaded from Fix Central. * //* * //* 6) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 7) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM HTTP Server product from local product * //* and fix pack repositories. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.IHS.zOS.v85 + -installationDirectory + /global/instmgr/products/IHSA/$LEVEL + -sharedResourcesDirectory + /global/instmgr/sharedResources + -repositories + /global/instmgr/repo/was.repo.8550.ihs.zOS.zip,+ /global/instmgr/repo/8.5.5-WS-IHS-OS390-FPnnn.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -acceptLicense /* ./ ADD NAME=BBO4INSP //BBO4INSP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the IBM HTTP Server V8.5 product from the * //* web-based product and service repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 2. Edit and submit sample job BBO4CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) If you specify only the package name, the product will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the product to be installed. * //* * //* com.ibm.websphere.IHS.zOS.v85_8.5.5016.20190801_1043 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which will contain the installed product * //* and its Installation Manager metata and logs. (This value * //* should match the value specified in BBO3CFSP.) * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will install all recommended interim fixes (iFixes) * //* from the web-based service repository. Change 'recommended' * //* to 'none' if you do not want iFixes to be installed. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM HTTP Server product from the web-based * //* product and service repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.IHS.zOS.v85 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/ihs + -sharedResourcesDirectory + /global/instmgr/$INSTALL/.im/sharedResources + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.IHS.zOS.v85 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -accessRights group + -installFixes recommended + -acceptLicense /* ./ ADD NAME=BBO4INSQ //BBO4INSQ JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the IBM HTTP Server V8.5 product from a local * //* repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Obtain the following base product repository file from the * //* product media, or directly from ShopzSeries: * //* * //* was.repo.8550.ihs.zOS.zip (approximately 40 MB) * //* * //* Physical media: The file is on the z/OS Compressed * //* Repositories DVD. Transfer it in binary to your z/OS * //* system. * //* * //* ShopzSeries: Go to the Download page for your order and * //* select Additional Publications (either Download Director * //* or HTTPS). The repository you need is named cd777040.zip. * //* Download it, rename it to was.repo.8550.ihs.zOS.zip, and * //* transfer it in binary to your z/OS system. * //* * //* We recommend that you create a repo subdirectory in your * //* Installation Manager file system for repository zip files. * //* Since these files are large, you may want to create a * //* separate file system for them. You can use the Installation * //* Manager sample job GIN2REPO to create and mount this file * //* system. * //* * //* 2. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 8.5.5-WS-IHS-OS390-FPnnn.zip (approximately 40 MB) * //* * //* Keep this file in the same location as the base product * //* repository file. Make sure both files can be read by the * //* Installation Manager user ID. * //* * //* If the fix pack consists of several zip files (part1.zip, * //* part2.zip, and so on), then use an unzip tool or jar -xvf * //* to uncompress the fix pack zip files into a single empty * //* directory, and change the pointer to the singe fix pack * //* zip file (in -repositories, below) to point to the single * //* fix pack directory instead. * //* * //* 3. Edit and submit sample job BBO4CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which will contain the installed product * //* and its Installation Manager metata and logs. (This value * //* should match the value specified in BBO4CFSP.) * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Change '/global/instmgr/repo' to the directory that * //* contains the product repositories. Make sure all file * //* can be read by your Installation Manager user ID. * //* * //* Change the file names of the fix pack repository files to * //* match the ones you downloaded from Fix Central. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM HTTP Server product from local product * //* and fix pack repositories. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.IHS.zOS.v85 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/ihs + -sharedResourcesDirectory + /global/instmgr/$INSTALL/.im/sharedResources + -repositories + /global/instmgr/repo/was.repo.8550.ihs.zOS.zip,+ /global/instmgr/repo/8.5.5-WS-IHS-OS390-FPnnn.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -accessRights group + -acceptLicense /* ./ ADD NAME=BBO4INST //BBO4INST JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the IBM HTTP Server V8.5 product from the * //* SMP/E-maintained product repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Create an Installation Manager if you have not already * //* done so. You will need to know the path to the binaries * //* directory for the Installation Manager. * //* * //* 2. Mount the SMP/E-managed product repository (BBO.SBBOIMR) * //* at /usr/lpp/InstallationManagerRepository/HBBO850. * //* This filesystem should be mounted read-only. * //* * //* 3. Edit and submit sample job BBO4CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/IHSA/$LEVEL' to the * //* path at which the product will be installed. (This should * //* match the path specified in BBO4CFS.) * //* * //* 4) Change '/global/instmgr/sharedResources' to the path for * //* the Installation Manager shared resources directory, if you * //* have chosen a different location. This value is set once * //* per Installation Manager, when the first product install is * //* performed, and cannot be changed by a later install. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM HTTP Server product. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.IHS.zOS.v85 + -installationDirectory + /global/instmgr/products/IHSA/$LEVEL + -sharedResourcesDirectory + /global/instmgr/sharedResources + -repositories /usr/lpp/InstallationManagerRepository/HBBO850 + -preferences com.ibm.cic.common.core.preferences.preserveDownlo+ adedArtifacts=false + -acceptLicense /* ./ ADD NAME=BBO4UNIN //BBO4UNIN JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job uninstalls the IBM HTTP Server V8.5 product with IBM * //* Installation Manager. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the IBM HTTP Server product you wish * //* to uninstall and mount its filesystem (read/write) at the * //* original install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/IHSA/$LEVEL' to the * //* installation directory of the copy of the product to be * //* uninstalled. The product filesystem must be mounted (read/ * //* write) at this location. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //* Log and properties files may be left behind even if the * //* uninstall is successful. Delete these files before reusing * //* the filesystem for a new product install. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the IBM HTTP Server V8.5 product. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + uninstall com.ibm.websphere.IHS.zOS.v85 + -installationDirectory + /global/instmgr/products/IHSA/$LEVEL /* ./ ADD NAME=BBO4UNIP //BBO4UNIP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job uninstalls the IBM HTTP Server V8.5 product with IBM * //* Installation Manager. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the IBM HTTP Server product you wish * //* to uninstall and mount its filesystem (read/write) at the * //* original install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product which is to * //* be uninstalled. The portable install filesystem must be * //* mounted read/write at this locatiom. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //* Log and properties files may be left behind even if the * //* uninstall is successful. Delete these files before reusing * //* the filesystem for a new product install. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the IBM HTTP Server V8.5 product. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + uninstall com.ibm.websphere.IHS.zOS.v85 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/ihs + -accessRights group /* ./ ADD NAME=BBO5CFS //BBO5CFS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job allocates and mounts a new HFS or zFS filesystem for * //* the WebSphere Application Server V8.5.5 Liberty runtime. (This * //* sample job requires a version of WebSphere Application Server * //* for z/OS at Fix Pack level 8.5.5 or above.) * //* * //* Ensure you execute this job from a userid that is UID=0 * //* or is permitted to the 'BPX.SUPERUSER' facility class. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) To use a different data set name for the product file system, * //* change 'BBO.V8R5.SWLPZFS' to the desired value. * //* * //* 4) To create an HFS filesystem instead of a zFS filesystem, * //* change "-type ZFS" to "-type HFS". * //* * //* 5) Set the -volume, -storclas, -dataclas, and -mgmtclas to the * //* appropriate volume and SMS storage, data, and management * //* classes for the new filesystem. Delete any allocation * //* parameters which are not needed on your system. * //* * //* 6) Change $LEVEL to indicate the level you are installing (e.g. * //* 8.5.5.13) or some other identifier for this copy of the * //* product. You may want to add this same value (in some form) * //* to the filesystem data set name (-name) above. * //* * //* The filesystem must always be mounted (read/write) at this * //* path when it is being updated with Installation Manager. * //* It should be remounted (read-only) at another location for * //* actual product use. * //* * //* 7) Change IMADMIN and IMGROUP to the SAF user ID and group that * //* will "own" this package group's files. This will usually be * //* the same user ID and group that own the Installation Manager * //* instance to which the package group belongs. * //* * //* 8) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* The mountpoint directory, and any required directories above it, * //* will be created. Initial permissions for these directories are * //* set to 755. To alter this initial setting, specify -perm on * //* the zCreateFileSystem.sh call, followed by the desired initial * //* permissions. * //* * //********************************************************************* //* //**************************************************************** //* The following step allocates a new filesystem for the * //* WebSphere Application Server V8.5.5 Liberty runtime. * //**************************************************************** //CREATE EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/zCreateFileSystem.sh + -name BBO.V8R5.SWLPZFS + -type ZFS + -volume hhhhhh + -storclas ssssssss + -dataclas dddddddd + -mgmtclas mmmmmmmm + -cylinders 850 100 + -mountpoint + /global/instmgr/products/WebSphere/Liberty/$LEVEL + -owner IMADMIN + -group IMGROUP /* ./ ADD NAME=BBO5CFSP //BBO5CFSP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job allocates and mounts a new HFS or zFS filesystem for * //* the WebSphere Application Server V8.5.5 Liberty runtime. (This * //* sample job requires a version of WebSphere Application Server * //* for z/OS at Fix Pack level 8.5.5 or above.) * //* * //* Ensure you execute this job from a userid that is UID=0 * //* or is permitted to the 'BPX.SUPERUSER' facility class. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) To use a different data set name for the product file system, * //* change 'BBO.V8R5.SWLPZFS' to the desired value. * //* * //* 4) To create an HFS filesystem instead of a zFS filesystem, * //* change "-type ZFS" to "-type HFS". * //* * //* 5) Set the -volume, -storclas, -dataclas, and -mgmtclas to the * //* appropriate volume and SMS storage, data, and management * //* classes for the new filesystem. Delete any allocation * //* parameters which are not needed on your system. * //* * //* 6) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which will contain the installed * //* products(s) and their Installation Manager metadata and logs. * //* You may want to include some form of the $INSTALL value in * //* the filesystem dataset name. The filesystem must be mounted * //* at this location whenever the product(s) are serviced with * //* Installation Manager. * //* * //* 7) If optional Java Software Development Kits or additional * //* products (such as IBM HTTP Server) will be added to the * //* portable install, increase the space allocation (-cylinders) + //* accordingly. * //* * //* 8) Change IMADMIN and IMGROUP to the SAF user ID and group that * //* will "own" this package group's files. This will usually be * //* the same user ID and group that own the Installation Manager * //* instance to which the package group belongs. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* The mountpoint directory, and any required directories above it, * //* will be created. Initial permissions for these directories are * //* set to 755. To alter this initial setting, specify -perm on * //* the zCreateFileSystem.sh call, followed by the desired initial * //* permissions. * //* * //********************************************************************* //* //**************************************************************** //* The following step allocates a new filesystem for the * //* WebSphere Application Server V8.5.5 Liberty runtime. * //**************************************************************** //CREATE EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/zCreateFileSystem.sh + -name BBO.V8R5.SWLPZFS + -type ZFS + -volume hhhhhh + -storclas ssssssss + -dataclas dddddddd + -mgmtclas mmmmmmmm + -cylinders 1800 100 + -mountpoint + /global/instmgr/$INSTALL + -owner IMADMIN + -group IMGROUP /* ./ ADD NAME=BBO5INS //BBO5INS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5.5 * //* Liberty runtime from the web-based prodict and service * //* repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Create an Installation Manager if you have not already * //* done so. You will need to know the path to the binaries * //* directory for the Installation Manager. * //* * //* 2. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 3. Edit and submit sample job BBO5CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) If you specify only the package name, the product will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the product to be installed. * //* * //* com.ibm.websphere.liberty.zOS.v85_8.5.200007.20200625_0300 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the path at which the product will be installed. (This * //* should match the path specified in BBO5CFS.) * //* * //* 5) Change '/global/instmgr/sharedResources' to the path for * //* the Installation Manager shared resources directory, if you * //* have chosen a different location. This value is set once * //* per Installation Manager, when the first product install is * //* performed, and cannot be changed by a later install. * //* * //* 6) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 7) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 8) This job will install all recommended interim fixes (iFixes) * //* from the web-based service repository. Change 'recommended' * //* to 'none' if you do not want iFixes to be installed. * //* * //* 9) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 10) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5.5 Liberty * //* runtime from the web-based product and service repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.liberty.zOS.v85 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL + -sharedResourcesDirectory + /global/instmgr/sharedResources + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.liberty.zOS.v85 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -installFixes recommended + -acceptLicense /* ./ ADD NAME=BBO5INSL //BBO5INSL JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5.5 * //* Liberty runtime from a local repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Create an Installation Manager if you have not already * //* done so. You will need to know the path to the binaries * //* directory for the Installation Manager. * //* * //* 2. Obtain the following base product repository file from the * //* product media, or directly from ShopzSeries: * //* * //* was.repo.8550.liberty.zOS.zip (approximately 1200 MB) * //* * //* Physical media: The file is on the z/OS Compressed * //* Repositories DVD. Transfer it in binary to your z/OS * //* system. * //* * //* ShopzSeries: Go to the Download page for your order and * //* select Additional Publications (either Download Director * //* or HTTPS). The repository you need is named cd777020.zip. * //* Download it, rename it to was.repo.8550.liberty.zOS.zip, * //* and transfer it in binary to your z/OS system. * //* * //* We recommend that you create a repo subdirectory in your * //* Installation Manager file system for repository zip files. * //* Since these files are large, you may want to create a * //* separate file system for them. You can use the Installation * //* Manager sample job GIN2REPO to create and mount this file * //* system. * //* * //* 3. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* yy.0.0.n-WS-LIBERTY-ZOS-FP.zip (approximately 300 MB) * //* * //* Keep this file in the same location as the base product * //* repository file. Make sure both files can be read by the * //* Installation Manager user ID. * //* * //* If the fix pack consists of several zip files (part1.zip, * //* part2.zip, and so on), then use an unzip tool or jar -xvf * //* to uncompress the fix pack zip files into a single empty * //* directory, and change the pointer to the singe fix pack * //* zip file (in -repositories, below) to point to the single * //* fix pack directory instead. * //* * //* 4. Edit and submit sample job BBO5CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) You can also specify a list of optional features: * //* * //* install package.id,feature,feature,... * //* * //* The optional features are described in the product Knowledge * //* Center. * //* * //* 4) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the path at which the product will be installed. (This * //* should match the path specified in BBO5CFS.) * //* * //* 5) Change '/global/instmgr/sharedResources' to the path for * //* the Installation Manager shared resources directory, if you * //* have chosen a different location. This value is set once * //* per Installation Manager, when the first product install is * //* performed, and cannot be changed by a later install. * //* * //* 6) Change '/global/instmgr/repo' to the directory that * //* contains the product repositories. Make sure all file * //* can be read by your Installation Manager user ID. * //* * //* Change the file names of the fix pack repository files to * //* match the ones you downloaded from Fix Central. * //* * //* 7) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 8) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5.5 Liberty * //* runtime from local product and service repositories. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.liberty.zOS.v85 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL + -sharedResourcesDirectory + /global/instmgr/sharedResources + -repositories + /global/instmgr/repo/was.repo.8550.liberty.zOS.zip,+ /global/instmgr/repo/yy.0.0.n-WS-LIBERTY-ZOS-FP.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -acceptLicense /* ./ ADD NAME=BBO5INSP //BBO5INSP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5.5 * //* Liberty runtime from the web-based prodict and service * //* repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 2. Edit and submit sample job BBO5CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) If you specify only the package name, the product will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the product to be installed. * //* * //* com.ibm.websphere.liberty.zOS.v85_8.5.200007.20200625_0300 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* You can also specify a list of optional features: * //* * //* install package.id,feature,feature,... * //* * //* The optional features are described in the product Knowledge * //* Center. * //* * //* 4) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which will contain the installed product * //* and its Installation Manager metata and logs. (This value * //* should match the value specified in BBO2CFSP.) * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will install all recommended interim fixes (iFixes) * //* from the web-based service repository. Change 'recommended' * //* to 'none' if you do not want iFixes to be installed. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 10) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5.5 Liberty * //* runtime from the web-based product and service repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.liberty.zOS.v85 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/wlp + -sharedResourcesDirectory + /global/instmgr/$INSTALL/.im/sharedResources + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.liberty.zOS.v85 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -accessRights group + -installFixes recommended + -acceptLicense /* ./ ADD NAME=BBO5INSQ //BBO5INSQ JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5.5 * //* Liberty runtime from a local repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Obtain the following base product repository file from the * //* product media, or directly from ShopzSeries: * //* * //* was.repo.8550.liberty.zOS.zip (approximately 1200 MB) * //* * //* Physical media: The file is on the z/OS Compressed * //* Repositories DVD. Transfer it in binary to your z/OS * //* system. * //* * //* ShopzSeries: Go to the Download page for your order and * //* select Additional Publications (either Download Director * //* or HTTPS). The repository you need is named cd777020.zip. * //* Download it, rename it to was.repo.8550.liberty.zOS.zip, * //* and transfer it in binary to your z/OS system. * //* * //* We recommend that you create a repo subdirectory in your * //* Installation Manager file system for repository zip files. * //* Since these files are large, you may want to create a * //* separate file system for them. You can use the Installation * //* Manager sample job GIN2REPO to create and mount this file * //* system. * //* * //* 2. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* yy.0.0.n-WS-LIBERTY-ZOS-FP.zip (approximately 300 MB) * //* * //* Keep this file in the same location as the base product * //* repository file. Make sure both files can be read by the * //* Installation Manager user ID. * //* * //* If the fix pack consists of several zip files (part1.zip, * //* part2.zip, and so on), then use an unzip tool or jar -xvf * //* to uncompress the fix pack zip files into a single empty * //* directory, and change the pointer to the singe fix pack * //* zip file (in -repositories, below) to point to the single * //* fix pack directory instead. * //* * //* 3. Edit and submit sample job BBO5CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) You can also specify a list of optional features: * //* * //* install package.id,feature,feature,... * //* * //* The optional features are described in the product Knowledge * //* Center. * //* * //* 4) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which will contain the installed product * //* and its Installation Manager metata and logs. (This value * //* should match the value specified in BBO5CFSP.) * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 5) Change '/global/instmgr/repo' to the directory that * //* contains the product repositories. Make sure all file * //* can be read by your Installation Manager user ID. * //* * //* Change the file names of the fix pack repository files to * //* match the ones you downloaded from Fix Central. * //* * //* 6) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 7) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5.5 Liberty * //* runtime from local product and service repositories. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.liberty.zOS.v85 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/wlp + -sharedResourcesDirectory + /global/instmgr/$INSTALL/.im/sharedResources + -repositories + /global/instmgr/repo/was.repo.8550.liberty.zOS.zip,+ /global/instmgr/repo/yy.0.0.n-WS-LIBERTY-ZOS-FP.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -accessRights group + -acceptLicense /* ./ ADD NAME=BBO5INST //BBO5INST JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * * //* _________________________________________________________________ * //* * //* This job installs the WebSphere Application Server V8.5.5 * //* Liberty runtime from the SMP/E-maintained product repository. * //* The repository mut be at Fix Pack Level 8.5.5.0 or above. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* Before running this job: * //* * //* 1. Create an Installation Manager if you have not already * //* done so. You will need to know the path to the binaries * //* directory for the Installation Manager. * //* * //* 2. Mount the SMP/E-managed product repository (BBO.SBBOIMR) * //* at /usr/lpp/InstallationManagerRepository/HBBO850. * //* This filesystem should be mounted read-only. * //* * //* 3. Edit and submit sample job BBO5CFS in SBBOJCL to create * //* and mount a filesystem for the new product install. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) You can also specify a list of optional features: * //* * //* install package.id,feature,feature,... * //* * //* The optional features are described in the product Knowledge * //* Center. * //* * //* 4) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the path at which the product will be installed. (This * //* should match the path specified in BBO5CFS.) * //* * //* 5) Change '/global/instmgr/sharedResources' to the path for * //* the Installation Manager shared resources directory, if you * //* have chosen a different location. This value is set once * //* per Installation Manager, when the first product install is * //* performed, and cannot be changed by a later install. * //* * //* 6) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 7) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the WebSphere Application Server V8.5.5 Liberty * //* runtime. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.liberty.zOS.v85 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL + -sharedResourcesDirectory + /global/instmgr/sharedResources + -repositories /usr/lpp/InstallationManagerRepository/HBBO850 + -preferences com.ibm.cic.common.core.preferences.preserveDownlo+ adedArtifacts=false + -acceptLicense /* ./ ADD NAME=BBO5UNIN //BBO5UNIN JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job uninstalls the WebSphere Application Server V8.5.5 * //* Liberty runtime with IBM Installation Manager. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server * //* Liberty product you wish to uninstall and mount its * //* filesystem (read/write) at the original install location. * //* * //* 2. Uninstall any optional Java Software Development Kits * //* which are installed on this copy of the WebSphere * //* Application Server Liberty product. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the installation directory of the copy of the product * //* to be uninstalled. The product filesystem must be mounted * //* (read/write) at this location. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //* Log and properties files may be left behind even if the * //* uninstall is successful. Delete these files before reusing * //* the filesystem for a new product install. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the WebSphere Application Server V8.5.5 Liberty * //* runtime. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + uninstall com.ibm.websphere.liberty.zOS.v85 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL /* ./ ADD NAME=BBO5UNIP //BBO5UNIP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job uninstalls the WebSphere Application Server V8.5.5 * //* Liberty runtime with IBM Installation Manager. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server * //* Liberty product you wish to uninstall and mount its * //* filesystem (read/write) at the original install location. * //* * //* 2. Uninstall any optional Java Software Development Kits * //* which are installed on this copy of the WebSphere * //* Application Server Liberty product. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product which is to * //* be uninstalled. The portable install filesystem must be * //* mounted read/write at this locatiom. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //* Log and properties files may be left behind even if the * //* uninstall is successful. Delete these files before reusing * //* the filesystem for a new product install. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the WebSphere Application Server V8.5.5 Liberty * //* runtime. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + uninstall com.ibm.websphere.liberty.zOS.v85 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/wlp + -accessRights group /* ./ ADD NAME=BBO6INS //BBO6INS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V7.1 product for use with the WebSphere Application Server V8.5 * //* full profile or DMZ Secure Proxy Server, using the web-based * //* product and service repository. * //* * //* This job can also be used to update a copy of Java V7.1 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 full profile or Secure Proxy * //* Server and the Installation Manager that was used to install it. * //* * //* NOTE: Support for the use of Java V7.x with IBM WebSphere * //* Application Server ends in July 2022. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* system). * //* * //* 2. Mount the WebSphere Application Server full profile or DMZ * //* Secure Proxy Server product file system at its original * //* install location, read/write. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) If you specify only the package name, the Java SDK will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the Java SDK to be installed. For example: * //* * //* com.ibm.websphere.IBMJAVA.v71_7.1.4045.20190801_0015 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change '/global/instmgr/products/WebSphere/AppServer/ * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 600 MB * //* or 900 cylinders (3390) of free space. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will NOT install interim fixes (iFixes) for Java. * //* Use sample jobs BBOIFIX or BBOIFIXL to install interim fixes. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V7.1 product from the web-based product and service * //* repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.IBMJAVA.v71 + -installationDirectory + /global/instmgr/products/WebSphere/AppServer/$LEVEL + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.IBMJAVA.v71 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -installFixes none + -acceptLicense /* ./ ADD NAME=BBO6INSL //BBO6INSL JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V7.1 product for use with the WebSphere Application Server V8.5 * //* full profile or DMZ Secure Proxy Server, using a local * //* repository. * //* * //* This job can also be used to update a copy of Java V7.1 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 full profile or Secure Proxy * //* Server and the Installation Manager that was used to install it. * //* * //* NOTE: Support for the use of Java V7.x with IBM WebSphere * //* Application Server ends in July 2022. * //* * //* Before running this job: * //* * //* 1. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 7.1.n.mm-WS-IBMWASJAVA-OS390.zip (approximately 720 MB) * //* * //* 2. Mount the WebSphere Application Server full profile or DMZ * //* Secure Proxy Server product file system at its original * //* install location, read/write. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/AppServer/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 600 MB * //* or 900 cylinders (3390) of free space. * //* * //* 4) Change '/global/instmgr/repo' to the directory that * //* contains the product repository. Make sure that the file * //* can be read by your Installation Manager user ID. * //* * //* Change the file name of the fix pack repository file to * //* match the ones you downloaded from Fix Central. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V7.1 product from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.IBMJAVA.v71 + -installationDirectory + /global/instmgr/products/WebSphere/AppServer/$LEVEL + -repositories + /global/instmgr/repo/7.1.n.mm-WS-IBMWASJAVA-OS390.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -acceptLicense /* ./ ADD NAME=BBO6INSP //BBO6INSP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V7.1 product for use with the WebSphere Application Server V8.5 * //* full profile or DMZ Secure Proxy Server, using the web-based * //* product and service repository. * //* * //* This job can also be used to update a copy of Java V7.1 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 full profile or Secure Proxy * //* Server and the Installation Manager that was used to install it. * //* * //* NOTE: Support for the use of Java V7.x with IBM WebSphere * //* Application Server ends in July 2022. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* system). * //* * //* 2. Mount the WebSphere Application Server full profile or DMZ * //* Secure Proxy Server product file system at its original * //* install location, read/write. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) If you specify only the package name, the Java SDK will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the Java SDK to be installed: * //* * //* com.ibm.websphere.IBMJAVA.v71_7.1.4045.20190801_0015 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product onto which the * //* Java Software Development Kit will be installed. * //* * //* The portable install filesystem must be mounted read/write * //* atr this location, and will require approximately 600 MB * //* or 900 cylinders (3390) of free space. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will NOT install interim fixes (iFixes) for Java. * //* Use sample jobs BBOIFIX or BBOIFIXL to install interim fixes. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V7.1 product from the web-based product and service * //* repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.IBMJAVA.v71 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/was + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.IBMJAVA.v71 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -accessRights group + -installFixes none + -acceptLicense /* ./ ADD NAME=BBO6INSQ //BBO6INSQ JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V7.1 product for use with the WebSphere Application Server V8.5 * //* full profile or DMZ Secure Proxy Server, using a local * //* repository. * //* * //* This job can also be used to update a copy of Java V7.1 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 full profile or Secure Proxy * //* Server and the Installation Manager that was used to install it. * //* * //* NOTE: Support for the use of Java V7.x with IBM WebSphere * //* Application Server ends in July 2022. * //* * //* Before running this job: * //* * //* 1. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 7.1.n.mm-WS-IBMWASJAVA-OS390.zip (approximately 720 MB) * //* * //* 2. Mount the WebSphere Application Server full profile or DMZ * //* Secure Proxy Server product file system at its original * //* install location, read/write. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product onto which the * //* Java Software Development Kit will be installed. * //* * //* The portable install filesystem must be mounted read/write * //* atr this location, and will require approximately 600 MB * //* or 900 cylinders (3390) of free space. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Change '/global/instmgr/repo' to the directory that * //* contains the product repository. Make sure that the file * //* can be read by your Installation Manager user ID. * //* * //* Change the file name of the fix pack repository file to * //* match the ones you downloaded from Fix Central. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V7.1 product from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.IBMJAVA.v71 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/was + -repositories + /global/instmgr/repo/7.1.n.mm-WS-IBMWASJAVA-OS390.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -accessRights group + -acceptLicense /* ./ ADD NAME=BBO6UNIN //BBO6UNIN JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job uninstalls the IBM WebSphere SDK Java Technology * //* Edition V7.1 product from a copy of the WebSphere Application * //* Server for z/OS V8.5 full profile or DMZ Secure Proxy Server. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server V8.5 * //* product from which the Java SDK is to be uninstalled, and * //* mount its product file system (read/write) at the original * //* install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/AppServer/$LEVEL' * //* level' to the installation directory of the copy of WebSphere * //* Application Server for z/OS from which the Java SDK is to be * //* uninstalled. This must be the same location at which it was * //* originally installed with IBM Installation Manager. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the IBM WebSphere SDK Java Technology Edition * //* V7.1 product from a copy of the WebSphere Application * //* Server for z/OS V8.5 full profile or Secure Proxy Server. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + uninstall com.ibm.websphere.IBMJAVA.v71 + -installationDirectory + /global/instmgr/products/WebSphere/AppServer/$LEVEL /* ./ ADD NAME=BBO6UNIP //BBO6UNIP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job uninstalls the IBM WebSphere SDK Java Technology * //* Edition V7.1 product from a copy of the WebSphere Application * //* Server for z/OS V8.5 full profile or DMZ Secure Proxy Server. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server V8.5 * //* product from which the Java SDK is to be uninstalled, and * //* mount its product file system (read/write) at the original * //* install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product from which the * //* Java Software Development Kit is to be uninstalled. The * //* portable install filesystem must be mounted read/write at * //* this location. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the IBM WebSphere SDK Java Technology Edition * //* V7.1 product from a copy of the WebSphere Application * //* Server for z/OS V8.5 full profile or Secure Proxy Server. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + uninstall com.ibm.websphere.IBMJAVA.v71 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/was + -accessRights group /* ./ ADD NAME=BBO7INS //BBO7INS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V7.1 product for use with the WebSphere Application Server for * //* z/OS V8.5.5 (or above) Liberty profile, using the web-based * //* product and service repository. * //* * //* This job can also be used to update a copy of Java V7.1 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 full profile or Secure Proxy * //* Server and the Installation Manager that was used to install it. * //* * //* NOTE: Support for the use of Java V7.x with WebSphere Liberty * //* ended in September 2019. Beginning with Fix Pack 19.0.0.9, * //* WebSphere Liberty requires Java V8.0 or later. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* system). * //* * //* 2. Mount the WebSphere Application Server Liberty product file * //* system (read/write) at its original install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) If you specify only the package name, the Java SDK will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the product to be installed: * //* * //* com.ibm.websphere.liberty.IBMJAVA.v71_7.1.4045.20190801_0015 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 600 MB * //* or 900 cylinders (3390) of free space. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will NOT install interim fixes (iFixes) for Java. * //* Use sample jobs BBOIFIX or BBOIFIXL to install interim fixes. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V7.1 product from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.liberty.IBMJAVA.v71 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.liberty.IBMJAVA.v71 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -installFixes none + -acceptLicense /* ./ ADD NAME=BBO7INSL //BBO7INSL JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V7.1 product for use with the WebSphere Application Server for * //* z/OS V8.5.5 (or above) Liberty profile, using a local * //* repository. * //* * //* This job can also be used to update a copy of Java V7.1 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 Liberty profile and the * //* Installation Manager that was used to install it. * //* * //* NOTE: Support for the use of Java V7.x with WebSphere Liberty * //* ended in September 2019. Beginning with Fix Pack 19.0.0.9, * //* WebSphere Liberty requires Java V8.0 or later. * //* * //* Before running this job: * //* * //* 1. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 7.1.n.mm-WS-IBMWASJAVA-OS390.zip (approximately 720 MB) * //* * //* 2. Mount the WebSphere Application Server Liberty product file * //* system (read/write) at its original install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 600 MB * //* or 900 cylinders (3390) of free space. * //* * //* 4) Change '/global/instmgr/repo' to the directory that * //* contains the product repository. Make sure that the file * //* can be read by your Installation Manager user ID. * //* * //* Change the file name of the fix pack repository file to * //* match the ones you downloaded from Fix Central. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V7.1 product from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.liberty.IBMJAVA.v71 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL + -repositories + /global/instmgr/repo/7.1.n.mm-WS-IBMWASJAVA-OS390.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -acceptLicense /* ./ ADD NAME=BBO7UNIN //BBO7UNIN JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job uninstalls the IBM WebSphere SDK Java Technology * //* Edition V7.1 product from a copy of the WebSphere Application * //* Server for z/OS V8.5.5 (or above) Liberty profile. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server V8.5 * //* product from which the Java SDK is to be uninstalled, and * //* mount its product file system (read/write) at the original * //* install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the installation directory of the copy of WebSphere * //* Application Server for z/OS from which the product is to be * //* uninstalled. This must be the same location at which it was * //* originally installed with IBM Installation Manager. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the IBM WebSphere SDK Java Technology Edition * //* V7.1 product from a copy of the WebSphere Application * //* Server for z/OS V8.5.5 (or above) Liberty profile. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + uninstall com.ibm.websphere.liberty.IBMJAVA.v71 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL /* ./ ADD NAME=BBO8INS //BBO8INS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V8.0 product for use with the WebSphere Application Server V8.5 * //* full profile or DMZ Secure Proxy Server, using the web-based * //* product and service repository. * //* * //* This job can also be used to update a copy of Java V8.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 full profile or Secure Proxy * //* Server and the Installation Manager that was used to install it. * //* * //* NOTE: The com.ibm.websphere.IBMJAVA.v80 offering installed by * //* this job is now deprecated, and no fix packs or interim fixes * //* will be provided for it after March 2020. If you have this * //* offering installed, consider switching your nodes and servers * //* to use the built-in Java 8.0, then uninstall this offering * //* once it is no longer needed. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 2. Mount the WebSphere ApplicationServer full profile or DMZ * //* Secure Proxy Server product file system at its original * //* install location, read/write. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) If you specify only the package name, the Java SDK will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the Java SDK to be installed: * //* * //* com.ibm.websphere.IBMJAVA.v80_8.0.5037.20190801_0015 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change '/global/instmgr/products/WebSphere/AppServer/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 1100 MB * //* or 1400 cylinders (3390) of free space. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will NOT install interim fixes (iFixes) for Java. * //* Use sample jobs BBOIFIX or BBOIFIXL to install interim fixes. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V8.0 product from the web-based product and service * //* repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.IBMJAVA.v80 + -installationDirectory + /global/instmgr/products/WebSphere/AppServer/$LEVEL + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.IBMJAVA.v80 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -installFixes none + -acceptLicense /* ./ ADD NAME=BBO8INSL //BBO8INSL JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V8.0 product for use with the WebSphere Application Server V8.5 * //* full profile or DMZ Secure Proxy Server, using a local * //* repository. * //* * //* This job can also be used to update a copy of Java V8.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 full profile or Secure Proxy * //* Server and the Installation Manager that was used to install it. * //* * //* NOTE: The com.ibm.websphere.IBMJAVA.v80 offering installed by * //* this job is now deprecated, and no fix packs or interim fixes * //* will be provided for it after March 2020. If you have this * //* offering installed, consider switching your nodes and servers * //* to use the built-in Java 8.0, then uninstall this offering * //* once it is no longer needed. * //* * //* Before running this job: * //* * //* 1. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 8.0.n.mm-WS-IBMWASJAVA-OS390.zip (approximately 720 MB) * //* * //* 2. Mount the WebSphere Application Server full profile or DMZ * //* Secure Proxy Server product file system at its original * //* install location, read/write. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/AppServer/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 1100 MB * //* or 1400 cylinders (3390) of free space. * //* * //* 4) Change '/global/instmgr/repo' to the directory that * //* contains the product repository. Make sure that the file * //* can be read by your Installation Manager user ID. * //* * //* Change the file name of the fix pack repository file to * //* match the ones you downloaded from Fix Central. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V8.0 product from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.IBMJAVA.v80 + -installationDirectory + /global/instmgr/products/WebSphere/AppServer/$LEVEL + -repositories + /global/instmgr/repo/8.0.n.mm-WS-IBMWASJAVA-OS390.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -acceptLicense /* ./ ADD NAME=BBO8INSP //BBO8INSP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V8.0 product for use with the WebSphere Application Server V8.5 * //* full profile or DMZ Secure Proxy Server, using the web-based * //* product and service repository. * //* * //* This job can also be used to update a copy of Java V8.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 full profile or Secure Proxy * //* Server and the Installation Manager that was used to install it. * //* * //* NOTE: The com.ibm.websphere.IBMJAVA.v80 offering installed by * //* this job is now deprecated, and no fix packs or interim fixes * //* will be provided for it after March 2020. If you have this * //* offering installed, consider switching your nodes and servers * //* to use the built-in Java 8.0, then uninstall this offering * //* once it is no longer needed. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 2. Mount the WebSphere ApplicationServer full profile or DMZ * //* Secure Proxy Server product file system at its original * //* install location, read/write. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) If you specify only the package name, the Java SDK will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the Java SDK to be installed: * //* * //* com.ibm.websphere.IBMJAVA.v80_8.0.5037.20190801_0015 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product onto which the * //* Java Software Development Kit will be installed. * //* * //* The portable install filesystem must be mounted read/write * //* atr this location, and will require approximately 600 MB * //* or 900 cylinders (3390) of free space. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will NOT install interim fixes (iFixes) for Java. * //* Use sample jobs BBOIFIX or BBOIFIXL to install interim fixes. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V8.0 product from the web-based product and service * //* repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.IBMJAVA.v80 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/was + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.IBMJAVA.v80 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -accessRights group + -installFixes none + -acceptLicense /* ./ ADD NAME=BBO8INSQ //BBO8INSQ JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V8.0 product for use with the WebSphere Application Server V8.5 * //* full profile or DMZ Secure Proxy Server, using a local * //* repository. * //* * //* This job can also be used to update a copy of Java V8.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 full profile or Secure Proxy * //* Server and the Installation Manager that was used to install it. * //* * //* NOTE: The com.ibm.websphere.IBMJAVA.v80 offering installed by * //* this job is now deprecated, and no fix packs or interim fixes * //* will be provided for it after March 2020. If you have this * //* offering installed, consider switching your nodes and servers * //* to use the built-in Java 8.0, then uninstall this offering * //* once it is no longer needed. * //* * //* Before running this job: * //* * //* 1. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 8.0.n.mm-WS-IBMWASJAVA-OS390.zip (approximately 720 MB) * //* * //* 2. Mount the WebSphere Application Server full profile or DMZ * //* Secure Proxy Server product file system at its original * //* install location, read/write. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product onto which the * //* Java Software Development Kit will be installed. * //* * //* The portable install filesystem must be mounted read/write * //* atr this location, and will require approximately 600 MB * //* or 900 cylinders (3390) of free space. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Change '/global/instmgr/repo' to the directory that * //* contains the product repository. Make sure that the file * //* can be read by your Installation Manager user ID. * //* * //* Change the file name of the fix pack repository file to * //* match the ones you downloaded from Fix Central. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V8.0 product from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.IBMJAVA.v80 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/was + -repositories + /global/instmgr/repo/8.0.n.mm-WS-IBMWASJAVA-OS390.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -accessRights group + -acceptLicense /* ./ ADD NAME=BBO8UNIN //BBO8UNIN JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBJA700 * //* _________________________________________________________________ * //* * //* This job uninstalls the IBM WebSphere SDK Java Technology * //* Edition V8.0 product from a copy of the WebSphere Application * //* Server for z/OS V8.5 full profile or DMZ Secure POrxy Server. * //* * //* NOTE: This job uninstalls the OPTIONAL Java 8.0, not the Java * //* Java 8.0 which is always installed into the /java64 directory * //* as part of WebSphere Application Server Pack 8.5.5.14 and * //* later. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server V8.5 * //* product from which the Java SDK is to be uninstalled, and * //* mount its product file system (read/write) at the original * //* install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/AppServer/$LEVEL' * //* to the installation directory of the copy of WebSphere * //* Application Server for z/OS from which the Java SDK is to be * //* uninstalled. This must be the same location at which it was * //* originally installed with IBM Installation Manager. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the IBM WebSphere SDK Java Technology Edition * //* V8.0 product from a copy of the WebSphere Application * //* Server for z/OS V8.5 full profile or Secure Proxy Server. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + uninstall com.ibm.websphere.IBMJAVA.v80 + -installationDirectory + /global/instmgr/products/WebSphere/AppServer/$LEVEL /* ./ ADD NAME=BBO8UNIP //BBO8UNIP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBJA700 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job uninstalls the IBM WebSphere SDK Java Technology * //* Edition V8.0 product from a copy of the WebSphere Application * //* Server for z/OS V8.5 full profile or DMZ Secure POrxy Server. * //* * //* NOTE: This job uninstalls the OPTIONAL Java 8.0, not the Java * //* Java 8.0 which is always installed into the /java64 directory * //* as part of WebSphere Application Server Pack 8.5.5.14 and * //* later. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server V8.5 * //* product from which the Java SDK is to be uninstalled, and * //* mount its product file system (read/write) at the original * //* install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product from which the * //* Java Software Development Kit is to be uninstaled. The * //* portable install filesystem must be mounted read/write at * //* this location. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the IBM WebSphere SDK Java Technology Edition * //* V8.0 product from a copy of the WebSphere Application * //* Server for z/OS V8.5 full profile or Secure Proxy Server. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + uninstall com.ibm.websphere.IBMJAVA.v80 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/was + -accessRights group /* ./ ADD NAME=BBO9INS //BBO9INS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V8.0 product for use with the WebSphere Application Server for * //* z/OS V8.5.5 (or above) Liberty profile, using the web-based * //* product and service repository. * //* * //* This job can also be used to update a copy of Java V8.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 Liberty profile and the * //* Installation Manager that was used to install it. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 2. Mount the WebSphere Application Server Liberty product file * //* system (read/write) at its original install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) If you specify only the package name, the Java SDK will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the Java SDK to be installed: * //* * //* com.ibm.websphere.liberty.IBMJAVA.v80_8.0.5037.20190801_0015 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 1100 MB * //* or 1400 cylinders (3390) of free space. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will NOT install interim fixes (iFixes) for Java. * //* Use sample jobs BBOIFIX or BBOIFIXL to install interim fixes. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V8.0 product from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.liberty.IBMJAVA.v80 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.liberty.IBMJAVA.v80 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -installFixes none + -acceptLicense /* ./ ADD NAME=BBO9INSL //BBO9INSL JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V8.0 product for use with the WebSphere Application Server for * //* z/OS V8.5.5 (or above) Liberty profile, using a local * //* repository. * //* * //* This job can also be used to update a copy of Java V8.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 Liberty profile and the * //* Installation Manager that was used to install it. * //* * //* Before running this job: * //* * //* 1. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 8.0.n.mm-WS-IBMWASJAVA-OS390.zip (approximately 720 MB) * //* * //* 2. Mount the WebSphere Application Server Liberty product file * //* system (read/write) at its original install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 1100 MB * //* or 1400 cylinders (3390) of free space. * //* * //* 4) Change '/global/instmgr/repo' to the directory that * //* contains the product repository. Make sure that the file * //* can be read by your Installation Manager user ID. * //* * //* Change the file name of the fix pack repository file to * //* match the ones you downloaded from Fix Central. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V8.0 product from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.liberty.IBMJAVA.v80 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL + -repositories + /global/instmgr/repo/8.0.n.mm-WS-IBMWASJAVA-OS390.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -acceptLicense /* ./ ADD NAME=BBO9INSP //BBO9INSP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V8.0 product for use with the WebSphere Application Server for * //* z/OS V8.5.5 (or above) Liberty profile, using the web-based * //* product and service repository. * //* * //* This job can also be used to update a copy of Java V8.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 Liberty profile and the * //* Installation Manager that was used to install it. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 2. Mount the WebSphere Application Server Liberty product file * //* system (read/write) at its original install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) If you specify only the package name, the Java SDK will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the Java SDK to be installed: * //* * //* com.ibm.websphere.liberty.IBMJAVA.v80_8.0.5037.20190801_0015 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product onto which the * //* Java Software Development Kit will be installed. * //* * //* The portable install filesystem must be mounted read/write * //* atr this location, and will require approximately 1100 MB * //* or 1400 cylinders (3390) of free space. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will NOT install interim fixes (iFixes) for Java. * //* Use sample jobs BBOIFIX or BBOIFIXL to install interim fixes. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V8.0 product from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.liberty.IBMJAVA.v80 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/wlp + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.liberty.IBMJAVA.v80 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -accessRights group + -installFixes none + -acceptLicense /* ./ ADD NAME=BBO9INSQ //BBO9INSQ JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V8.0 product for use with the WebSphere Application Server for * //* z/OS V8.5.5 (or above) Liberty profile, using a local * //* repository. * //* * //* This job can also be used to update a copy of Java V8.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 Liberty profile and the * //* Installation Manager that was used to install it. * //* * //* Before running this job: * //* * //* 1. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 8.0.n.mm-WS-IBMWASJAVA-OS390.zip (approximately 720 MB) * //* * //* 2. Mount the WebSphere Application Server Liberty product file * //* system (read/write) at its original install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product onto which the * //* Java Software Development Kit will be installed. * //* * //* The portable install filesystem must be mounted read/write * //* atr this location, and will require approximately 1100 MB * //* or 1400 cylinders (3390) of free space. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Change '/global/instmgr/repo' to the directory that * //* contains the product repository. Make sure that the file * //* can be read by your Installation Manager user ID. * //* * //* Change the file name of the fix pack repository file to * //* match the ones you downloaded from Fix Central. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V8.0 product from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.liberty.IBMJAVA.v80 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/wlp + -repositories + /global/instmgr/repo/8.0.n.mm-WS-IBMWASJAVA-OS390.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -accessRights group + -acceptLicense /* ./ ADD NAME=BBO9UNIN //BBO9UNIN JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job uninstalls the IBM WebSphere SDK Java Technology * //* Edition V8.0 product from a copy of the WebSphere Application * //* Server for z/OS V8.5.5 (or above) Liberty profile. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server V8.5 * //* product from which the Java SDK is to be uninstalled, and * //* mount its product file system (read/write) at the original * //* install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the installation directory of the copy of WebSphere * //* Application Server for z/OS from which the Java SDK is to be * //* uninstalled. This must be the same location at which it was * //* originally installed with IBM Installation Manager. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the IBM WebSphere SDK Java Technology Edition * //* V8.0 product from a copy of the WebSphere Application * //* Server for z/OS V8.5.5 (or above) Liberty profile. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + uninstall com.ibm.websphere.liberty.IBMJAVA.v80 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL /* ./ ADD NAME=BBO9UNIP //BBO9UNIP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job uninstalls the IBM WebSphere SDK Java Technology * //* Edition V8.0 product from a copy of the WebSphere Application * //* Server for z/OS V8.5.5 (or above) Liberty profile. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server V8.5 * //* product from which the Java SDK is to be uninstalled, and * //* mount its product file system (read/write) at the original * //* install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product from which the * //* Java Software Development Kit is to be uninstaled. The * //* portable install filesystem must be mounted read/write at * //* this location. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the IBM WebSphere SDK Java Technology Edition * //* V8.0 product from a copy of the WebSphere Application * //* Server for z/OS V8.5.5 (or above) Liberty profile. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + uninstall com.ibm.websphere.liberty.IBMJAVA.v80 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/wlp + -accessRights group /* ./ ADD NAME=BJA1INS //BJA1INS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBJA700 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V7.0 product for use with the WebSphere Application Server V8.5 * //* full profile or DMZ Secure Proxy Server, using the web-based * //* product and service repository. * //* * //* This job can also be used to update a copy of Java V7.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 full profile or Secure Proxy * //* Server and the Installation Manager that was used to install it. * //* * //* NOTE: Support for the use of Java V7.x with IBM WebSphere * //* Application Server ends in July 2022. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 2. Mount the WebSphere Application Server full profile or DMZ * //* Secure Proxy Server product file system at its original * //* install location, read/write. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) If you specify only the package name, the Java SDK will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the Java SDK to be installed: * //* * //* com.ibm.websphere.IBMJAVA.v70_7.0.10045.20190801_0005 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change '/global/instmgr/products/WebSphere/AppServer/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 600 MB * //* or 900 cylinders (3390) of free space. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will NOT install interim fixes (iFixes) for Java. * //* Use sample jobs BBOIFIX or BBOIFIXL to install interim fixes. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V7.0 product from the web-based product and service * //* repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.IBMJAVA.v70 + -installationDirectory + /global/instmgr/products/WebSphere/AppServer/$LEVEL + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.IBMJAVA.v70 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -installFixes none + -acceptLicense /* ./ ADD NAME=BJA1INSL //BJA1INSL JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBJA700 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V7.0 product for use with the WebSphere Application Server V8.5 * //* full profile or DMZ Secure Proxy Server, using a local * //* repository. * //* * //* This job can also be used to update a copy of Java V7.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 full profile or Secure Proxy * //* Server and the Installation Manager that was used to install it. * //* * //* NOTE: Support for the use of Java V7.x with IBM WebSphere * //* Application Server ends in July 2022. * //* * //* Before running this job: * //* * //* 1. Obtain the following base product repository file from the * //* product media, or directly from ShopzSeries: * //* * //* was.repo.8550.java7.zip (approximately 610 MB) * //* * //* Physical media: The file is on the z/OS Compressed * //* Repositories DVD for Java 7. Transfer it in binary to * //* your z/OS system. * //* * //* ShopzSeries: Go to the Download page for your order and * //* select Additional Publications (either Download Director * //* or HTTPS). The repository you need is named cd777190.zip. * //* Download it, rename it to was.repo.8550.java7.zip, and * //* transfer it in binary to your z/OS system. * //* * //* We recommend that you create a repo subdirectory in your * //* Installation Manager file system for repository zip files. * //* Since these files are large, you may want to create a * //* separate file system for them. You can use the Installation * //* Manager sample job GIN2REPO to create and mount this file * //* system. * //* * //* 2. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 7.0.n.mm-WS-IBMWASJAVA-OS390.zip (approximately 720 MB) * //* * //* Keep this file in the same location as the base product * //* repository file. Make sure both files can be read by the * //* Installation Manager user ID. * //* * //* 3. Mount the WebSphere Application Server full profile or DMZ * //* Secure Proxy Server product file system at its original * //* install location, read/write. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/AppServer/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 600 MB * //* or 900 cylinders (3390) of free space. * //* * //* 4) Change '/global/instmgr/repo' to the directory that * //* contains the product repository. Make sure that the file * //* can be read by your Installation Manager user ID. * //* * //* Change the file name of the fix pack repository file to * //* match the ones you downloaded from Fix Central. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V7.0 product from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.IBMJAVA.v70 + -installationDirectory + /global/instmgr/products/WebSphere/AppServer/$LEVEL + -repositories + /global/instmgr/repo/was.repo.8550.java7.zip,+ /global/instmgr/repo/7.0.n.mm-WS-IBMWASJAVA-OS390.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -acceptLicense /* ./ ADD NAME=BJA1INSP //BJA1INSP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBJA700 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V7.0 product for use with the WebSphere Application Server V8.5 * //* full profile or DMZ Secure Proxy Server, using the web-based * //* product and service repository. * //* * //* This job can also be used to update a copy of Java V7.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 full profile or Secure Proxy * //* Server and the Installation Manager that was used to install it. * //* * //* NOTE: Support for the use of Java V7.x with IBM WebSphere * //* Application Server ends in July 2022. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 2. Mount the WebSphere Application Server full profile or DMZ * //* Secure Proxy Server product file system at its original * //* install location, read/write. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) If you specify only the package name, the Java SDK will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the Java SDK to be installed: * //* * //* com.ibm.websphere.IBMJAVA.v70_7.0.10045.20190801_0005 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product onto which the * //* Java Software Development Kit will be installed. * //* * //* The portable install filesystem must be mounted read/write * //* atr this location, and will require approximately 600 MB * //* or 900 cylinders (3390) of free space. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will NOT install interim fixes (iFixes) for Java. * //* Use sample jobs BBOIFIX or BBOIFIXL to install interim fixes. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V7.0 product from the web-based product and service * //* repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.IBMJAVA.v70 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/was + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.IBMJAVA.v70 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -accessRights group + -installFixes none + -acceptLicense /* ./ ADD NAME=BJA1INSQ //BJA1INSQ JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBJA700 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V7.0 product for use with the WebSphere Application Server V8.5 * //* full profile or DMZ Secure Proxy Server, using a local * //* repository. * //* * //* This job can also be used to update a copy of Java V7.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 full profile or Secure Proxy * //* Server and the Installation Manager that was used to install it. * //* * //* NOTE: Support for the use of Java V7.x with IBM WebSphere * //* Application Server ends in July 2022. * //* * //* Before running this job: * //* * //* 1. Obtain the following base product repository file from the * //* product media, or directly from ShopzSeries: * //* * //* was.repo.8550.java7.zip (approximately 610 MB) * //* * //* Physical media: The file is on the z/OS Compressed * //* Repositories DVD for Java 7. Transfer it in binary to * //* your z/OS system. * //* * //* ShopzSeries: Go to the Download page for your order and * //* select Additional Publications (either Download Director * //* or HTTPS). The repository you need is named cd777190.zip. * //* Download it, rename it to was.repo.8550.java7.zip, and * //* transfer it in binary to your z/OS system. * //* * //* We recommend that you create a repo subdirectory in your * //* Installation Manager file system for repository zip files. * //* Since these files are large, you may want to create a * //* separate file system for them. You can use the Installation * //* Manager sample job GIN2REPO to create and mount this file * //* system. * //* * //* 2. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 7.0.n.mm-WS-IBMWASJAVA-OS390.zip (approximately 720 MB) * //* * //* Keep this file in the same location as the base product * //* repository file. Make sure both files can be read by the * //* Installation Manager user ID. * //* * //* 3. Mount the WebSphere Application Server full profile or DMZ * //* Secure Proxy Server product file system at its original * //* install location, read/write. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product onto which the * //* Java Software Development Kit will be installed. * //* * //* The portable install filesystem must be mounted read/write * //* atr this location, and will require approximately 600 MB * //* or 900 cylinders (3390) of free space. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Change '/global/instmgr/repo' to the directory that * //* contains the product repository. Make sure that the file * //* can be read by your Installation Manager user ID. * //* * //* Change the file name of the fix pack repository file to * //* match the ones you downloaded from Fix Central. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V7.0 product from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.websphere.IBMJAVA.v70 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/was + -repositories + /global/instmgr/repo/was.repo.8550.java7.zip,+ /global/instmgr/repo/7.0.n.mm-WS-IBMWASJAVA-OS390.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -accessRights group + -acceptLicense /* ./ ADD NAME=BJA1INST //BJA1INST JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBJA700 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V7.0 product for use with the WebSphere Application Server V8.5 * //* full profile or DMZ Secure Proxy Server, using the SMP/E-managed * //* repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of WebSphere * //* Application Server for z/OS V8.5 full profile or DMZ Secure * //* Proxy Server, and the Installation Manager that was used to * //* install it. * //* * //* NOTE: Support for the use of Java V7.x with IBM WebSphere * //* Application Server ends in July 2022. * //* * //* Before running this job: * //* * //* 1. Mount the SMP/E-managed product repository (BJA.SBJAIMR) * //* at /usr/lpp/InstallationManagerRepository/HBJA700. * //* This filesystem should be mounted read-only. * //* * //* 2. Mount the WebSphere Application Server full profile or DMZ * //* Secure Proxy Server file system at is original install * //* location, read/write. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/AppServer/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 600 MB * //* or 900 cylinders (3390) of free space. * //* * //* 4) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 5) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* product. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.IBMJAVA.v70 + -installationDirectory + /global/instmgr/products/WebSphere/AppServer/$LEVEL + -repositories /usr/lpp/InstallationManagerRepository/HBJA700 + -preferences com.ibm.cic.common.core.preferences.preserveDownlo+ adedArtifacts=false + -acceptLicense /* ./ ADD NAME=BJA1UNIN //BJA1UNIN JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBJA700 * //* _________________________________________________________________ * //* * //* This job uninstalls the IBM WebSphere SDK Java Technology * //* Edition V7.0 product from a copy of the WebSphere Application * //* Server for z/OS V8.5 full profile or DMZ Secure Proxy Server. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server V8.5 * //* product from which the Java SDK is to be uninstalled, and * //* mount its product file system (read/write) at the original * //* install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/AppServer/$LEVEL' * //* to the installation directory of the copy of WebSphere * //* Application Server for z/OS from which the Java SDK is to b * //* uninstalled. This must be the same location at which it was * //* originally installed with IBM Installation Manager. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the IBM WebSphere SDK Java Technology Edition * //* product. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + uninstall com.ibm.websphere.IBMJAVA.v70 + -installationDirectory + /global/instmgr/products/WebSphere/AppServer/$LEVEL /* ./ ADD NAME=BJA1UNIP //BJA1UNIP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBJA700 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD106438 * //* _________________________________________________________________ * //* * //* This job uninstalls the IBM WebSphere SDK Java Technology * //* Edition V7.0 product from a copy of the WebSphere Application * //* Server for z/OS V8.5 full profile or DMZ Secure Proxy Server. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server V8.5 * //* product from which the Java SDK is to be uninstalled, and * //* mount its product file system (read/write) at the original * //* install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product from which the * //* Java Software Development Kit is to be uninstaled. The * //* portable install filesystem must be mounted read/write at * //* this location. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the IBM WebSphere SDK Java Technology Edition * //* product. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + uninstall com.ibm.websphere.IBMJAVA.v70 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/was + -accessRights group /* ./ ADD NAME=BJA3INS //BJA3INS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBJA700 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V7.0 product for use with the WebSphere Application Server for * //* z/OS V8.5.5 (or above) Liberty profile, using the web-based * //* product and service repository. * //* * //* This job can also be used to update a copy of Java V7.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 full profile or Secure Proxy * //* Server and the Installation Manager that was used to install it. * //* * //* NOTE: Support for the use of Java V7.x with WebSphere Liberty * //* ended in September 2019. Beginning with Fix Pack 19.0.0.9, * //* WebSphere Liberty requires Java V8.0 or later. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* system). * //* * //* 2. Mount the WebSphere Application Server Liberty product file * //* system (read/write) at its original install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) If you specify only the package name, the Java SDK will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the product to be installed: * //* * //* om.ibm.websphere.liberty.IBMJAVA.v70_7.0.10045.20190801_0005 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change '/global/instmgr/products/WebSphere/AppServer/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 600 MB * //* or 900 cylinders (3390) of free space. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will NOT install interim fixes (iFixes) for Java. * //* Use sample jobs BBOIFIX or BBOIFIXL to install interim fixes. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V7.0 product from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.liberty.IBMJAVA.v70 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.websphere.liberty.IBMJAVA.v70 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -installFixes none + -acceptLicense /* ./ ADD NAME=BJA3INSL //BJA3INSL JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBJA700 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V7.0 product for use with the WebSphere Application Server for * //* z/OS V8.5.5 (or above) Liberty profile, using a local * //* repository. * //* * //* This job can also be used to update a copy of Java V7.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5 Liberty profile and the * //* Installation Manager that was used to install it. * //* * //* NOTE: Support for the use of Java V7.x with WebSphere Liberty * //* ended in September 2019. Beginning with Fix Pack 19.0.0.9, * //* WebSphere Liberty requires Java V8.0 or later. * //* * //* Before running this job: * //* * //* 1. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* 7.0.n.mm-WS-IBMWASJAVA-OS390.zip (approximately 720 MB) * //* * //* 2. Mount the WebSphere Application Server Liberty product file * //* system (read/write) at its original install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 600 MB * //* or 900 cylinders (3390) of free space. * //* * //* 4) Change '/global/instmgr/repo' to the directory that * //* contains the product repository. Make sure that the file * //* can be read by your Installation Manager user ID. * //* * //* Change the file name of the fix pack repository file to * //* match the ones you downloaded from Fix Central. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V7.0 product from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.liberty.IBMJAVA.v70 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL + -repositories + /global/instmgr/repo/7.0.n.mm-WS-IBMWASJAVA-OS390.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -acceptLicense /* ./ ADD NAME=BJA3INST //BJA3INST JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBJA700 * //* _________________________________________________________________ * //* * //* This job installs the IBM WebSphere SDK Java Technology Edition * //* V7.0 product for use with the WebSphere Application Server V8.5 * //* Liberty profile, using the SMP/E-managed repository. * //* * //* This job can also be used to update a copy of the product to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server for z/OS V8.5.5 Liberty runtime, and the * //* Installation Manager that was used to install it. * //* * //* NOTE: Support for the use of Java V7.x with WebSphere Liberty * //* ended in September 2019. Beginning with Fix Pack 19.0.0.9, * //* WebSphere Liberty requires Java V8.0 or later. * //* * //* Before running this job: * //* * //* 1. Mount the SMP/E-managed product repository (BJA.SBJAIMR) * //* at /usr/lpp/InstallationManagerRepository/HBJA700. * //* This filesystem should be mounted read-only. * //* * //* 2. Mount the WebSphere Application Server Liberty product * //* file system at its original install location, read/write. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 600 MB * //* or 900 cylinders (3390) of free space. * //* * //* 4) The license text for this product can be found in the lafiles * //* dirctory in the root of the product repository. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 5) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* If additional Installation Manager parameters are needed (such * //* as a -keyring value for a secure repository), these can be * //* added after the other parameters. Use a plus sign (+) as a * //* continuation character if necessary. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition V7.0 * //* product for use with the WebSphere Application Server * //* for z/OS Version 8.5.5 Liberty runtime. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.websphere.liberty.IBMJAVA.v70 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL + -sharedResourcesDirectory /global/instmgr/sharedResources + -repositories /usr/lpp/InstallationManagerRepository/HBJA700 + -preferences com.ibm.cic.common.core.preferences.preserveDownlo+ adedArtifacts=false + -acceptLicense /* ./ ADD NAME=BJA3UNIN //BJA3UNIN JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5655-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBJA700 * //* _________________________________________________________________ * //* * //* This job uninstalls the IBM WebSphere SDK Java Technology * //* Edition V7.0 product from a copy of the WebSphere Application * //* Server for z/OS V8.5 Liberty profile. * //* * //* Before running this job: * //* * //* 1. Identify the copy of the WebSphere Application Server V8.5 * //* product from which the Java SDK is to be uninstalled, and * //* mount its product file system (read/write) at the original * //* install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the installation directory of the copy of WebSphere * //* Application Server for z/OS from which the Java SDK is to be * //* uninstalled. This must be the same location at which it was * //* originally installed with IBM Installation Manager. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall the IBM WebSphere SDK Java Technology Edition * //* product from the WebSphere Application Server for z/OS * //* Version 8.5.5 Liberty runtime. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + uninstall com.ibm.websphere.liberty.IBMJAVA.v70 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL /* ./ ADD NAME=BJA4INS //BJA4INS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5665-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs IBM SDK, Java Technology Edition, Version 8 * //* from the Web-based product repository onto an installed copy * //* of WebSphere Application Server Liberty. * //* * //* This job can also be used to update a copy of Java V8.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server Liberty product and the Installation * //* Manager that was used to install it. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 2. Mount the WebSphere Application Server Liberty product file * //* system (read/write) at its original install location. * //* * //* The Liberty filesystem will require at least 500 MB of * //* free space to install IBM SDK, Java Technology Edition, * //* Version 8. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) If you specify only the package name, the Java SDK will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the Java SDK to be installed. For example: * //* * //* install com.ibm.java.jdk.v8_8.0.5037.20190620_0641 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 1100 MB * //* or 1400 cylinders (3390) of free space. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will NOT install interim fixes (iFixes) for Java. * //* Use sample jobs BBOIFIX or BBOIFIXL to install interim fixes. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V8.0 product from the web-based product and service * //* repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.java.jdk.v8 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.java.jdk.v8 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -installFixes none + -acceptLicense /* ./ ADD NAME=BJA4INSL //BJA4INSL JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5665-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs IBM SDK, Java Technology Edition, Version 8 * //* from a local product repository onto an installed copy of * //* WebSphere Application Server Liberty. * //* * //* This job can also be used to update a copy of Java V8.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server Liberty product and the Installation * //* Manager that was used to install it. * //* * //* Before running this job: * //* * //* 1. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* ibm-java-sdk-8.0-n.mm-zos-s390x-installmgr.zip * //* (approximately 420 MB) * //* * //* We recommend that you create a repo subdirectory in your * //* Installation Manager file system for repository zip files. * //* Since these files are large, you may want to create a * //* separate file system for them. You can use the Installation * //* Manager sample job GIN2REPO to create and mount this file * //* system. * //* * //* 2. Mount the WebSphere Application Server Liberty product file * //* system (read/write) at its original install location. * //* * //* The Liberty filesystem will require at least 500 MB of * //* free space to install IBM SDK, Java Technology Edition, * //* Version 8. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 500 MB * //* or 600 cylinders (3390) of free space. * //* * //* 4) Change '/global/instmgr/repo' to the directory that * //* contains the product repository. Make sure that the file * //* can be read by your Installation Manager user ID. * //* * //* Change the file name of the fix pack repository file to * //* match the one you downloaded from Fix Central. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V8.0 product from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.java.jdk.v8 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL + -repositories + /global/instmgr/repo/+ ibm-java-sdk-8.0-n.mm-zos-s390x-installmgr.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -acceptLicense /* ./ ADD NAME=BJA4INSP //BJA4INSP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5665-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD1064388 * //* _________________________________________________________________ * //* * //* This job installs IBM SDK, Java Technology Edition, Version 8 * //* from the Web-based product repository onto an installed copy * //* of WebSphere Application Server Liberty. * //* * //* This job can also be used to update a copy of Java V8.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server Liberty product and the Installation * //* Manager that was used to install it. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 2. Mount the WebSphere Application Server Liberty product file * //* system (read/write) at its original install location. * //* * //* The Liberty filesystem will require at least 500 MB of * //* free space to install IBM SDK, Java Technology Edition, * //* Version 8. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) If you specify only the package name, the Java SDK will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the Java SDK to be installed. For example: * //* * //* install com.ibm.java.jdk.v8_8.0.5037.20190620_0641 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product onto which the * //* Java Software Development Kit will be installed. * //* * //* The portable install filesystem must be mounted read/write * //* atr this location, and will require approximately 500 MB * //* or 600 cylinders (3390) of free space. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will NOT install interim fixes (iFixes) for Java. * //* Use sample jobs BBOIFIX or BBOIFIXL to install interim fixes. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V8.0 product from the web-based product and service * //* repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.java.jdk.v8 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/wlp + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.java.jdk.v8 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -accessRights group + -installFixes none + -acceptLicense /* ./ ADD NAME=BJA4INSQ //BJA4INSQ JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5665-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD1064388 * //* _________________________________________________________________ * //* * //* This job installs IBM SDK, Java Technology Edition, Version 8 * //* from a local product repository onto an installed copy of * //* WebSphere Application Server Liberty. * //* * //* This job can also be used to update a copy of Java V8.0 to the * //* latest fix pack level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server Liberty product and the Installation * //* Manager that was used to install it. * //* * //* Before running this job: * //* * //* 1. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* ibm-java-sdk-8.0-n.mm-zos-s390x-installmgr.zip * //* (approximately 420 MB) * //* * //* We recommend that you create a repo subdirectory in your * //* Installation Manager file system for repository zip files. * //* Since these files are large, you may want to create a * //* separate file system for them. You can use the Installation * //* Manager sample job GIN2REPO to create and mount this file * //* system. * //* * //* 2. Mount the WebSphere Application Server Liberty product file * //* system (read/write) at its original install location. * //* * //* The Liberty filesystem will require at least 500 MB of * //* free space to install IBM SDK, Java Technology Edition, * //* Version 8. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) If you specify only the package name, the Java SDK will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the product to be installed. For example: * //* * //* install com.ibm.java.jdk.v8_8.0.5037.20190620_0641 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product onto which the * //* Java Software Development Kit will be installed. * //* * //* The portable install filesystem must be mounted read/write * //* atr this location, and will require approximately 500 MB * //* or 600 cylinders (3390) of free space. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 5) Change '/global/instmgr/repo' to the directory that * //* contains the product repository. Make sure that the file * //* can be read by your Installation Manager user ID. * //* * //* Change the file name of the fix pack repository file to * //* match the one you downloaded from Fix Central. * //* * //* 6) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 7) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install the IBM WebSphere SDK Java Technology Edition * //* V8.0 product from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.java.jdk.v8 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/wlp + -repositories + /global/instmgr/repo/+ ibm-java-sdk-8.0-n.mm-zos-s390x-installmgr.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -accessRights group + -acceptLicense /* ./ ADD NAME=BJA4UNIN //BJA4UNIN JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5665-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job uninstalls IBM SDK, Java Technology Edition, Version 8 * //* from an installed copy of WebSphere Application Server Liberty. * //* * //* Before running this job: * //* * //* 1. Identify the copy of WebSphere Application Server Liberty * //* from which you want to remove the Java SDK and mount it * //* (read/write) at its original install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the installation directory of the copy of WebSphere * //* Application Server for z/OS from which the Java SDK is to be * //* uninstalled. This must be the same location at which it was * //* originally installed with IBM Installation Manager. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall IBM SDK, Java Technology Edition, Version 8 * //* from a copy of WebSphere Application Server Liberty. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + uninstall com.ibm.java.jdk.v8 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL /* ./ ADD NAME=BJA4UNIP //BJA4UNIP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5665-W65 (C) Copyright IBM Corp. 2000, 2020 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD1064388 * //* _________________________________________________________________ * //* * //* This job uninstalls IBM SDK, Java Technology Edition, Version 8 * //* from an installed copy of WebSphere Application Server Liberty. * //* * //* Before running this job: * //* * //* 1. Identify the copy of WebSphere Application Server Liberty * //* from which you want to remove the Java SDK and mount it * //* (read/write) at its original install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product from which the * //* Java Software Development Kit is to be uninstalled. The * //* portable install filesystem must be mounted read/write at * //* this location. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall IBM SDK, Java Technology Edition, Version 8 * //* from a copy of WebSphere Application Server Liberty. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + uninstall com.ibm.java.jdk.v8 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/wlp + -accessRights group /* ./ ADD NAME=BJA5INS //BJA5INS JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5665-W65 (C) Copyright IBM Corp. 2000, 2022 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * * //* This job installs IBM Semeru Runtime Certified Edition for z/OS, * //* Version 11 from the web-based product repository onto an * //* installed copy of WebSphere Application Server Liberty. * //* * //* This job can also be used to update a copy of IBM Semeru Runtime * //* Certified Edition for z/OS, Version 11 to the latest fix pack * //* level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server Liberty product and the Installation * //* Manager that was used to install it. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 2. Mount the WebSphere Application Server Liberty product file * //* system (read/write) at its original install location. * //* * //* The Liberty filesystem will require at least 500 MB of * //* free space to install IBM Semeru Runtime Certified Edition * //* for z/OS, Version 11. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) If you specify only the package name, the Java SDK will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the Java SDK to be installed. For example: * //* * //* com.ibm.java.jdk.v11_11.0.1601.20220914_1032 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 1100 MB * //* or 1400 cylinders (3390) of free space. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will NOT install interim fixes (iFixes) for Java. * //* Use sample jobs BBOIFIX or BBOIFIXL to install interim fixes. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install IBM Semeru Runtime Certified Edition for z/OS, * //* Version 11 from the web-based product and service * //* repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.java.jdk.v11 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.java.jdk.v11 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -installFixes none + -acceptLicense /* ./ ADD NAME=BJA5INSL //BJA5INSL JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5665-W65 (C) Copyright IBM Corp. 2000, 2022 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job installs IBM Semeru Runtime Certified Edition for z/OS, * //* Version 11 from a local product repository onto an installed * //* copy of WebSphere Application Server Liberty. * //* * //* This job can also be used to update a copy of IBM Semeru Runtime * //* Certified Edition for z/OS, Version 11 to the latest fix pack * //* level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server Liberty product and the Installation * //* Manager that was used to install it. * //* * //* Before running this job: * //* * //* 1. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* ibm-semeru-certified-jdk_s390x_zos_11.0.mm.n-installmgr.zip * //* (approximately 351 MB) * //* * //* We recommend that you create a repo subdirectory in your * //* Installation Manager file system for repository zip files. * //* Since these files are large, you may want to create a * //* separate file system for them. You can use the Installation * //* Manager sample job GIN2REPO to create and mount this file * //* system. * //* * //* 2. Mount the WebSphere Application Server Liberty product file * //* system (read/write) at its original install location. * //* * //* The Liberty filesystem will require at least 500 MB of * //* free space to install IBM Semeru Runtime Certified Edition * //* for z/OS, Version 11. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the installation directory for the copy of the WebSphere * //* Application Server product to which the Java SDK is to be * //* added. The product file system must be mounted read/write * //* at this mountpoint, and will require approximately 500 MB * //* or 600 cylinders (3390) of free space. * //* * //* 4) Change '/global/instmgr/repo' to the directory that * //* contains the product repository. Make sure that the file * //* can be read by your Installation Manager user ID. * //* * //* Change the file name of the fix pack repository file to * //* match the one you downloaded from Fix Central. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; e.g. * //* * //* /global/instmgr/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install IBM Semeru Runtime Certified Edition for z/OS, * //* Version 11 from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + install com.ibm.java.jdk.v11 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL + -repositories + /global/instmgr/repo/+ ibm-semeru-certified-jdk_s390x_zos_11.0.mm.n-installmgr.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -acceptLicense /* ./ ADD NAME=BJA5INSP //BJA5INSP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5665-W65 (C) Copyright IBM Corp. 2000, 2022 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD1064388 * //* _________________________________________________________________ * //* * //* This job installs IBM Semeru Runtime Certified Edition for z/OS, * //* Version 11 from the web-based product repository onto an * //* installed copy of WebSphere Application Server Liberty. * //* * //* This job can also be used to update a copy of IBM Semeru Runtime * //* Certified Edition for z/OS, Version 11 to the latest fix pack * //* level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server Liberty product and the Installation * //* Manager that was used to install it. * //* * //* Before running this job: * //* * //* 1. Edit and submit sample job GIN3CRED or BBO1CRED to create * //* a credentials file containing your IBM user ID and password * //* (along with proxy server credentials if you use a proxy * //* proxy server to access the internet from your z/OS system.) * //* * //* 2. Mount the WebSphere Application Server Liberty product file * //* system (read/write) at its original install location. * //* * //* The Liberty filesystem will require at least 500 MB of * //* free space to install IBM Semeru Runtime Certified Edition * //* for z/OS, Version 11. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) If you specify only the package name, the Java SDK will be * //* installed at the latest level contained in the repository or * //* repositories. You can also specify the particular level of * //* the Java SDK to be installed. For example: * //* * //* com.ibm.java.jdk.v11_11.0.1601.20220914_1032 * //* * //* Use the Installation Manager command listAvailablePackages * //* to display the available product levels. * //* * //* 4) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product onto which the * //* Java Software Development Kit will be installed. * //* * //* The portable install filesystem must be mounted read/write * //* atr this location, and will require approximately 500 MB * //* or 600 cylinders (3390) of free space. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 5) If you need to use a proxy server to access the Internet, * //* change 'proxy.hostname' and 'proxy_port' to the host name * //* and port for your proxy server. Your Installation Manager * //* credentials file must also contain any required credentials * //* to access the proxy server; see sample job GIN3CRED. * //* * //* If you do NOT need to use a proxy server to access the * //* Internet, delete the five lines following the line that * //* begins with '-preferences'. Do not delete the '-preferences' * //* line or the line containing the text 'preserveDownloaded'. * //* * //* 6) Change '$HOME/im.ssf' to the path and file name of the * //* credentials file you created with GIN3CRED. * //* * //* Change '$HOME/im.mpw' to the path and file name of your * //* master password file. * //* * //* Both files must be readable by the user ID under which this * //* job is run. * //* * //* 7) This job will NOT install interim fixes (iFixes) for Java. * //* Use sample jobs BBOIFIX or BBOIFIXL to install interim fixes. * //* * //* 8) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 9) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install IBM Semeru Runtime Certified Edition for z/OS, * //* Version 11 from the web-based product and service * //* repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.java.jdk.v8 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/wlp + -repositories http://www.ibm.com/software/repositorymanager/+ com.ibm.java.jdk.v8 + -preferences + com.ibm.cic.common.core.preferences.http.proxyEnabled=True,+ com.ibm.cic.common.core.preferences.http.proxyHost=+ proxy.hostname,+ com.ibm.cic.common.core.preferences.http.proxyPort=+ proxy_port,+ com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -secureStorageFile $HOME/im.ssf + -masterPasswordFile $HOME/im.mpw + -accessRights group + -installFixes none + -acceptLicense /* ./ ADD NAME=BJA5INSQ //BJA5INSQ JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5665-W65 (C) Copyright IBM Corp. 2000, 2022 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD1064388 * //* _________________________________________________________________ * //* * //* This job installs IBM Semeru Runtime Certified Edition for z/OS, * //* Version 11 from a local product repository onto an installed * //* copy of WebSphere Application Server Liberty. * //* * //* This job can also be used to update a copy of IBM Semeru Runtime * //* Certified Edition for z/OS, Version 11 to the latest fix pack * //* level in the repository. * //* * //* You must have access to an installed copy of the WebSphere * //* Application Server Liberty product and the Installation * //* Manager that was used to install it. * //* * //* Before running this job: * //* * //* 1. Download the latest fix pack repository file from IBM Fix * //* Central (http://www.ibm.com/support/fixcentral) and * //* transfer it in binary to your z/OS system: * //* * //* ibm-semeru-certified-jdk_s390x_zos_11.0.mm.n-installmgr.zip * //* (approximately 351 MB) * //* * //* We recommend that you create a repo subdirectory in your * //* Installation Manager file system for repository zip files. * //* Since these files are large, you may want to create a * //* separate file system for them. You can use the Installation * //* Manager sample job GIN2REPO to create and mount this file * //* system. * //* * //* 2. Mount the WebSphere Application Server Liberty product file * //* system (read/write) at its original install location. * //* * //* The Liberty filesystem will require at least 500 MB of * //* free space to install IBM SDK, Java Technology Edition, * //* Version 8. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product onto which the * //* Java Software Development Kit will be installed. * //* * //* The portable install filesystem must be mounted read/write * //* atr this location, and will require approximately 500 MB * //* or 600 cylinders (3390) of free space. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Change '/global/instmgr/repo' to the directory that * //* contains the product repository. Make sure that the file * //* can be read by your Installation Manager user ID. * //* * //* Change the file name of the fix pack repository file to * //* match the one you downloaded from Fix Central. * //* * //* 5) The license text for this product can be found in the lafiles * //* directory in the root of the product repository. You can * //* also display the license with the imcl viewLicense command. * //* * //* By including -acceptLicense in the command you submit below, * //* you are indicating that you accept the terms of the license. * //* You must accept the license in order to install and use the * //* software. * //* * //* 6) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* product installation was successful. * //* * //* Logs for product installation can be found in the logs * //* subdirectory of the Installation Manager run-time data; * //* * //* /global/instmgr/$INSTALL/.im/appdata/logs * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* install IBM Semeru Runtime Certified Edition for z/OS, * //* Version 11 from a local repository. * //**************************************************************** //INSTALL EXEC PGM=IKJEFT01,REGION=0M,MEMLIMIT=NOLIMIT //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + install com.ibm.java.jdk.v11 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/wlp + -repositories + /global/instmgr/repo/+ ibm-semeru-certified-jdk_s390x_zos_11.0.mm.n-installmgr.zip + -preferences + com.ibm.cic.common.core.preferences.preserveDownloaded+ Artifacts=false + -accessRights group + -acceptLicense /* ./ ADD NAME=BJA5UNIN //BJA5UNIN JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5665-W65 (C) Copyright IBM Corp. 2000, 2022 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job uninstalls IBM Semeru Runtime Certified Edition for * //* z/OS, Version 11 from an installed copy of WebSphere Application * //* Server Liberty. * //* * //* Before running this job: * //* * //* 1. Identify the copy of WebSphere Application Server Liberty * //* from which you want to remove the Java SDK and mount it * //* (read/write) at its original install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/global/instmgr/bin' to the path for the Installation * //* Manager binaries, if you have chosen a different location. * //* * //* 3) Change '/global/instmgr/products/WebSphere/Liberty/$LEVEL' * //* to the installation directory of the copy of WebSphere * //* Application Server for z/OS from which the Java SDK is to be * //* uninstalled. This must be the same location at which it was * //* originally installed with IBM Installation Manager. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall IBM Semeru Runtime Certified Edition for z/OS, * //* Version 11 from a copy of WebSphere Application Server * //* Liberty. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /global/instmgr/bin/eclipse/tools/imcl + uninstall com.ibm.java.jdk.v11 + -installationDirectory + /global/instmgr/products/WebSphere/Liberty/$LEVEL /* ./ ADD NAME=BJA5UNIP //BJA5UNIP JOB //********************************************************************* //* Licensed Material - Property of IBM * //* 5665-W65 (C) Copyright IBM Corp. 2000, 2022 * //* * //* All Rights Reserved. * //* U.S. Government users - RESTRICTED RIGHTS - Use, Duplication, or * //* Disclosure restricted by GSA-ADP schedule contract with IBM Corp. * //* * //* Status = HBBO850 * //* _________________________________________________________________ * //* * //* This job is intended for use with "portable" IBM Installation * //* Manager product installs, which contain their own Installation * //* Manager metadata and can be moved easily to other z/OS systems. * //* For more information, see the following IBM technote: * //* * //* www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD1064388 * //* _________________________________________________________________ * //* * //* This job uninstalls IBM Semeru Runtime Certified Edition for z/OS, * //* Version 11 from an installed copy of WebSphere Application * //* Server Liberty. * //* * //* Before running this job: * //* * //* 1. Identify the copy of WebSphere Application Server Liberty * //* from which you want to remove the Java SDK and mount it * //* (read/write) at its original install location. * //* * //* CAUTION: This is neither a JCL procedure nor a complete job. * //* Before using this job step, you will have to make the following * //* modifications: * //* * //* 1) Add the job parameters to meet your system requirements. * //* Make sure the job will run under a user ID with access to * //* the appropriate group and privileges, and a read/write * //* home directory. (See Installation Manager sample job * //* GIN2ADMN for a description of the required privileges.) * //* * //* For an admin-mode Installation Manager, run this job under a * //* superuser (uid 0) ID. * //* * //* For a user-mode Installation Manager, run this job under the * //* user ID that owns the Installation Manager. * //* * //* For a group-mode Installation Manager, run this job under a * //* user ID connected to the group that owns the Installation * //* Manager. If this group is not the default group for the user * //* ID, specify the GROUP= parameter on the JOB statement to * //* cause the job to run under the Installation Manager group. * //* * //* 2) Change '/usr/lpp/InstallationManager/V1R4' to the path for * //* the Installation Manager product code (installer). * //* * //* 3) Change $INSTALL to the portable install name, the directory * //* in /global/instmgr which contains the product from which the * //* Java Software Development Kit is to be uninstalled. The * //* portable install filesystem must be mounted read/write at * //* this location. * //* * //* Note that $INSTALL must be changed in several places. * //* * //* 4) Make sure that each line of the //SYSTSIN input stream ends * //* with the continuation character (+) except for the last line, * //* which should not end with a continuation character. * //* * //* Submit the job, and examine the output to make sure that the * //* uninstallation was successful. * //* * //********************************************************************* //* //**************************************************************** //* The following step invokes IBM Installation Manager to * //* uninstall IBM Semeru Runtime Certified Edition for z/OS, * //* Version 11 from a copy of WebSphere Application Server * //* Liberty. * //**************************************************************** //UNINST EXEC PGM=IKJEFT01,REGION=0M //SYSTSPRT DD SYSOUT=* //BPXOUT DD SYSOUT=* //STDOUT DD SYSOUT=* //SYSTSIN DD * BPXBATCH SH + /usr/lpp/InstallationManager/V1R4/tools/imcl + uninstall com.ibm.java.jdk.v11 + -dataLocation + /global/instmgr/$INSTALL/.im/appdata + -installationDirectory + /global/instmgr/$INSTALL/wlp + -accessRights group /* $$ /*