QRadar_1U_M3_MT7944_Qflow_15xxEC_2100_2_2

Dynamic System Analysis (DSA) Preboot Change History

Version 9.53, Build ID DSYTC5F
o New System Support:
o New Operating System support:
o New server options support:
o Problem(s) Fixed:
o Enhancement:
o Limitations:
    Refer to readme
o Functional change:
o Dependencies:
o Special usage:
  - IMMv1 system 2012 4Q-LFC

===============================================================================

IBM Online SAS/SATA HDD/SSD Update Program.
 Version 1.22.01  Build ID: IBM12201
**************************************************************************
  IBM SAS/SATA HDD/SSD Update Program
  Version 1.22.01
   - Update Utility release for IBM x86 servers.

   Delete below drives in supported list.

   	IBM-ESXSST3300657SS			BA5A
	IBM-ESXSST3450857SS			BA5A
	IBM-ESXSST3600057SS			BA5A

***********************************************************

===============================================================================
Integrated Management Module (IMM) Firmware Update
Change History

IMPORTANT: Prerequisite for updating to IMM firmware version 1.30 (yuooc7e)
========== Updating to IMM firmware version 1.30 (yuooc7e) requires the current
IMM firmware version to be 1.10 (yuoo57h), or later. If this prerequisite is not
met before updating to version 1.30 (yuooc7e) the system will not power on
correctly. If the system is not running a minimum of IMM version 1.10 (yuoo57h),
update the IMM before attempting to update to 1.30 (yuooc7e).
This prerequisite was a limitation of IMM version 1.30, and it has been fixed
in IMM version 1.31(yuooc7f). This prerequisite does not apply to IMM version 1.31
or later.

IMPORTANT: Please DO NOT apply the firmware update (yuoo91e, v1.24)
========= if you are using AEM functions in x3620M3 or x3630M3. The
v1.24 firmware will disable the power capping functionality in those two
systems. Please remain on the current IMM version or update the firmware
to v1.25 or newer. Users not using AEM functions can still update to v1.24.


===============================================================================

***********************************************************

ServeRAID M5000 Series SAS/SATA Controller Firmware Update

Adapters Supported: ServeRAID M5015 SAS/SATA Controller (46M0829)
		    ServeRAID M5014 SAS/SATA Controller (46M0916)
		    ServeRAID M5025 SAS/SATA Controller (46M0830)

NOTE TO SERVICE - Reference RETAIN #N/A

Version 12.15.0-0248 - Moderate Impact/Low Probability of Occurrence
---------------------
MR Firmware:  2.130.403-6221,
BIOS:  3.30.02.2_4.16.08.00_0x06060A05007/23/2014
,
HII:  03.07.12.04,

Fixes:
- Fixed an issue where CLI command set securitykey=Lsi@12345" failed with error code "1001" and error message "invalid key". (SCGCQ00553069)
- Fixed an issue where drive speed in WebBIOS was showing as unknown. (SCGCQ00751036)
- Fixed an issue where WebBIOS and MSM were displaying different sizes for total capacity property for the same drive group.  (SCGCQ00752176)
- Fixed an issue where foreign configuration holding data structure was getting corrupted while importing number of vds greater than the supported count of 31. (SCGCQ00931011 Port of Defect SCGCQ00927528)
- Fixed an issue where Firmware hits assertion while booting with 4K PDs. (SCGCQ00944388 Port of Defect SCGCQ00927547)

===============================================================================

Enhancement(s):
- Changed the battery status text in BIOS from "missing" to "N/A" for iMR solutions. (SCGCQ00690943)

***********************************************************


                   uEFI Flash Update
             Version 1.22 (BuildID D6E164A)
                     Change History

Version 1.22 - BuildID: D6E164A - Critical
-------------------------------------------------
    Problem(s) Fixed:
      -  Updated microcode to address security vulnerabilities CVE-2018-3639 and CVE-2018-3640 for Intel Xeon 55xx and 56xx series processors
    Enhancements:
    Limitations:
    Dependencies:

    ===============================================================================