Readme file for IBM(R) TRIRIGA(R) CAD Integrator/Publisher 12.0.2.1 fix pack. Date: December 18, 2014 IBM Corporation Copyright(C) International Business Machines Corporation 2014. All rights reserved. US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. =============================================================================================== Table of Contents =============================================================================================== 1. Introduction 2. Information resources 3. Prerequisites and supported products 4. Pre-Installation considerations 5. Installation instructions 6. Resolved issues 7. Notices =============================================================================================== 1. Introduction =============================================================================================== This fix pack updates the IBM TRIRIGA CAD Integrator/Publisher product. ----------------------------------------------------------------------------------------------- Prerequisites and supported products ----------------------------------------------------------------------------------------------- To install this fix pack, you must already have TRIRIGA CAD Integrator/Publisher 12.0.2.0 installed. =============================================================================================== 2. Information Resources =============================================================================================== Knowledge Center URL: http://www-01.ibm.com/support/knowledgecenter/SSFCZ3_10.3.2/com.ibm.tri.doc_10.3.2/ci_cadint/t_ctr_int_pub_rep_cad.html Description: Access the Knowledge center to view the product documentation. Topics include product overviews; installation and configuration tasks; instructions for using, administering, and troubleshooting the product; and security information. Real Estate and Facilities Management community on Service Management Connect URL: https://www.ibm.com/developerworks/servicemanagement/rfm/ Description: Use Service Management Connect to access blogs, wikis, forums, and communities. In Service Management Connect you can review information such as best practices, performance and tuning, and product integrations. You can also collaborate with IBM experts and the broader user community. IBM TRIRIGA Application Platform support resources portal URL: http://www.ibm.com/support/entry/portal/overview/software/tivoli/ibm_tririga_application_platform Description: The IBM support resources portal provides access to tools and resources to keep your systems, software, and applications running smoothly. From the support resources portal you can find fixes, service requests, useful links and an enhanced search to help you find information quickly. =============================================================================================== 3. Prerequisites and supported products =============================================================================================== To install this fix pack, you must already have TRIRIGA CAD Integrator/Publisher 12.0.2.0 installed. ================================================================================= 4. Pre-Installation Considerations ================================================================================= Before installation begins, the following prerequisites must be met: The workstations to upgrade must have a supported version of TRIRIGA CAD Integrator/Publisher software installed. The workstations to upgrade must have version 10 or a previous installation of version 12 installed. All drawings that were attached with version 10 of TRIRIGA CAD Integrator/Publisher must be backed up. =============================================================================================== 5. Installation instructions =============================================================================================== Follow these steps to install this fix pack: 1 Double-click the fixpack_ci_v12.0.2.1.exe file, and run the installation. 2 In the Introduction window, click Next. 3 Accept the license agreement terms and conditions. Click Next. 4 Specify the directory where the 12.0.2 installation of IBM TRIRIGA CAD Integrator/Publisher is installed, for example, C:\Program Files\IBM\TRIRIGA\CI-12... 5 Review the information in the Pre-Installation Summary dialog, and click Next. 6 In the IBM TRIRIGA CAD Integrator/Publisher Confirmation dialog, click Install. 7 In the Installation complete dialog, click Done to complete the fix pack installation. The TRIRIGA CAD Integrator/Publisher JARS and DLLS are updated with the latest version. Third-party libraries are not updated. To test the installation of the fix pack, open AutoCAD, or Bently MicroStation. In the About dialog box, ensure that the version is now 12.0.2.1. ==================================================================================================== 6. Resolved issues ==================================================================================================== ---------------------------------------------------------------------------------------------------- General Notes ---------------------------------------------------------------------------------------------------- ----- ----- --- Defect 147057 requires an upgrade to the IBM TRIRIGA Application Platform version 3.3.2.3.. Other fixes that are included in the fix pack are compatible with an earlier version when you connect to a 3.3.1.x platform application. --- ----- ----- ---------------------------------------------------------------------------------------------------- The following issues were resolved in this fix pack. ---------------------------------------------------------------------------------------------------- ----- ----- --- APAR #: IV52348 Defect: 134642 Description: When you synchronize, publish, or change the label style, TRIRIGA CAD Integrator/Publisher labels now maintain their justification. --- APAR #: IV56620 Defect: 134648 Description: A performance issue that occurred when you detached a space in a drawing with many spaces and many attached items is resolved. --- APAR #: IV61530 Defect: 138424 Description: You apply hatches and they are opened in attached polylines or complex regions. TRIRIGA CAD Integrator/Publisher was updated to support hatching complex regions for AutoCAD 2013 and AutoCAD 2014. AutoCAD 2013 and 2014 include full support which, due to limitations in AutoCAD, includes full support for normal polylines and circles but only partial support for complex regions with arcs or ellipsis. Due to limitations in AutoCAD 2012, complex regions are not supported. TRIRIGA CAD Integrator/Publisher does not support hatching open polylines but the presence of these entities or complex regions in AutoCAD 2012 no longer causes normal boundaries to fail to hatch. --- APAR #: IV62526 Defect: 141738, 146933 Description: When blocks are detached, MicroStation now removes blocks that were originally inserted. --- APAR #: IV63152 Defect: 146932 Description: A MicroStation design with large Element IDs failed to upload areas when you use the attach gross, attach measured gross, attach objects commands. This issue was resolved. --- APAR #: IV63235 Defect: 147057 Description: TRIRIGA now correctly displays attachments for upgraded legacy TRIRIGA CAD Integrator/Publisher 10 drawings. Drawings now display as attachments in the Open Drawing from Record dialog and the various attachment dialogs in TRIRIGA CAD Integrator/Publisher. The Drawing Upgrade process now automatically runs a full synchronization with TRIRIGA and the message that is displayed during the upgrade was updated. --- Defect: 156896 Description: When you connect the 12.0.2.1 fix pack to a 3.3.2.3 or later server, the issue where a drawing does not move the gross and measured gross layers from a CI-10 upgraded drawing to the correct layers during sync or before publishing is resolved. This defect caused issues with the graphics display. --- Defect: 146931 Description: When a drawing is not attached, TRIRIGA CAD Integrator/Publisher now disables the Attach Object, Insert Object, and Find Object commands. --- Defect: 150594 Description: TRIRIGA CAD Integrator/Publisher now works with entities on locked layers. --- Defect: 147099 Description: Some drawings with incorrect entity data from TRIRIGA CAD Integrator/Publisher 10 did not upgrade correctly. TRIRIGA CAD Integrator/Publisher no longer processes the incorrect data and completes the upgrade process. --- Defect: 134637 Description: The Drawing Properties menu item was incorrectly set to active for an unattached design file. This issue was resolved. --- Defect: 134640 Description: When there was more than one result in the TRIRIGA CAD Integrator/Publisher legend box, a color alignment issue occurred. This issue was resolved. Additionally, the color graphic now includes a border on all sides. --- Defect: 148982 Description: The presence of any 3D polylines in uploaded layers caused the upload scan to fail. This issue was resolved. --- Defect: 134641 Description: When the URL of the environment for the logged in user ended with a backslash, the Launch Portal command, Edit command, Edit record menu action, Create Record menu action, and Create Child Record menu action did not work. This issue was resolved. --- Defect: 150599 Description: When you attached a cell that included elements on different levels in MicroStation, an issue occurred that caused all elements to move to the attached layer. This issue was resolved. Now, when the cell is detached, TRIRIGA CAD Integrator/Publisher changes only the main MicroStation layer and restores the other layers. --- Defect: 134639 Description: When you detach a space in MicroStation, child block elements are unlinked. --- Defect: 134635 Description: When you detach a drawing, all drawing data is now removed from the legend. --- Defect: 146927 Description: Attach Gross and Attach Measured Gross functions now display a message when you cancel a command, rather than logging an error in the log. ----- ----- --- ==================================================================================================== 7. Notices ==================================================================================================== This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the users responsibility to evaluate and verify the operation of any non-IBM product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to: IBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY 10504-1785 U.S.A. For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to: Intellectual Property Licensing Legal and Intellectual Property Law IBM Japan, Ltd. 19-21, Nihonbashi-Hakozakicho, Chuo-ku Tokyo 103-8510, Japan The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact: IBM Corporation 2Z4A/101 11400 Burnet Road Austin, TX 78758 U.S.A. Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee. The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us. Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products. All statements regarding IBMs future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only. This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. If you are viewing this information softcopy, the photographs and color illustrations may not appear. Trademarks IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at www.ibm.com/legal/copytrade.shtml. Java and all Java-based trademarks and logos are trademarks of Oracle and/or its affiliates. Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both. Privacy Policy Considerations IBM Software products, including software as service solutions, (Software Offerings) may use cookies or other technologies to collect product usage information, to help improve the end user experience, to tailor interactions with the end user or for other purposes. In many cases no personally identifiable information is collected by the Software Offerings. Some of our Software Offerings can help enable you to collect personally identifiable information. If this Software Offering uses cookies to collect personally identifiable information, specific information about this offerings use of cookies is set forth below. This Software Offering does not use cookies or other technologies to collect personally identifiable information. If the configurations deployed for this Software Offering provide you as customer the ability to collect personally identifiable information from end users via cookies and other technologies, you should seek your own legal advice about any laws applicable to such data collection, including any requirements for notice and consent. For more information about the use of various technologies, including cookies, for these purposes, see IBMs Privacy Policy at www.ibm.com/privacy and IBMs Online Privacy Statement at www.ibm.com/privacy/details in the section entitled Cookies, Web Beacons and Other Technologies and the IBM Software Products and Software-as-a-Service Privacy Statement at www.ibm.com/software/info/product-privacy/.