Product Documentation
Abstract
System service parts for the IBM VXA-320 Tape Autoloader.
Content
Notes:
- Field Replacement Units (FRU) that are identified in the CRU column by 1 or 2 are Customer Replaceable Units.
-
Each FRU is available for all types or model, unless specific types or models are specified.
-
A CRU (Customer Replaceable Units) is identified 1 or 2 in the CRU ID column. 1 means that the part is a Tier 1 CRU; 2 means that the part is a Tier 2 CRU. An N in the CRU ID column means that the part is not a CRU.
-
Tier 1 CRU:
- No tools required.
- A coin or a thumb screw is acceptable.
- Minimal technical expertise is required.
- Minimal problem determination is required-less than five minutes.
-
Tier 2 CRU:
- Up to 4 screws or fasteners have to be removed.
- Some technical experience is required.
- IBM Support Center assistance may be used.
- Problem determination can be done by customer, either on site or with IBM Support Center assistance.
-
Tier 1 CRU:
| Description | Replacement part number | CRU |
|---|---|---|
| Tape drive | ||
| (All models) | 39M5640 | 2 |
| Base | ||
| (All models) | 40K2556 | 1 |
| Rail kit | ||
| Rack (All models) | 42C3911 | 1 |
| Terminator | ||
| SCSI2 LVD/SE (All models) | 23R5841 | 1 |
| SCSI cable | ||
| 4.2 m 68-pin (All models) | 01K6484 | 1 |
| Jumper cord | ||
| (All models) | 39M5378 | 1 |
| Power cord | ||
| 125 V US-CN (All models) | 39M5081 | 1 |
| Power cord (All models) | 36L8861 | 1 |
| 2.8 m 125 V (All models) | 6952300 | 1 |
| Terminator | ||
| LVD (All models) | 35L0145 | 1 |
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU01XBU","label":"System x Hardware Options->Tape Autoloader->Tape Autoloader VXA-320->87691VX"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5071003