IBM Support

SCSI backplane removal and installation - IBM eServer xSeries 340, Netfinity 4500R

Product Documentation


Abstract

1. Screw 2. SCSI Backplane Removing the hot-swap hard disk drive backplane Remove the cover and bezel. Disconnect cables. Remove the screw (1) from the top of the assembly. Gently slide the SCSI backplane assembly (2) up to remove.

Content

removing the scsi backplane assembly

1. Screw
2. SCSI Backplane

Removing the hot-swap hard disk drive backplane
  1. Remove the cover and bezel.
  2. Disconnect cables.
  3. Remove the screw (1) from the top of the assembly.
  4. Gently slide the SCSI backplane assembly (2) up to remove.

Document Location

Worldwide

Operating System

Older System x:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW18M","label":"Older System x->xSeries 340"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HWN13","label":"Older System x->Netfinity 4500R"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
24 January 2019

UID

ibm1MIGR-45582

Page Feedback