Preventive Service Planning
Abstract
Configuration Information for Oracle StorageTek SL150 Modular Tape Library System
Content
Model
|
Drive Addresses
|
Storage Slot Addresses
|
Changer Address
|
Entry/Exit Slot Address
|
Base system
|
500
|
1000
|
0
|
10
|
1. Tape Library configurations for base model and with 14 expansion modules
- 2 Half-Height (HH) LTO drives per base module
- 30 HH LTO drives per full stack
- Up to 14 expansion modules
- 30 slots per base module, 30 slots per expansion module, 450 slots per full stack
- 4 mail slots per base module
- Optional expanded mail slot configuration: 19-cartridge capacity
- 3U per module to a maximum of 31U
2. Barcodes are required
3. Eight-character barcodes are required. The last 2 characters must be the media identifier "L#" where # is the tape cartridge generation. For example, ABC456L8 for an LTO-8 cartridge. Without a proper barcode label, a volume will appear as "unknown media"
4. ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE command is supported
5. Oracle StorageTek SL150 supports mixed generation LTO drives in the same partition
6. Oracle StorageTek SL150 is available with the following SAS and Fibre Channel drives:
- HPE ULTIRUM 5-SCSI
- HPE ULTRIUM 6-SCSI
- IBM ULTRIUM-HH6
- IBM ULTRIUM-HH7
- IBM ULTRIUM-HH8
- IBM ULTRIUM-HH9
- LTO-7 support requires IBM Spectrum Protect Server 7.1.4 or later
- LTO-8 support requires IBM Spectrum Protect Server 8.1.4 or later
- LTO-9 support requires IBM Spectrum Protect Server 8.1.14.100 or late
More information regarding device configuration is available in the IBM Spectrum Protect Server Documentation
Was this topic helpful?
Document Information
Modified date:
06 November 2022
UID
swg21598187