News
Abstract
This document lists the firmware stacks that have been tested for the InfoSphere Balanced Warehouse E7100 for AIX.
Content
The following firmware stacks were tested on the InfoSphere Balanced Warehouse E7100 hardware with their corresponding software stacks. You may apply firmware versions that are newer than the tested firmware versions, but it is recommended that you do so only for a good reason, for example because the newer level contains a fix for a problem that affects your system. Be sure to check any new firmware readme file for compatibility concerns. If you must deviate from a tested stack, consult the FAQ about software and firmware upgrades.
E7100 Balanced Warehouse Tested Firmware Stack (2011/01/24)
Firmware stack | E7100 Hardware | E7100 Firmware |
Power 570 | 9117-MMA | 3.5.5 (350_085) |
HMC | 7042-CR4 | V7 R7.1.0 SP2 with mandatory efixes MH01214, MH01226, and MH01230 |
HBA | 10N7255 | 271315 |
DS4800 Storage Controller | 1815-84A | 7.60.40.00 -- (1) |
DS4000 EXP810 Expansion Unit | 1812-81A | |
DS ESM and HDD Firmware Bundle | 1.71 (98D6) | |
DS4000 Storage Manager | 10.70 | |
10/100/1000 Base-TX Ethernet PCI-X Adapter | 5706 | DV0210 |
(1) -- If you update to this storage controller firmware level, you must use MPIO as the multipath driver because this firmware level does not support RDAC. |
E7100 Balanced Warehouse Tested Firmware Stack (2009/12/21)
Firmware stack | E7100 Hardware | E7100 Firmware |
Power 570 | 9117-MMA | EM340_041 |
HMC (1) | 7042-CR4 | V7 R3.5.0 with efix MH01195 |
HBA (2) | 10N7255 | 271315 |
DS4800 Storage Controller (3) | 1815-84A | v07.50.13.00 |
DS4000 EXP810 Expansion Unit | 1812-81A | |
DS ESM and HDD Firmware Bundle | v1.62 | |
DS4000 Storage Manager | v10.60 | |
Notes: 1. The new HMC level replaces the older tested level, which was V7 R3.4.0 with efix MH01152. 2. The new HBA level replaces the older tested level, which was 271102. Upgrading the level to 271315 is recommended to fix a critical error. With the previously recommended level, the firmware sometimes reports a false error that causes the device driver to take the adapter off-line with instructions to replace the adapter. 3. If your DS4800 storage controller is at v06.xx, you must update it to v07.36.17.00 before you can update it to v07.50.13.00. |
E7100 Balanced Warehouse Tested Firmware Stack (2008/06/30)
E7100 Balanced Warehouse Tested Firmware Stack (2007/11/30)
Related Information
Product Synonym
InfoSphere Balanced Warehouse;Balanced Warehouse;Balanced Configuration Unit (BCU)
Was this topic helpful?
Document Information
Modified date:
16 June 2018
UID
swg21289471