Product Documentation
Abstract
Instructions for installing the Air baffle/Cover - IBM eServer xSeries 346
Content
Text from the audio portion of the Air baffle/Cover installation movie
To install the air baffle:
- Position the baffle in the system using the slot in the chassis as a guide.
- Lower into position.
Note: The movie above will give you a closer look at the slot in the chassis and the tab on the baffle.
To close Cover:
- Position the cover over the chassis aligning the tabs in the cover with the slots in the chassis.
- Slide the cover forward while rotating the cover release latch to the closed position.
Note: The movie above will give you a closer look at the cover tab and the slot in the chassis.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20Q","label":"xSeries 346"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-58137