CD-ROM drive installation movie - IBM eServer xSeries 206

Content

• Movie player help

Text from the audio portion of installing the CD-ROM drive movie

To install the CD-ROM drive:

1. Slide the CD-ROM drive into the media bay.
2. Connect the signal cable and the power cable.
3. Install the bezel: Insert the two tabs on the bottom of the bezel into the matching loops in the server chassis. Push the top of the bezel toward the server until the two tabs at the top of the bezel lock into place.
4. Here is a closer look at the bottom loop of the bezel.
5. Here is a closer look at the alignment tab.
6. Install the side cover: Position the cover over the chassis and align the tabs on the cover with the slots in the chassis. Slide the cover forward while rotating the cover release latch to the closed position.
7. Here is a closer look at the cover tab and a slot in the chassis.

To install the front door:

1. Align the door pins with the hinge latches and press into place.
2. Here is a closer look at the front door hinges

• View the CD-ROM drive removal movie
• View detailed installation and removal instructions for the xSeries 206