IBM Support

Power supply backplane removal and installation - IBM eServer xSeries 340, Netfinity 4500R

Product Documentation


Abstract

1. Backplane 2. Insulator 3. Screws (2) 4. Plastic retainer Removing the power supply backplane Remove the cover and bezel. Remove power supplies from the backplane

Content

removing the power supply backplane

1. Backplane
2. Insulator
3. Screws (2)
4. Plastic retainer

Removing the power supply backplane
  1. Remove the cover and bezel.
  2. Remove power supplies from the backplane (1).
  3. Disconnect cables from the backplane.
  4. Remove the two screws (3).
  5. Remove the plastic retainer (4).
  6. Remove insulator (2) and replace on new backplane.

Document Location

Worldwide

Operating System

Older System x:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW18M","label":"Older System x->xSeries 340"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HWN13","label":"Older System x->Netfinity 4500R"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
24 January 2019

UID

ibm1MIGR-45585

Page Feedback