IJ45531: CALIBRATION WRONGLY ALLOWS AS FOUND STATUS TO BE CHANGED FROM FAIL TO PASS.

APAR status

• Closed as program error.

Error description

• STEPS TO REPRODUCE:
  
  1. Go to Assets application.
  
  2. Create a new Calibration Asset record with any valid number,
  save and change Status to OPERATING.
  
  3. Go to Data Sheet Template application.
  
  4. Create a new Data Sheet Template with any valid number, 2
  Asset Functions and 1 Calibration Point each as the following:
  
  Asset Function: 1, Description: Asset Function 1, Calibration
  Point? selected, Type: DISCRETE, Repeatable? selected, No
  Adjustment Limit? selected
  Input Information: Tolerance on Input? selected, Min Field
  Resolution: 3, Units: Kg
  Tolerance 1: Single From: -0.300, To: 0.300, As: EU, Status when
  Exceeded: FAIL
  Calibration Point: 11, Description: Point 1-1, Nominal Input:
  Kg, Set Point: 19260.000 Kg
  
  Asset Function: 2, Asset Function 2, Calibration Point?
  selected, Type: ANALOG, Technician can Insert Points? selected,
  No Adjustment Limit? selected
  Input Information: Tolerance on Input? selected, Min Field
  Resolution: 1, Input Range: from 0 to 32100.0 Kg
  Output Information: Min Field Resolution: 1, Output Range: from
  0 to 32100.0 Kg
  Tolerance 1: Status when Exceeded: FAIL, Summed EU +: 0.3,
  Applied As: +/-
  Calibration Point: 21, Description: Point 2-1, Nominal Input:
  6420.0 Kg, Desired Output: 6420.0 Kg
  
  5. Save and approve the record.
  
  6. Go to WO Tracking application.
  
  7. Open a WO against the Calibration Asset created above.
  
  8. Go to Data Sheet tab and associate the Data Sheet created
  above.
  
  9. Save and approve WO.
  
  10. Still in the Data Sheet tab, select the Asset Function 2
  (ANALOG).
  
  11. In the Calibration Points section, enter the value 6420.0 in
  the As Found Input/Output and As Left Input/Output column
  fields.
  
  12. Save the record.
  
  Result:
  For Asset Function 2, both As Found and As Left Statuses change
  to PASS as expected.
  
  13. Still in the Data Sheet tab, select the Asset Function 1
  (DISCRETE).
  
  14. In the Calibration Points section, enter the value 100.000
  in the first As Found Set Point column field, just to simulate a
  fail. And enter 19260.000 in the other column fields just to
  pass.
  
  15. Save the record.
  
  Result:
  For Asset Function 1, As Found Status changes to FAIL as
  expected.
  
  16. Click on View Details icon of Asset Function 1.
  
  17. Scroll down until As Found Status section.
  
  18. Change the Status from FAIL to PASS.
  
  19. Save the record.
  
  RESULTS:
  The system allows the Status to be changed from FAIL to PASS,
  even without changing the entered value. This is the issue.
  
  EXPECTED RESULTS:
  The system should not allow the Status to be changed.
  
  REPORTED IN VERSION:
  IBM Maximo Asset Management 7.6.1.2
  IBM Maximo Calibration 7.6.1.0
  

Local fix

Problem summary

Problem conclusion

• A fix for this APAR will be included in a future release.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  MAXIMO CALIBRAT

• Fixed component ID

  5724R5700

Applicable component levels