IJ43387: CONDUCT AN INSPECTION IS PULLING THE INCORRECT LOCATION WHEN WONUM AND MULTIID ARE THE SAME

APAR status

• Closed as program error.

Error description

• Problem
  When you have a work order number with the same number
  referenced on a  different work order multiid with the same
  inspection form  when conducting an inspection result Maximo is
  pulling the incorrect location
  
  Steps To Reproduce
  
  Go to Application designer
  
  Filter for Wotrack application
  Expose the Multiid attribute in the Multi Asset Loc section
  Save the changes
  
  Go To Work Order Tracking application
  Create a new work order
  
  Populate the location field = BR200
  Click new row in the Multi Asset Loc
  Populate the location field = BR240
  Populate the Inspection Form field = 1004
  Save the work order
  Take note of the multiid number
  Create new work order populate wonum field with same multiid
  number created from previous work order
  Populate location field = AIR100
  Populate the Inspection Form field= 1004 should be the same as
  the first work order
  Save the work order
  Now change the location field from AIR100 to ADDR2001
  Save the work order
  
  Filter for the first work order created
  From Multiple Assets,Locations and Cis section  > Inspection
  Results field > Go to Conduct an Inspection
  
  Results
  Notice that the location listed is from the 2 created work order
  and not the location associated in the Multiple Assets,Locations
  and Cis of BR240
  
  Expected Results
  The location listed in the Conduct an Inspection should be BR240
  
  
  Reported Version
  Maximo 7.6.1.2
  

Local fix

• no work around
  

Problem summary

• ****************************************************************
  * USERS AFFECTED:                                              *
  * MAXIMO                                                       *
  ****************************************************************
  * PROBLEM DESCRIPTION:                                         *
  * CONDUCT AN INSPECTION IS PULLING THE INCORRECT LOCATION WHEN *
  * WONUM AND MULTIID ARE THE SAME                               *
  ****************************************************************
  

Problem conclusion

• The fix for this APAR is contained in the following maintenance
  package: release\fix pack for Release Manage 8.6.0
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  MAXIMO ASST MGM

• Fixed component ID

  5724R46AM

Applicable component levels