IJ33791: INCORRECT LOAD CHART DISPLAY IN GSLP

APAR status

• Closed as program error.

Error description

• PROBLEM: Incorrect load chart display in GSLP when the task is
  scheduled cross multiple shifts.
  
  EXPECT RESULT: The Load should be at a single Shift once that is
  able to fit on the single load
  
  Reproduce steps:
  Config 2 work orders with 27 h duration, each work order has one
  task with same duration. Each task requires for 27h of a
  craft(Say MECH) with quantity 1.
  create work list based on these 2 work orders. Select a shift
  with 8 hours working time
  Load MECH alternative availability as 1.
  Run optimization.
  
  Expected Result: The total consumption hours for MECH in load
  chart should be 27*2=54. It should align with  optimization
  result that 8 hours for the first 6 shifts and 6 hours in the
  7th shift.
  
  
  
  Problem: Once the Second Work Order starts after the start time
  of the Shift the Load of the Work get partial.
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED:                                              *
  * Scheduler users                                              *
  ****************************************************************
  

Problem conclusion

• The fix for this APAR is contained in the following
  maintenancepackage:
  Release 7.6.1.3 of Base Services
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  MAXIMO SCHEDULE

• Fixed component ID

  5724R46SE

Applicable component levels