Note
Before using this information and the product it supports, read the information in Notices.
This edition applies to Fix Pack 4 for version 9, release 5, modification level 0 of IBM Dynamic Workload Console.
IBM Dynamic Workload Console version 9.5.0 Readme File for Fix Pack 4
- Date
- July 9, 2021
-
- Revised August 6, 2021 (New or changed content is indicated in bold font)
- Fix Pack Name
- 9.5.0-IBM-DWC-FP0004
- Product
- IBM Dynamic Workload Console version 9.5.0
- General Description
- IBM Dynamic Workload Console Fix Pack 4 for version 9.5.0
This readme file provides important information about Fix Pack 4 for IBM Dynamic Workload Console version 9.5.0.
This readme file is the most current information for the fix pack and takes precedence over all other documentation for Dynamic Workload Console version 9.5.0.
The most up-to-date version of this readme can be accessed at the following URL: Fix Pack readmes
It is divided into the following sections:
IBM Dynamic Workload Console version 9.5.0 Fix Pack 4 supports all product versions indicated in the IBM Workload Scheduler version 9.5 Release Notes which can be accessed at the following link: Dynamic Workload Console Version 9.5 Release Notes.
For the most up-to-date information about supported operating systems, software and hardware requirements, see the Detailed system requirements document at the following URL: Dynamic Workload Console Detailed System Requirements.
Review the following sections thoroughly before installing or using this fix pack.
About this Fix Pack
This section contains information specific for this Fix Pack including what has been modified or introduced, what has been fixed, product versions or components to which the Fix Pack applies, and compatibility issues, if any.
This section includes the following subsections:
Features introduced with Fix Pack 4
- Version 9.5 Fix Pack 4 delivers the following enhancements:
-
- Changed features and feature capabilities
- Supported WebSphere Application Server Liberty Base versions
- IBM® Workload Scheduler Version 9.5 Fix Pack 4 was formally tested by using WebSphere Application Server Liberty Base V21.0.0.4 and V21.0.0.5.
- Updated OpenSSL libraries
- IBM Workload Scheduler Version 9.5 Fix Pack 4 has been updated with OpenSSL libraries.
IBM Workload Scheduler includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (https://www.openssl.org/).
- Dynamic Workload Console Managing Custom roles
- Dynamic Workload Console users are granted access to resources based on the role to which they have been assigned. Now you use Entities to add users to the related role or create new entities to be associated to the role.
- Audit Report Inclusion in the Dynamic Workload Console
- Under the Type of Report section you can now now find: Audit Detail Report option: use to view detailed listing of all occurrences of the different audit types. You will also find Audit General Report option: use this to view general listing of all occurrences of the different audit types.
- Satisfying Requests for Enhancements (RFEs)
RFEs give customers the opportunity to collaborate directly with the product development team and other users. The team prioritizes and develops new product features based on proposals made by customers.
IBM Workload Scheduler V9.5 Fix Pack 4 delivers the following RFEs:
- RFE 142834 - White labelling
- IBM Workload Scheduler provides the capability to customize user interface labels. You can now personalize the UI labels for the following UIs: Self-Service Catalog and Self-Service Dashboards mobile applications.
-
- Resolved Common Vulnerabilities and Exposures (CVE)
- The following CVEs have been resolved with this Fix Packs:
-
- CVE-2018-15494
- CVE-2020-2161
- CVE-2020-2773
- CVE-2020-5258
- CVE-2020-14781
- CVE-2020-14782
- CVE-2020-14792
- CVE-2020-14797
- CVE-2020-14779
- CVE-2020-26296
Features introduced with Fix Pack 3
- Version 9.5 Fix Pack 3 delivers the following enhancements:
-
-
- Changed features and feature capabilities
-
- Support for file transfer jobs on agents at Version 9.3
- Agents at Version 9.3 can run existing file transfer jobs without problems. Jobs you create or edit from the Dynamic Workload Console at Version 9.5, Fix Pack 3 are not supported on agents at Version 9.3, but you can work around this problem by saving the jobs in the composer command line after editing them with the Dynamic Workload Console. The best practice is applying the latest fix pack level to the agents.
- Skip objects when importing a workload application template
- You can select the objects within a workload application template you do not want to import, both from the Dynamic Workload Console and wappman command. If you choose to skip an object, an object with the same name must be present in the target environment, otherwise an error message is returned. For more information, see wappman.
- New optman option to specify the default licensing model for IBM Workload Scheduler workstations
- You can now use the defaultWksLicenseType option to specify the default licensing model to be applied to IBM Workload Scheduler workstations. In a Docker environment, this causes all workstations to be created with the value assigned to the defaultWksLicenseType option. For more information, see Global options - detailed description.
- The term $SLAVES was removed from the security file and replaced with the term $AGENTS
- Because it is politically incorrect, the term $SLAVES, which applies to all fault-tolerant agents in both the classic and role-based security models, was replaced with the term $AGENTS with the same scope. No change is required to your existing scripts nor environments. For more information, see Configuring user authorization (Security file).
- Improvements in time zone management for external follows dependencies for jobs and job streams
- When the product evaluates matching criteria to resolve external follows dependencies it compares the start times using local time if both job stream instances use the same timezone, or it uses UTC in case they use different timezones. For more information, see Managing external follows dependencies for jobs and job streams.
- tws_inst_pull_info and dwc_pull_info troubleshooting tools replaced by wa_pull_info tool
- The new wa_pull_info tool replaces both tws_inst_pull_info and dwc_pull_info tools. Use the wa_pull_infotool to capture product data, as directed by software support. For more information, see data capture utility.
- Fixlets for IBM Workload Scheduler version 9.5, Fix Pack 2 and Fix Pack 3 agents now available for HCL BigFix
- You can now download fixlets for version 9.5, Fix Pack 2 and Fix Pack 3 from the BigFix.me community web site . Use HCL BigFix to view, upgrade, and manage IBM Workload Scheduler agents. For more information, see upgrading agents using HCL BigFix.
- Satisfying Requests for Enhancements (RFEs)
-
RFEs give customers the opportunity to collaborate directly with the product development team and other users. The team prioritizes and develops new product features based on proposals made by customers. IBM Workload Scheduler V9.5 Fix Pack 3 delivers the following RFEs:
- RFE 18054: Custom role privileges
- Now you can define new custom roles, assign specific privileges to a set of users, and also assign privileges outside the scope of the existing system role.
- RFE 116406: Add state=cancl on showjobs command
- You can now filter jobs which are in canceled status. For more information, see widlcards.
- RFE 116762: Improvements for Event Driven Workload Automation
- You can now optionally modify the event processor server, for example to use a load balancer, by adding the Broker.Workstation.evtproc property in the BrokerWorkstation.properties file. For more information, see BrokerWorkstation.properties file.
- RFE 117719: End time column available for job streams in monitoring panel
- This column is available when creating a job task, with this enhancements the end time column is also available for job streams.
- RFE 123642: DWC historical reports' self-cleaning option
- A new self-cleaning property has been enabled to remove all temporary files created after a report generation.
- RFE 124339: New Graphical View order settings.
- Now you can reorganize the dependencies view in the Graphical View by clicking on the Graphical view button and choosing the order in which you want to see them. The available options are:
- From right to left
- From left to right
- From top to bottom (default)
- From bottom to top
You can also edit the TDWCGlobalsettings.xml
file to customize the default Graphical View settings.
- RFE 126163: DWC user with read only access locks out an ISPF user with modify privilege
- z/OS environment only. Now if you open a list of job dependencies from the Dynamic Workload Console, the related ISPF panel is locked and it is not possible to edit dependencies until the job dependencies panel is closed.
- RFE 85329 / RFE 130134: Ability to clean the query history
- When you have a very high number of past queries saved in the Query drop-down list, it is not easy to find the query that you really need. With this fix pack, you can manage the list either by removing single queries or clearing all the query history.
- RFE 133936: Enhancement to composer binary to allow schedule objects to be pulled via "Active" or "DRAFT" status
- Two new filters (draft and active) are now available with the composer command to filter job stream in draft or active status. For more information, see filters and wildcards.
- RFE 134893: default licensing model for IBM Workload Scheduler workstations
- You can now specify the default licensing model for IBM Workload Scheduler workstations. By setting appropriately the values of the defaultWksLicenseType and licenseType global options, you can define the default licensing model to be applied to each workstation at creation time. For more information, see the detailed description of global options.
- RFE 137834: Modify the configureDB upgrade script to include any Subsequent additional IDs
- Modify the configureDB database upgrade script to include any additional Subsequent Database IDs for DB2. In the script which translates 9.3 database to the 9.5 structure, capture the roles assigned to the views before they were dropped and recreate them so you can reassign those roles at the end of the process. It should also assign those roles to any new views created. For more information, see How can I avoid providing the database administrator credentials when creating the database with DB2
- RFE 139348: The report output limit has been improved to avoid Dynamic Workload Console issues
- The default value for the Enable output limit check box has been increased from 5000 to 10000. This enables you to obtain the expected report output, and the Dynamic Workload Console to continue to work correctly without issues.
Furthermore, if a different default value is needed, a user with administration grants can uncomment the new
SQL_REPORT_HTML_FORMAT_RESULT_MAX_NUMBER key in the
TDWCGlobalsettings.xml
file and enter the desired default value (either higher or lower to the default 10000).
Note: For HTML format, the SQL_REPORT_HTML_FORMAT_RESULT_MAX_NUMBER key is valid for all reports. For PDF format, the key is valid for Custom reports only.
If you want to generate a report with less than 30000 records, you can use both HTML and PDF formats. If you want to generate a report with more than 30000 records, use only the PDF format to avoid reliability issues with the browser.
For further information about how to modify the TDWCGlobalsettings.xml
file, see the Customizing your global settings section in the Dynamic Workload Console User's Guide.
- RFE 140216: Update optman global Options through REST API
- You can now use REST APIs to update global options, in addition to the standard optman command.
- RFE 141849: Justification fields for Workload Application Template import operation
- You can now maintain an audit trail recording any changes and the related justifications while creating workload application templates with the wappman command. For more information, see wappman.
- RFE 143098: Add all authenticated users
- Simply adding a line into the authentication file, now it is possible to add all new users to a group and - without any other configuration - they will be authorized to login into the Dynamic Workload Console.
From now it is not necessary to assign a role to every single user. If the user registry already contains groups of users that are properly defined for using the console, it is possible to assign roles to groups too. If groups are not available in the user registry, then the special role all authenticated users can be used to assign roles to all the users at once.
For more information, see the Configuring roles to access the Dynamic Workload Console
- RFE 143162: Prevent job streams from completing in error when the start condition is not met
- The new enStartCondSuccOnDeadline global option is now available to specify if you want your job stream to be canceled when the start condition is not met, even if the Start once option is not selected. By setting this option, you can avoid that your job stream completes in error due to just one failed run, also in the case when it previously ran successfully several times. With the new enStartCondSuccOnDeadline global option set to yes, when the deadline for the start condition is met, the monitoring job is confirmed in SUCC status and the job stream is canceled. When the option is set to no, the monitoring job is killed, so both the monitoring job and the job stream change to ABEND status. For more information, see Global options - detailed description.
- RFE 143169/143839: Managing an event rule in the Dynamic Workload Console
- Usability improvements for event rule actions such as editing, duplicating, and deleting event rules in the Dynamic Workload Console Workload Designer. In addition, more space is now provided in the properties section for events and actions.
- RFE 143196: possibility to select object to be imported during a WAT import
- You can now select the objects to be imported while creating a workload application template and skip unwanted objects. For more information, see wappman.
- RFE 143260: Latest Start included in the critical path list and hot list
- To identify problems related to a critical path that has a potential or high risk, the Latest Start time is now included in the critical path, in the hot list, and in the results of a monitor critical job query in the Dynamic Workload Console. The time before which the job must start is displayed provided all dependencies are satisfied.
- RFE 142794
- IBM Workload Scheduler Version 9.5 Fix Pack 3 has been updated with OpenSSL version 1.1.1g.
IBM Workload Scheduler includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (https://www.openssl.org/).
- RFE 148080: Provides the capability to constrain a product component pod to run on particular nodes
- The nodeAffinityRequired parameter has been added to the configurable parameters that can be customized when deploying product components with containers. With this parameter, you can determine on which nodes a component can be deployed using custom labels on nodes and label selectors specified in pods. Red Hat OpenShiftAmazon EKSAzure AKS
- RFE 140107, 140108: Ability to perform actions on engines in the Dynamic Workload Console through an API call
- Without logging to Dynamic Workload Console, you can create, test, edit, delete, share, unshare an engine in an automated way through the new API user role introduced for the Dynamic Workload Console.
The URL is specified in the following format: https://<hostname>:<port>/dwc/api
To view a complete list of RFEs, new, planned, and delivered, see: RFE online community.
- Improved What-if responsiveness
- Thanks to the improved calculation time, you can now visualize complex networks with a reduced rendering time.
- Entitlement to Db2 version 11.5
- With the Dynamic Workload Console v9.5 Fix Pack 3, you are entitled to use Db2 version 11.5 Standard Edition.
- Supported WebSphere Application Server Liberty Base version
- IBM Workload Scheduler version 9.5 Fix Pack 3 was formally tested using WebSphere Application Server Liberty Base versions 20.0.0.10 and 20.0.0.11.
- Supported WebSphere Application Server for z/OS Liberty version
- If you are using IBM Z Workload Scheduler version 9.5 with APAR PH30466 installed, to work with the Dynamic Workload Console you are required to run WebSphere Application Server for z/OS Liberty version 20.0.0.10, or later.
- Updated OpenSSL libraries
- IBM Workload Scheduler Version 9.5 Fix Pack 3 has been updated with OpenSSL version 1.1.1g. IBM Workload Scheduler includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/).
- CIT
- IBM Workload Scheduler Fix Pack 3 has been updated with CIT version 9.2.21.0000.
- Updated version of GSKIT
- IBM Workload Scheduler Fix Pack 3 has been updated with GSKIT version 8.0.55.6.
- OpenJDK Runtime Environment
- IBM Workload Scheduler Fix Pack 3 has been updated with Java version 1.8.0_265-b01.
- Resolved Common Vulnerabilities and Exposures (CVE)
- The following CVEs have been resolved with this Fix Packs:
- CVE-2020-4674
- CVE-2020-4673
- CVE-2020-4329
- CVE-2020-2830
- CVE-2020-2800
- CVE-2020-2781
- CVE-2020-2757
- CVE-2020-2756
- CVE-2020-2755
- CVE-2020-2754
- CVE-2020-2601
- CVE-2020-2590
- CVE-2020-17639
- CVE-2020-15122
- CVE-2020-14621
- CVE-2020-14593
- CVE-2020-14583
- CVE-2020-14581
- CVE-2020-14579
- CVE-2020-14578
- CVE-2020-14577
- CVE-2020-14556
For more information about new features introduced with this fix pack, see Summary of enhancements.
Helpful videos demonstrating new features for IBM Workload Scheduler is available on Workload Automation YouTube channel.
Features introduced with Fix Pack 2
- Version 9.5 Fix Pack 2 delivers the following enhancements:
-
- Event rules have never been so easy
-
A brand new experience that optimizes the creation and editing of event rules.
A modernized user experience that makes the definition of event rules easier, intuitive, and well-organized, thanks to the folder-based structure. Not only the visual usability has been enhanced, but also the whole management of the event rule definitions, their properties and the interactions with them. A lot of news? Don’t worry, the new contextual help can guide you through the new interface and its fields. On the home page, you can find the page-related topics, and if they are not sufficient, you can search for what you need by using the search bar. Furthermore, by clicking on a field, the help automatically updates itself and shows you the information about the selected field.
- Dashboard: See the data from more than one engine at the same time
-
It is now possible to select more than one engine in the dashboard and see the related results in the widgets.
- Organize scheduling objects in workflow folders
-
Gain greater business agility by organizing your scheduling objects in a hierarchy of folders. Organize them by lines of business, departments, geographies, or any custom category that makes sense for your business operations.
With this fix pack, you can now organize the following scheduling objects into workflow folders:
- jobs
- job streams
- workstations
- workstation classes
- calendars
- event rules
- prompts
- resources
- run cycle groups
- variable tables
- workload applications
Folders also simplify security access. Associate access control lists to individual folders to restrict the rights to which folder any single user or group can access. You can also delegate security management of a specific folder and its sub-folders to other users.
- Satisfying Requests for Enhancements (RFEs)
-
RFEs give customers the opportunity to collaborate directly with the product development team and other users. The team prioritizes and develops new product features based on proposals made by customers. IBM Workload Scheduler V9.5 Fix Pack 2 delivers the following RFEs:
RFE 134569: Dynamic Workload Console 9.5 not rendering properly (height) in resolutions over 1100px
The Dynamic Workload Console now supports the customization of every resolution.
- RFE 139443 - The Dynamic Workload Console does not accept special characters (#, $ etc. ) in the Application Description name but these characters are allowed in IBM Z Workload Scheduler is available on Workload Automation YouTube channel
Special characters are valid for the z/OS job stream name, which corresponds to the application ID.
- RFE 137969 - Dynamic Workload Console Explore: ITEMS visible in List View
Workload Designer explore is now available with list view along with data view. By default, data view will be listed in Dynamic Workload Console when explore option is clicked. List view can be traversed from explore view and gives the details Name, type, workstation and object locked by. It is easy to switch between the views from explore and once the view is switched, it retains the last view for easy reference in Dynamic Workload Console.
- RFE 133169: Additional query filter criteria has been added for multiple homogeneous engines
When monitoring your workload from the Dynamic Workload Console with a multiple engine selection, only filters in common between distributed and z/OS engines were shown. This behavior is still valid for the selection of non-homogeneous engines. For multiple homogeneous engines, the same filter options for a single engine are now available.
- RFE 139843: Possibility to specify the maximum number of objects shown in each graphical view
By changing a property in the setting file it is now possible to edit the maximum number of objects shown in a graphical view. see this section for more information: https://www.ibm.com/support/knowledgecenter/SSGSPN_9.5.0/com.ibm.tivoli.itws.doc_9.5/distr/src_tsweb/General_Help/awsadgraphviews.htm
To view a complete list of RFEs, new, planned, and delivered, see: RFE online community.
- Updated version of WebSphere Application Server Liberty Base
- Fix pack 2 has been formally tested using WebSphere Application Server Liberty Base version 19.0.0.12 and 20.0.0.3. Because of a known issue affecting version 20.0.0.1, APAR PH21281, we strongly recommend you avoid using it.
For more information about new features introduced with this fix pack, see Summary of enhancements.
Helpful videos demonstrating new features for is available on Workload Automation YouTube channel.
Features introduced with Fix Pack 1
- File transfer job plug-in enhancements
-
Version 9.5 Fix Pack 1 delivers the following enhancements to the File transfer job plug-in:
- RFE 124923: Appending text to an existing file
- The file transfer job plug-in now includes an option to append the data contained in the transferred file to the existing file on the destination system. This avoids overwriting the existing file and preserves any changes that were made to the file prior to the transfer. The option applies to file transfers of type download and for files encoded as text.
- RFE 127294: Specifying FTP SIte subcommands
- An option has been added for file transfers originating from a distributed environment to a z/OS target workstation, using the FTP protocol, to specify SIte subcommands. For example, you can specify a subcommand to define primary and secondary space allocations.
- RFE 123295: Deleting a source file after an upload transfer
- An option has been added to specify if you want to delete the source files after a file transfer of type "upload".
- Delegating administrator privileges on folders to other users
-
The IBM Workload Scheduler administrator can grant permissions to a user on a folder so that the user can freely create new access control lists or modify existing access control lists on the folder or any sub-folders to which the user has been delegated administrator permissions. The user can in turn give access to the folder or sub-folder to other users by specifying an existing role to which the user wants to grant the access, as well as the folder. In this way, the IBM Workload Scheduler administrator can delegate the security to various organizations in the business to other users who can act independently as administrators for that organization.
A new access type "acl" has been added for folder objects. With this type of access, users can create access control lists for the folder assigned to them by assigning predefined roles to users and groups on the entire folder hierarchy or on specific sub-folders.
For more information about delegating permissions on folders, see Managing folders.
- OpenID Connect Provider as an identity provider
- Enable web single sign-on and use the OpenID Connect Provider as an identity provider.
Client applications, for example, the Dynamic Workload Console, can verify the identity of a user by relying on authentication from an OpenID Connect Provider. You can configure the WebSphere Application Server Liberty Base server to function as an OpenID Connect Client to take advantage of web single sign-on and to use the OpenID Connect Provider as an identity provider.
To simplify the configuration of the WebSphere Application Server Liberty Base server, a sample configuration file in XML format is provided.
For more information about configuring WebSphere Application Server Liberty Base server to function as an OpenID Connect Client, see Configuring an OpenID Connect Client.
- Workload dashboard improvements
- With the latest release, new enhancements have been added to the workload dashboard.
- Simplification of the use of the Table widget combined with Engine list datasource: By selecting the Engine list and the Table widget, the related fields are automatically displayed in the list without the need to add them manually.
- Light redesign of KPI and Bar chart widgets, with different colors and a smoother style.
- Additional widgets: Bubble chart and Free text. The Bubble chart represents data with a series of bubbles in descending order and size. The bubbles might change in dimension and position according to the variation of data. The Free text gives the possibility to have useful notes at your fingertips.
- Broker CLI commands
- The resource and jobstore commands have been reactivated.
Note: To make Broker cli and Broker UI work, both Dynamic Workload Console and master domain manager should be updated to the version 9.5, Fix Pack 1.
- Updated version of WebSphere Application Server Liberty Base
- Fix pack 1 has been tested using WebSphere Application Server Liberty Base version 19.0.0.4 and 19.0.0.5
- Enhancements in the Reports feature
-
- Folders in reports are now fully supported.
- Reports are now supported on MSSQL and Oracle databases
- Two new columns are now available in reports which use a z/OS engine:
- SUBSYSTEM NAME
- WORKSTATON TYPE
- Satisfying Requests for Enhancements (RFEs)
-
Requests for Enhancements (RFEs) give customers the opportunity to collaborate directly with the product development team and other users. The team prioritizes and develops new product features based on proposals made by customers.
To view a complete list of RFEs, new, planned, and delivered, see: RFE online community.
With the
Dynamic Workload Console V9.5, Fix Pack 1 the following enhancements have been implemented for the
z/OS environment.
- Dynamic Workload ConsoleDynamic Workload Console can be installed on WebSphere Application Server for z/OS Liberty.
- For details, see Installing Dynamic Workload Console on WebSphere Application Server for z/OS Liberty.
- Filtering jobs that are late
- From the General filter for z/OS jobs window, you can browse the jobs in the current plan that are late according to the following criteria:
- Their latest start time
- The day and time you specified in the Not Started Alert or Not Started Action field.
- Either their latest start time, or by the day and time that you specified in the Not Started Alert or Not Started Action field.
- Setting alerts or actions if a job in plan does not start or complete
- You can edit the properties of a job in plan, by modifying or setting that an action is taken if the job does not start or complete within the specified date and time.
- Dependencies Resolution
- From the Self-Service Catalog you can define the dependencies resolution for the service, as follows:
- None
- No dependency resolution is necessary. This is the default value.
- All
- Both predecessor and successor dependencies must be resolved.
- Predecessor
- Predecessor dependencies must be resolved.
- Successor
- Successor dependencies must be resolved.
For more information about new features introduced with this fix pack, see Summary of enhancements.
Helpful videos demonstrating new features on Workload Automation YouTube channel.
APARs and defects fixed in IBM Dynamic Workload Console Fix Pack 4 for version 9.5.0
This section lists APARs and internal defects resolved by Fix Pack 4.
Table 1. APARs addressed in Fix Pack 4
APAR |
ABSTRACT |
|
|
IJ04277 |
CANNOT REMOVE "DRAFT" FROM SCHEDULES WITHOUT "DELETE" ACCESS ON JOBSTREAMS |
IJ06354 |
AFTER PASTING SCRIPT/COMMAND INFORMATION TO THE FIELD, TASK TAB HAS "RED X" AND A DEFINITION CAN NOT BE SAVED |
IJ06491 |
CUSTOM CONFIGURE TASKS (SET AUTO REFRESH) NOT WORKING AFTER FIRST INTERVAL |
IJ11514 |
AWSUI0833E AND AWSJSY514E ERRORS OCCUR ON WORKLOAD MONITOR ACCESSING DBCS NAME |
IJ11561 |
"RUN" AND "EDIT" BUTTONS GO OUTSIDE OF BROWSER AREA ON MONITOR JOBSTREAMS/JOBS WINDOW |
IJ12900 |
RUNCYCLE PREVIEW IS NOT FILLED OPENING IN VIEW MODE (NOT EDIT) A JOBSTREAM CONTAINING ANY START CONDITION |
IJ15693 |
AWSJCO198I IS DISPLAYED WHEN CPU LIMIT IS "SYSTEM" |
IJ16286 |
ESTIMATED START TIME IN WHATIF TOOL INCORRECT IN DWC |
IJ17450 |
JOBPROP IAWTSZ IS NOT BEING INTERPRETED AS THE SCHEDULE DATE IF A SCHEDULE IS SUBMITTED WITH PRIORITY 0 AND THEN RELEASED |
IJ17474 |
DBCS PROMPT MESSAGE TEXT IS GARBLED ON DWC. |
IJ18196 |
JOBSTREAM CANNOT BE SUBMITTED FROM DWC IF DRAFT JOBSTREAM WITH THE SAME NAME EXISTS |
IJ20732 |
TIMEZONE FIELD IS "NONE" ON MANAGE WORKLOAD DEFINITIONS (DWC) WHEN VIEWING THE JOBSTREAM |
IJ21061 |
JOBSTREAM "CREATE LIKE SELECTED" ON WORKLOAD DESIGNER DOES NOT WORK |
IJ21136 |
JOB HISTORY GENERATED ARE NOT SORTED |
IJ22077 |
JCL RETRIEVED FROM MODEL DOESN'T HAVE A LEADING SPACES |
IJ27333 |
THE RESOURCE OBJECT IS LOCKED IN DWC IF CLOSE THE MONITOR RESOURCE SUB TAB WITHOUT SAVE/OK/CANCEL |
IJ28479 |
DWC 9.5 ENHANCING PROCESS/STEPS IN APP LAB CAUSES ERROR 404 |
IJ28561 |
DWC 9.5 FP2 OBJECT VERSION HISTORY NOT VISIBLE |
IJ28666 |
ORACLE EBS JOB PARAMETER IS NOT PASSING CORRECTLY FROM IWA TO ORACLE |
IJ28813 |
DWC CANNOT SHOW PLAN VIEW 9.5 FP2 |
IJ28925 |
BOOKMARK ICON DOES NOT GREY OUT WHEN ARCHIVED PLAN IS SELECTED |
IJ28951 |
JOB LOGS NOT FOUND |
IJ29098 |
JOB MANAGEMENT PLUGIN JOB FAILED WITH THE ERROR MESSAGE AWKJMJ043E IF ITS MONITORED JOB ABEND |
IJ29258 |
DWC CAN NOT CHANGE JOB STEP FROM THE RERUN POPUP WINDOW |
IJ29507 |
UNABLE TO SHARE A PREDEFINED REPORT WHEN THE FORMAT IS UNDER CSV ON DWC 9.5 FP1 AND FP2 |
IJ29546 |
BUG WITH JOB DEFINITION AFTER SETTING RECOVERY OPTION |
IJ29760 |
UNABLE TO VIEW/LIST/EDIT DYNAMIC DATABASE JOBS IN THE DWC |
IJ30074 |
PARAMETER WITH A "NULL" VALUE IS NOT PASSED TO ORACLE WHILE SUBMITTING EBS ORACLE JOBS - SHOWS BLANK INSTEAD |
IJ30075 |
DWC 9.5.0 FP03: JOBLOG CAN NOT BE VIEWED DUE TO AWSUI0791E ERROR |
IJ30253 |
THE DEPENDECIES RESOLUTION CANNOT BE SELECTED WITH IE11 |
IJ30295 |
PERSONALIZED REPORTS RETURN ERRORS ON IWS/DWC 9502 USING ORACLE19C |
IJ30491 |
STERLING PLUGIN DOESN'T WAIT STERLING JOB PROCESS EXECUTION COMPLETION |
IJ30701 |
PROBLEM WITH DOWNLOAD JOBSTREAM DEFINITION DWC 9.5 FP2 |
IJ30755 |
SPECIAL CHARACTER SEMICOLON (;) IGNORED IN CREATION OF NEW EVENT RULE IN DWC 9.5 FP02 |
IJ30831 |
WORKSTATION MUST BE DEFINED WHEN ADDING A (BATCH) USER TO TWS 9. 5 DATABASE VIA DWC |
IJ30858 |
WHEN UPGRADING THE DWC AND IWS FROM 9.5 FIX PACK 02 TO FIX PACK 03 FROM WORKLOAD DESIGNER - THE URL STILL SHOW 9.5 INCORRECTLY |
IJ30899 |
TWS SESSION INACTIVITY FEATURE IS NOT WORKING PROPERLY |
IJ30935 |
CANCEL AND RE-CREATE SETTINGS OPTION NO LONGER EXIST.BVT - REMOVE FROM DOCUMENTATION |
IJ30949 |
CREATE LIKE BUTTON NOT WORKING IN DWC FOR ORACLE E-BUSINESS JOB DEFINITION ON DA WITH FTA |
IJ30952 |
TWS 9.5 FP3 FILE TRANSFER JOB ISSUE - USER AUTHENTICATION ERROR |
IJ30991 |
AWKAZR008E Get Virtual Machines failed IWS 9.4 FP5 |
IJ31168 |
JUSTIFICATION WINDOW - "X" BUTTON NOT WORKING AS EXPECTED |
IJ31173 |
SEVERAL NULLPOINTEREXCEPTION ARE LOGGED INTO DWC MESSAGES.LOG |
IJ31522 |
9.5 FP3 FILETRANSFER PLUGIN DOES MAKE FILE NAMES CASE SENSITIVE ON WINDOWS PLATFORMS |
IJ31666 |
REPORT ENGINE SWITCHED TO Z/OS WHEN DWC LANGUAGE IS ITALIAN |
IJ31751 |
CANNOT SET "OPTIMIZATION" IN CREATING A DPOOL IF ORDERED WORKSTATION LIST DOES CONTAIN ELEMENTS |
IJ31838 |
NO OPTION TO SELECT THE NUMBER OF DAYS IN MANAGE PREDEFINED REPORTS --> JOB RUN HISTORY REPORT DURING INITIAL REPORT CREATION |
IJ31968 |
NOT ABLE TO FETCH JOB LOG AND JOB RUN HISTORY AND JOB LOG ON Z/OS ENGINE FROM DWC AFTER THE UPGRADED TO 9.5 FP3 |
IJ31991 |
VARTABLE LIST DATE VALUE CHANGED TO FUTURE YEAR IF SWITCH OR TANGLE BETWEEN TWO OPENED TABLE VIEWS IN THE WORKLOAD DESIGNER |
IJ32050 |
DWC - NO DOT POSSIBLE WHEN FILTERING LIST USING MULTIPLE ENGINES |
IJ32051 |
CANNOT "VIEW" WORKLOAD DEFINITIONS AFTER APPLYING FP3 |
IJ32054 |
REPORT TASKS CAN BE SHARED AFTER SETTING THE "LIMIT TASK AND ENGINE SHARING" IN TDWCGLOBALSETTINGS.XML.TEMPLATE TO TRUE |
IJ32128 |
PENTEST FINDING ON IWS 9.5 FP03 |
IJ32212 |
"AWSUI417E UNABLE TO RETRIEVE THE LIST OF PROCESSES" ERROR WHILE ACCESSING THE LIBRARY ON APPLICATION LAB |
IJ32526 |
THE SETTING OF DWC 9.5 WHICH WAS INSTALLED USING NON-ROOT USER WILL BE OVERRIDDEN IF UPGRADE TO FP3 |
IJ32565 |
MONITOR COMPUTERS ON BROKER ISSUE PERFORMING ACTION "SET ONLINE/OFFLINE" WHEN MULTIPLE ROWS ARE SELECTED |
IJ32837 |
"/" CHARACTER IS ADDED INTO JOBSTREAM/WORKSTATION FIELDS WHILE CREATING SHADOW JOBS |
IV94487 |
APPLICATION LAB - JOBSTREAM AT DEPENDENCY INCORRECTLY REPORTED IN “ENHANCED” JOBSTREAM |
IJ30075 |
DWC 9.5.0 FP03: JOBLOG CAN NOT BE VIEWED DUE TO AWSUI0791E ERROR |
Table 2. Defects fixed in Fix Pack 4
DEFECT |
ABSTRACT |
WA-86486 |
DWC: NO ERROR MESSAGE IS DISPLAYED WHEN CONNECTION TO THE DB FAILS |
WA-91838 |
DO NOT CREATE INSTALL_TEMPLATES FOLDER AFTER A FRESH DWC INSTALLATION |
WA-92575 |
GROUP IS SUCCESSFULLY UPDATED WHEN EDIT (ALL TYPE REPORT) ONLY BUT NOT ABLE TO UPDATE WITH SHARE BUTTON BECAUSE 'AVAILABLE GROUP' TEXT BOX IS NOT PRESENT IN PREDEFINED REPORT ON DWC FP3 |
WA-98250 |
Obsolete CBC ciphers |
APARs and defects fixed in IBM Dynamic Workload Console Fix Pack 3 for version 9.5.0
This section lists APARs and internal defects resolved by Fix Pack 3.
Table 3. APARs addressed in Fix Pack 3
APAR |
ABSTRACT |
IJ02098 |
File creation monitor event rule fails on Windows when file path is too long. |
IJ12621 |
Unable to edit restful job after creating it. |
IJ21878 |
The Compare versions window appears blank if Internet Explorer v11 Compatibility View Setting is enabled for Dynamic Workload Console. |
IJ22076 |
The Rerun with Successors window appears blank if Internet Explorer v11 Compatibility View Setting is enabled for Dynamic Workload Console. |
IJ23160 |
EQQX550 No variable duration or deadline was specified with z/OS engine. |
IJ23942 |
Unable to change the properties of a predefined job before submission. |
IJ24952 |
Cannot create a new report in Dynamic Workload Console by using Internet Explorer V11. |
IJ25243 |
dwcinst fails with encrypted password in the dwcinst.property file. |
IJ25261 |
All internal job dependencies for jobstreams that have option "Valid from" set, display "<not named>. |
IJ25371 |
The readme for docker containers does not explain how to obtain the correct image name. |
IJ25537 |
HHHHMM range 0000 - 320000 for time definition for stream or run cycle is incorrect on documentation. |
IJ25580 |
Dynamic Workload Console does not support British English date format. |
IJ25632 |
In Japanese language, the resource editing page is shown as blank. |
IJ25675 |
Users are experiencing an error when attempting to submit a predefined stream. |
IJ25722 |
From Monitor Workload, cannot add or remove columns when using Japanese or other languages. |
IJ25928 |
In Dynamic Workload Console v9.5 it seems that using a VIP and go into jobs from jobstream nothing is displayed until WebSphere Application Server Liberty Base is recycled. |
IJ25965 |
Job Monitor and Jobstream Monitor does not respond when user is not authorized to access jobs and jobstreams. |
IJ25973 |
Creating a REST API datasource in the Dynamic Workload Console that would list the job streams for a user does not work. |
IJ25993 |
Creating a new user requires a workstation. |
IJ26153 |
Jobs that are held are showing incorrect output on Dynamic Workload Console. |
IJ26524 |
ALTPASS works only if you select Manage Engines from the Administration drop-down menu. |
IJ26812 |
For an external job dependency, option "Within an absolute interval" cannot be saved |
IJ26836 |
Security vulnerability issue with Tivoli Workload Scheduler TWSWebUI. |
IJ27153 |
Using a custom datasource for resources and using a created datasource in a widget V9.5 Fix Pack 2 does not display correct data. |
IJ27233 |
Incorrect message issued in Job Monitor. |
IJ27307 |
The run cycle preview showsmonth numbers instead of month names. |
IJ27688 |
CSV report output content is restricted to 10000 lines. |
IJ27714 |
Copying or duplicating a Custom SQL Report is not successful. |
IJ27825 |
Users cannot delete their own predefined report tasks. |
IJ27848 |
Jobstream is not closed after editing. |
IJ27849 |
Bad graphical view in Workload Designer. |
IJ28509 |
Webseal token is not recognized by the Dynamic Workload Console. |
IJ28510 |
Group names longer than 52 characters are not allowed. |
IJ29092 |
The Manage Workload Security page is blank. |
Table 4. Defects fixed in Fix Pack 3
DEFECT |
ABSTRACT |
WA-87948 |
Installation fails due to the encrypted passwords and the = (equals) sign that truncates values in the properties file. |
WA-87949 |
When using an MsSQL database, in the TableSpace properties in ConfigureDB is always used the default path. |
WA-88023 |
If db_port value is left blank, the default value is 50000 for all databases. |
WA-88107 |
WLP_INSTALL_DIR property is missing in the ConfigureDB property file for windows. |
WA-88213 |
When installing the Dynamic Workload Console on Linux, the installation fails if the path of inst_dir and data_dir is the same. |
APARs and defects fixed in IBM Dynamic Workload Console Fix Pack 2 for version 9.5.0
This section lists APARs and internal defects resolved by Fix Pack 2.
Table 5. APARs addressed in Fix Pack 2
APAR |
ABSTRACT |
IJ05782 |
Help in Japanese language for IBM Workload Scheduler is not available |
IJ07891 |
About Dynamic Workload Console on reply to local prompt : getting error AWSJDB101E AWSJDB817E AWSUI697W but the reply is performed correctly anyway |
IJ17162 |
Viewing predecessor information in the production plan causes was hang |
IJ17387 |
Workload automation template import replace fails with two schedules having a new object cross referenced |
IJ17690 |
When you re-open a job with server:port the port is not shown on Dynamic Workload Console |
IJ17812 |
dwc 9.5 & 9.5fp1 job stream plan query empty using shared engine |
IJ18059 |
Error while adding a Variable table to a new service in self-service catalog |
IJ18457 |
dwc 9.5 performance issues on slow network. |
IJ18841 |
job properties on jobstream workload designer are english on japanese environment |
IJ19130 |
Filters does not work for "RestAPI" datasource for zos controller |
IJ19618 |
When creating a DWC datasource a filter can not be correctly applied when using a zos engine |
IJ19772 |
Restart\Cleanup from DWC causes OC1 ABEND in IWS SERVER STC |
IJ19800 |
ERROR 404: SRVE0190E: file not found: / encountered when attempting to authenticate using openID |
IJ19802 |
An engine connection using single sign-on which authenticates with openID will not connect |
IJ19852 |
Dynamic Workload Console custom board does not work when selecting a pie chart or objects |
IJ20058 |
DWC designer issue with @ in joblib - the value contains incorrect chars |
IJ20097 |
Error AWSUI6007E encountered using copy/paste feature in dwc workload designer |
IJ20175 |
DWCINST.SH fails with liberty version error if LANG=JA_JP.UTF-8. Same for ENGINE |
IJ20382 |
Submit job into jobstream from dwc > monitor workload > monitor job streams starts immediately even earliest start |
IJ20383 |
Re-submit a jobstream from dwc, the pri hold or earliest start time settings lost and the job stream starts immediately |
IJ20745 |
DWC editing the workstation field via job stream editor does not save successfully |
IJ20907 |
DWC remove the unused fake credentials from the rest api |
IJ21032 |
DWC 951 blank page and tab reload when previously opened tabs are close |
IJ21092 |
DWC only shows up to 6 job streams in "submit predefined job streams" screen |
IJ21216 |
In DWC, when selecting over 100 jobs or job streams to perform it's performing only 100 operations |
IJ21426 |
Submitting ad hoc job streams sometimes does get jobs from job stream previously submitted |
IJ21751 |
Drill down does not work as expected for critical jobs widget within Dynamic Workload Console default z workload dashboard |
IJ21784 |
Errors creating JSDLs from DWC 9.5FP1 |
IJ21991 |
The created or modified workstation task content has not been kept after leaving the query or logoff from DWC and logon again |
IJ22146 |
dbupgrade prereq check iws 9.5 fp1 docker container issue with azure paas mssql |
IJ22225 |
KNOWN DEFECT WA-80955 Plugins creates too many directories and files in dwcServer directory |
IJ22240 |
job dependency not working after confirming success on abended job |
IJ22282 |
On browser set in french language, on windows french local, DWC 9.5 fp01 monitor job streams there are missing columns |
IJ22284 |
On DWC 9.5 dwcinst -f dwcinst.properties the 2 bootstrap ports(sec) are not taken into account. but http(s) ports are ok. |
IJ22308 |
Changing job stream definition does not reflect when submit jobstream on DWC |
IJ22458 |
In DWC, workload application template replace all doesn't work |
IJ22759 |
In 9.5 FP1 DWC, in edit event rule, changing the name creates a new copy rather than renaming the target event rule |
IJ22858 |
job in error query on tws-zos engine with operator role displays only ws column with browsers in Italian |
IJ22873 |
Manage multiple event rules in DWC 9.5.0.01 does not work |
IJ23160 |
EQQX550 No variable duration or deadline was specified with z/OS engine |
IJ23878 |
create like function in DWC 9.5 is not working as expected |
IJ23879 |
AWSUI5015E error occurs when trying to edit an er on japanese environment |
APARs and defects fixed in IBM Dynamic Workload Console Fix Pack 1 for version 9.5.0
This section lists APARs and internal defects resolved by Fix Pack 1.
Table 6. APARs addressed in Fix Pack 1
APAR |
ABSTRACT |
IJ11482 |
Cannot load predecessor jobs from a backup master domain manager in Dynamic Workload Console 9.4.04. The following error message is returned: AWSUI0796E: the specified action cannot be performed. |
IJ11905 |
With Dynamic Workload Console 9.4.x, if the timezone of the Dynamic Workload Console and the engine are different, job time in job history report is incorrect. |
IJ11908 |
IBM Workload Scheduler dependencies are removed when updating a run cycle in a job stream before the final run time occurs. |
IJ12138 |
The yearly layout in run cycles is displayed in collapsed mode with Internet Explorer, v. 11. |
IJ12956 |
The search function does not return any job definitions when searching for rerun job definitions in Internet Explorer, v. 11, if a Japanese engine name is used. |
IJ13912 |
Cannot import Self-Service catalogs when there is no associate. |
IJ16230 |
FTP jobs containing wildcards in the destination name fail with error message AWKFTE037E. |
IJ16233 |
Extra backward slash "\" symbols are added each time the customer edits the event rule. |
IJ16431 |
With Dynamic Workload Console V9.4 FP05, in the submit predefined josbtream panel, the selected variable from the vartab table is overridden by the default main_table variable. |
Known limitations and workarounds
The following are software limitations and workarounds that affect Dynamic Workload Console version 9.5.0 Fix Pack 4. For a list of known problems and limitations documented for the V9.5 General Availability release, refer to the Dynamic Workload Console Release Notes.
9.5 Fix Pack 4
- Dynamic Workload Console rollback from 9.5 Fix Pack 4 to 9.5 Fix Pack 3 or previous versions of 9.5 fails on Linux and AIX
- It is not possible to perform a rollback of the Dynamic Workload Console from 9.5 Fix Pack 4 to 9.5 Fix Pack 3 or previous versions of 9.5, the followings error message appears:
WAINST015E The following command failed:
cp -r <source_directory> <target_directory>
Where <source_directory>
is the directory where the Dynamic Workload Console 9.5 Fix Pack 3 installation package has been unzipped and <target_directory>
is the directory where the Dynamic Workload Console 9.5 Fix Pack 4 is installed..
To perform the rollback, carry out the following steps:
- Delete
<DWC_INST_DIR>/java/man
directory in the 9.5 Fix Pack 4 installation directory.
- Run the command:
dwcinst.sh
again to perform the rollback from 9.5 Fix Pack 4 to 9.5 Fix Pack 3.
- Dashboard becomes unresponsive after 4 hours of inactivity
-
A dashboard that uses the bar chart, bubble chart, gauge, line chart, or pie chart widgets might become unresponsive if kept open for more than 4 hours without interaction.
Workaround: To continue working, close the dashboard and open it again.
- Cannot remove the "DRAFT" flag from schedules without "DELETE" access on jobstreams
- When trying to remove the "Draft" flag from a Jobstream using the Dynamic Workload Console, an error message stating you are not authorized to perform the action "DELETE" on an object "JobStream" appears.
The user running the commands needs to have "ADD" "DELETE" and "MODIFY" access to carry out this action.
- No error message is displayed when Dynamic Workload Console does not connect to the DB
- This error occurs when the Dynamic Workload Console is configured with an external DB. When accessing the Dynamic Workload Console while the DB is not reachable or is not running, the Dynamic Workload Console page loads but the menu does not load, no message or explanation appears. For this limitation, currently, there is no workaround or fix.
- Dynamic Workload Console not available after Windows upgrade
- To start the Dynamic Workload Console, first check the correct version logged in the Dynamic Workload Console messages.log file.
Restart Liberty on Windows using the option –clean to see the version in the log.
https://www.ibm.com/docs/en/was-liberty/base?topic=line-server-command-options
Cleans all persistent cached information that is related to the specified server instance, which includes OSGi resolver metadata and persistent OSGi bundle data. If you use this option, the server will be required to recompute any cached data at the next startup, which might take more time than a restart that can reuse cached data.
- Event-driven workload automation (EDWA) - Multi Selection Keyboard Shortcuts (shift+left/right/up/down) in explore area does not work.
- Currently there is no known workaround available.
- Audit report is generated successfully but the parameters do not group correctly. Date is shown first followed by object.
- Currently there is no known workaround available.
- Launch In Context Bookmark URL copied from Microsoft Edge Browser does not work in Safari Browser
- Currently there is no known workaround available.
- Blank right pane displayed when creating job definitions for executables and integrations from the Dynamic Workload Console (WA-98323)
- When you open the Workload Designer and try to create a new job definition for executables and integrations, the right pane of the Workload Designer might be blank. This problem does not affect native job types.
Workaround: Browse to DWC_home/usr/servers/dwcServer/apps/DWC.ear/TWSWebUI.war/plugins/job, delete all folders named plugin_ and retry the operation.
9.5 Fix Pack 3:
- File transfer jobs created or edited using the Dynamic Workload Console at Version 9.5, Fix Pack 3 are not supported on agents at Version 9.3
- Agents at Version 9.3 can run existing file transfer jobs without problems. Jobs you create or edit from the Dynamic Workload Console at Version 9.5, Fix Pack 3 are not supported on agents at Version 9.3, but you can work around this problem by saving the jobs in the composer command line after editing them with the Dynamic Workload Console. The best practice is applying the latest fix pack level to the agents.
- Dashboard becomes unresponsive after it is kept open and unused for more than 4 hours
- A dashboard that uses the widgets Bar chart, Bubble chart, Gauge, Line chart, or Pie chart might become unresponsive if it is kept open for more than 4 hours without interaction.
Workaround: To continue working, close the dashboard and open it again.
- A monitoring query that is bookmarked for an engine shared to all users works only for the engine owner
- A monitoring query that is created and bookmarked by the administrator for an engine that is shared to all users, works only for the owner of the engine. It cannot be shared.
- The edited value for the Latest Start Time is not shown in the list of critical jobs
- In the Monitor Critical Jobs page you modify the Latest Start Time of a job, but the list of critical jobs is not updated with the new value.
Workaround: To see the updated Latest Start Time of the critical job that you edited, query the list of the jobs in the current plan.
- What-if: if Web browser is set to a language other than English, a problem occurs
- From the What-if page, you select a job and click "Show impact on critical jobs": a message is issued with the list of critical successors, but the list is not updated in the related table.
- A plan different from the current is not supported by datasources
- You can define datasources only for the current plan. Archived and forecast plans are not supported.
- The Copy function is supported with Safari v13.1, or later
- Using the Copy function with Safari is available with Safari v13.1, or later.
- Problem editing event rules
- In the Manage event rule page, you can edit the event rule only once. Further editing attempts are not supported.
- Cannot open an event rule located in a folder you are not authorized to
- In the Manage event rule page, opening an event rule located in a folder which you are not authorized to access opens a blank workspace area manager in the Create event rule page.
- Problem with reports and Informix database
- If you are using an Informix database, the Show details button for the Job Duration Estimate report is not working.
- Problem with reports and MSSQL database
- If you are using an MSSQL database, the Show details button for the Standard Deviation report is not working.
9.5 Fix Pack 2:
- A duplicated datasource cannot be edited and saved
- A duplicated datasource, belonging to a shared dashboard and that retrieves data from an internal plan query, cannot be edited and saved because -after the engine selection- it lose the information contained in the query field.
Workaround: Save the query before the engine selection and paste the query in the field.
- The new SAP option fields in the editor are not available for the Dynamic Workload Console
- The following fields:
MAX_JOBS_TO_RELEASE_FOR_USER
and RELEASE_ALL_INTERCEPTED_JOBS_FOR_REQUEST
, added in the latest version of IBM Workload Scheduler, are not present in the Dynamic Workload Console SAP editor.
Workaround: Open the editor and add the field to the list.
- Widgets in dashboard with two or more engines selected, do not display correct data
- Selection of more than one engine is fully supported only when two or more engines Version 9.5 FP2 are selected, therefore when two or more engines of different versions are selected, the widgets of job and job streams do not display correct data.
- Workaround: Duplicate the dashboard, duplicate the datasources and remove the filter for folders in the query. Use the following query to include different engines to the monitor of the jobs
@#@.@
and this query for job streams @#@
- Import of Self-Service Dashboards
- After the import of the settings from a Self-Service Dashboards, only the definitions are imported.
- Query from two or more engines of different versions may be incomplete
- When monitoring jobs or job streams from two or more engines of different IBM Workload Scheduler versions, no results are displayed in the panel.
Workaround: from the monitoring panel enter the following query: @#@
- The Event Rule page shows issues for different resolutions
- The Event Rule page does not display correctly for some screen resolution.
Workaround: To display the Event Rule page correctly, either from desktop or mobile, it is suggested that you use any of the following resolutions:
- 1920X1080
- 1366X768
- 1536X864
- 768X1024
- 1280X800
- Widgets in the Default Distributed Dashboard does not retrieve data correctly from Critical Jobs datasource
- When trying to retrieve data from a critical job datasource, only critical jobs in the root folder will be retrieved.
Workaround: To retrieve critical jobs from all folders path, clone the critical jobs datasource and insert the following filters /*/*
- Problems with Critical Jobs in the Monitoring Panel
- When trying to retrieve a list of Critical Jobs from the Monitoring Panel without specifying the folders in the query, it will only return the Critical Jobs in the root folder.
Workaround: Always specify the folder in the query.
- Dynamic Workload Console erroneously replaces DOCOMMAND WITH SCRIPTNAME
- If you modify the jobs in the FINAL and FINALPOSTREPORTS job streams from the Dynamic Workload Console, after saving the changes, the Dynamic Workload Console replaces DOCOMMAND back with SCRIPTNAME.
Workaround: Only use the composer command line to replace SCRIPTNAME with DOCOMMAND in the jobs contained in the FINAL and FINALPOSTREPORTS job streams.
- IBM Z Workload Scheduler Server ABEND when connecting a Dynamic Workload Console 9.5
-
To avoid Dynamic Workload Console connection issues and an IBM Z Workload Scheduler ABEND when connecting a Dynamic Workload Console v9.5 Fix Pack 1 or later to a v9.2 or v9.3 Controller, install this APAR https://www.ibm.com/support/pages/apar/PH13139
- Issue related to the import of a Workload Application Template
- The import of a Workload Application Template from V95FP1 to V95FP2 with nested dependencies may not be working as expected, if the folders are not mapped in the V95FP2 environment.
Workaround: Before the import of the Workload Application Template, recreate the folder structure that you are importing from FP1.
- Problems when using filters
- When you have a backup master domain manager at V9.5 Fix Pack 2, but the master domain manager is still at a previous product version level, problems can occur when monitoring objects that support the definition in a folder such as, prompts, workstations, and resources, as well as objects that contain the workstation in their object identifier, for example, job streams. More specifically these objects are not displayed in the results of the monitoring query on the plan if you use filters in your query.
Workaround: Upgrade the master to the V9.5FP2 level and then run planman resynch to resolve the issue.
- Dynamic Workload Console help panels in other languages
- Some of the help panels in the Dynamic Workload Console could not be translated in the following languages: German, French, Italian, Russian, Korean, Chinese, Spanish, Japanese and Portuguese.
- Creating a job stream in the same folder from the Workload Designer (AWSUI6007E)
- When creating a job stream in the same folder with the same name but different starting date (valid from), the new job stream cannot be saved.
Workaround: Close the first job stream from the list of the Workload Designer and then save the new job streams.
- Filters in datasources of critical jobs are not supported in Z Dashboard
- Editing of filters in datasources of critical jobs are not supported for Z engine.
- A widget in a custom Dashboard is shared even though the engine connected to the related datasource is not. (WA-77928)
- When creating an engine connection, that is not shared, but with the check-box "share credentials enabled", a datasource created with that engine retrieves data on the dashboard, although the engine is not visible to the user to which that dashboard is shared.
- Folder column does not appear in Monitor Workload and modeling when connected to a engine of previous releases (WA-85339)
-
When monitoring a object in the Monitor Workload or List workload connected to a engine of the versione 9.5 Fix Pack 1, the column of folders does not appear.
Workaround: Click edit, expand the section Show Filter Criteria section and add the column manually from the section Column Definition.
9.5 Fix Pack 1:
- The actual report is not displayed in the archived plan list if a high number of archived plans is present (WA-80653)
-
- You cannot specify folders with folder names longer than 254 in the security file (WA-80894)
-
- Poor performance for Dynamic Workload Console dashboards containing both distributed and Z engines
- Using a Dynamic Workload Console dashboard containing both distributed and Z engines, might affect product performance negatively, especially on the distributed database server, leading to high CPU consumption.
Workaround: Create separate dashboards for distributed and z/OS environments.
- A communication failure could occur when removing an ACL defined on a deleted folder (WA-80991)
-
Removing an ACL defined on a deleted folder from the Dynamic Workload Console, you could receive an error message similar to the following:
"AWSUI0833E The operation could not be completed. There has been a communication failure. The internal message is: AWSJDB201E The object "acl=/FOLDER1_1/+F" cannot be locked, updated, or deleted because it is locked by user "null"."
Workaround: To remove the ACL and avoid communication issues, perform the following steps:
- Recreate the deleted folder.
- Delete the ACL defined on the folder you just recreated.
- Delete the folder.
- Actual Production Details Report output in .csv format is incomplete (WA-81024)
-
- In Actual and Planned Production Plan reports the maximum length for job stream name in the Filter Criteria tab is 16 characters (WA-81039)
-
- Dynamic Workload Console reports in a z/OS environment: Workstation Workload Summary returns the following errors when exported in .csv format (WA-80992)
-
- The Subsystem Name and Workstation Type filters are missing.
- The filter is not applied to the report contents.
- Dynamic Workload Console reports in a z/OS environment: limitations for customized report Analysis Job Duration Standard Deviation (WA-80996)
- The maximum job name length is 8 characters and wildcards in the job name are not supported.
- Dynamic Workload Console reports in a z/OS environment: Job Run Statistics filter on workstation type does not work (WA-81052)
- The filter is not applied to the report contents.
Fix Pack structure
This section describes the structure of the images contained in this Fix Pack.
Fix pack files available for IBM Workload Scheduler using FixCentral
This is the structure of the Fix Pack in IBM Fix Central:
+---9.5.0-IBM-DWC-README-FP0004.zip
|
+---9.5.0-IBM-DWC-AIX-FP0004.zip
|
+---9.5.0-IBM-DWC-LINUX390-FP0004.zip
|
+---9.5.0-IBM-DWC-LINUX_X86_64-FP0004.zip
|
+---9.5.0-IBM-DWC-WINDOWS_X86_64-FP0004.zip
|
+---9.5.0-IBM-IWS-console-container-FP0004
|
+---9.5.0-IBM-IWS-DWC_Zsystem-FP0004.tar
|
+---9.5.0-IBM-IWS_OpenShift_Server_UI_Agent_FP0004.zip
Installing the Fix Pack
This section describes how to apply Fix Pack 4 to Dynamic Workload Console.
Before starting the installation, verify that:
- The Dynamic Workload Console is active.
- No user is connected to the Dynamic Workload Console to prevent the data related to their working session from being lost.
This section is divided into the following subsections:
Installation notes
Read this section thoroughly before installing this Fix Pack.
- Before installing the Fix Pack, ensure you have installed the required prerequisite software. To obtain the latest information about software requirements for IBM Workload Scheduler, run the Software Requirements report and browse to the relevant section.see IBM Workload Scheduler Release Notes.
- On UNIX systems only: Before installing either the Dynamic Workload Console version 9.5 or this Fix Pack, make sure that umask is set to 022. To verify that umask is set to the correct value, from a command prompt, run the umask command. If the value is different from 022, modify it by running the command:
umask 022
- If you plan to connect the Dynamic Workload Console version 9.5 Fix Pack 1 to a z/OS engine, ensure the following APAR for the z/OS platform is installed if you plan to use the two new columns in the DB2 reports (SUBSYSTEM NAME and WORKSTATON TYPE):
- PH12689
- Support for multiple controller for DB2 reporting and new keywords added to JOBREC statement.
Interoperability notes
Dynamic Workload Console version 9.5.0 Fix Pack 4 supports all product versions indicated in the Dynamic Workload Console version 9.5 Release Notes which can be accessed at the following link: Dynamic Workload Console Release Notes.
Installation methods
When you install the Fix Pack, the installation path varies depending on the version level you have currently installed:
If necessary, you can also return to a previous product version level, as described in Returning the Dynamic Workload Console to a previous product version level in Planning and Installation Guide.
Disk space requirements
Before starting the Fix Pack installation, ensure that you have the following space available in the file system. The values indicated in the table show the disk space required by the Dynamic Workload Console alone. For the disk space required by other components, see the relevant documentation.
To obtain the latest information about permanent disk space requirements when installing IBM Workload Scheduler on supported operating systems, run the Hardware requirements report and click on the relevant operating system link
Table 7. Disk space requirements for installing a Dynamic Workload Console Fix Pack
Operating System |
Installation directory |
Temporary directory |
AIX® |
2 GB |
800 MB |
Linux s390x |
2 GB |
800 MB |
Linux x86-64 |
2 GB |
800 MB |
Windows 64 |
2,5 GB |
1 GB |
Note: In addition to the above disk space, the installation requires further 579 MB on /usr
file system.
If the installation fails because of lack of free disk space, you must stop the installation, free space on your disk, and start the installation again.
Documentation updates for IBM Dynamic Workload Console Fix Pack 4, version 9.5.0
Any additions or changes to the documentation as a result of this Fix Pack have been integrated into the online product documentation available in IBM Knowledge Center.
Documentation updates for IBM Dynamic Workload Console Fix Pack 3, version 9.5.0
Any additions or changes to the documentation as a result of this Fix Pack have been integrated into the online product documentation available in IBM Knowledge Center.
Documentation updates for IBM Dynamic Workload Console Fix Pack 2, version 9.5.0
Any additions or changes to the documentation as a result of this Fix Pack have been integrated into the online product documentation available in IBM Knowledge Center.
Documentation updates for IBM Dynamic Workload Console Fix Pack 1, version 9.5.0
Any additions or changes to the documentation as a result of this Fix Pack have been integrated into the online product documentation available in IBM Knowledge Center.
Contacting IBM Software Support
Before contacting IBM Software Support with a problem, refer to the IBM Software Support site by accessing the following Web address: http://www.ibm.com/software/support
To access IBM support, click the IBM support link at the bottom right of the page.
If you want to contact IBM Software Support, see the IBM Software Support Handbook at the following Web site: http://techsupport.services.ibm.com/guides/handbook.html
The guide provides information about how to contact IBM Software Support, depending on the severity of your problem, and the following information:
- Registration and eligibility.
- Telephone numbers, depending on the country in which you are located.
- Information you must have before contacting IBM Software Support.
Notices
This information was developed for products and services offered in the US. This material might be available from IBM in other languages. However, you may be required to own a copy of the product or product version in that language in order to access it.
IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service.
IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive, MD-NC119
Armonk, NY 10504-1785
US
For license inquiries regarding double-byte character set (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to:
Intellectual Property Licensing
Legal and Intellectual Property Law
IBM Japan Ltd.
19-21, Nihonbashi-Hakozakicho, Chuo-ku
Tokyo 103-8510, Japan
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.
Any references in this information to non-IBM websites are provided for convenience only and do not in any manner serve as an endorsement of those websites. The materials at those websites are not part of the materials for this IBM product and use of those websites is at your own risk.
IBM may use or distribute any of the information you provide in any way it believes appropriate without incurring any obligation to you.
Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact:
IBM Director of Licensing
IBM Corporation
North Castle Drive, MD-NC119
Armonk, NY 10504-1785
US
Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee.
The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us.
The performance data discussed herein is presented as derived under specific operating conditions. Actual results may vary.
Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products.
This information is for planning purposes only. The information herein is subject to change before the products described become available.
This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to actual people or business enterprises is entirely coincidental.
COPYRIGHT LICENSE:
This information contains sample application programs in source language, which illustrate programming techniques on various operating platforms. You may copy, modify, and distribute these sample programs in any form without payment to IBM, for the purposes of developing, using, marketing or distributing application programs conforming to the application programming interface for the operating platform for which the sample programs are written. These examples have not been thoroughly tested under all conditions. IBM, therefore, cannot guarantee or imply reliability, serviceability, or function of these programs. The sample programs are provided "AS IS", without warranty of any kind. IBM shall not be liable for any damages arising out of your use of the sample programs.
© (IBM) (2020).
Portions of this code are derived from IBM Sample Programs.
© Copyright IBM Corp. _2020_.
Trademarks
IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.
Adobe™, the Adobe logo, PostScript™, and the PostScript logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States, and/or other countries.
IT Infrastructure Library™ is a Registered Trade Mark of AXELOS Limited.
Linear Tape-Open™, LTO™, the LTO Logo, Ultrium™, and the Ultrium logo are trademarks of HP, IBM Corp. and Quantum in the U.S. and other countries.
Intel™, Intel logo, Intel Inside™, Intel Inside logo, Intel Centrino™, Intel Centrino logo, Celeron™, Intel Xeon™, Intel SpeedStep™, Itanium™, and Pentium™ are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
Linux™ is a registered trademark of Linus Torvalds in the United States, other countries, or both.
Microsoft™, Windows™, Windows NT™, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both.
![Java Logo](javcomp.gif) |
Java™ and all Java-based trademarks and logos are trademarks or registered trademarks of Oracle and/or its affiliates. |
Cell Broadband Engine™ is a trademark of Sony Computer Entertainment, Inc. in the United States, other countries, or both and is used under license therefrom.
ITIL™ is a Registered Trade Mark of AXELOS Limited.
UNIX™ is a registered trademark of The Open Group in the United States and other countries.
Terms and conditions for product documentation
Permissions for the use of these publications are granted subject to the following terms and conditions.
Applicability
These terms and conditions are in addition to any terms of use for the IBM website.
Personal use
You may reproduce these publications for your personal, noncommercial use provided that all proprietary notices are preserved. You may not distribute, display or make derivative work of these publications, or any portion thereof, without the express consent of IBM.
Commercial use
You may reproduce, distribute and display these publications solely within your enterprise provided that all proprietary notices are preserved. You may not make derivative works of these publications, or reproduce, distribute or display these publications or any portion thereof outside your enterprise, without the express consent of IBM.
Rights
Except as expressly granted in this permission, no other permissions, licenses or rights are granted, either express or implied, to the publications or any information, data, software or other intellectual property contained therein.
IBM reserves the right to withdraw the permissions granted herein whenever, in its discretion, the use of the publications is detrimental to its interest or, as determined by IBM, the above instructions are not being properly followed.
You may not download, export or re-export this information except in full compliance with all applicable laws and regulations, including all United States export laws and regulations.
IBM MAKES NO GUARANTEE ABOUT THE CONTENT OF THESE PUBLICATIONS. THE PUBLICATIONS ARE PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE.
[{"Type":"MASTER","Line of Business":{"code":"LOB45","label":"Automation"},"Business Unit":{"code":"BU059","label":"IBM Software w\/o TPS"},"Product":{"code":"SSGSPN","label":"IBM Workload Scheduler"},"ARM Category":[{"code":"a8m0z0000008ZuOAAU","label":"Fixpacks"}],"ARM Case Number":"","Platform":[{"code":"PF002","label":"AIX"},{"code":"PF012","label":"IBM i"},{"code":"PF016","label":"Linux"},{"code":"PF027","label":"Solaris"},{"code":"PF033","label":"Windows"}],"Version":"9.5.0"}]