PH33178: CMAS ASRA S0C1 IN METHOD XDCR AFTER EYUDREP FULL CONDITION

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• You are adding or updating definitions in you CPSM CICSPlex
  environment. Your CMAS produces an SVC dump, and the following
  messages appear in the CMAS job output:
  EYUXL0900I   Starting Environment Recovery
  EYUXL0905E cmasid  ASRA IN XDCR, OFFSET ????????
             PSW=07850000 80000002
  EYUXL0905E INTC=0001 ILC=2 TXCP=69F9F401 SCODE=S00C1
             TRAN=XDNR TASK=0012345
  EYUXL0905E Methods=XDCR,XDSG,TAAC,XLSD,XLSI,MOMS,XDH2,XDNR,
  EYUXL0905E Methods=XLOP
  EYUXL0905E BEAR=203548DC, OFFSET=????????
  
  EYUXL0906I Registers at ABEND
  EYUXL0907I GPR0-GPR1  00000000_20A0FF68  00000000_20A0E4E0
  EYUXL0907I GPR2-GPR3  00000000_00000004  00000000_203535C8
  EYUXL0907I GPR4-GPR5  00000000_1FECAE00  00000000_1FEB9700
  EYUXL0907I GPR6-GPR7  00000000_20CD7E40  00000000_20A0E010
  EYUXL0907I GPR8-GPR9  00000000_000C0000  00000000_20353588
  EYUXL0907I GPRA-GPRB  00000000_1FEB8500  00000000_203545C8
  EYUXL0907I GPRC-GPRD  00000000_20A0C560  00000000_20A0E010
  EYUXL0907I GPRE-GPRF  FF000070_00000000  00000000_1FDEB610
  Notice the PSW points to low core, and the value in 32-bit
  portion of register 14 is 00000000. The BEAR address will point
  to a BR instruction in the generated exit code at label
  DRCR_PRODUCE_TRACE.
  The list of methods in TASK view of the abending task, seen by
  VERBX EYU9D### 'TASKS,JOB=cmasjob'
  looks like this:
  Kernel linkage summary for component - DAT / Data Definition
    Task Meth
   12345 XLOP
   12345 XDNR
   12345 XDH2
   12345 MOMS
   12345 XLSI
   12345 XLSD
   12345 TAAC
   12345 XDSG
   12345 XDCR
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: All CICS CPSM users                          *
  ****************************************************************
  * PROBLEM DESCRIPTION: When writing to the repository and      *
  *                      encountering it being full the CMAS     *
  *                      branches to low storage and issues an   *
  *                      ABEND S0C1 with a PSW address of 2.     *
  *                                                              *
  *                      The msg "EYUXD0011S (applid) The Data   *
  *                      Repository is full, all further         *
  *                      modifications will fail. The Repository *
  *                      must be expanded." may be produced.     *
  *                                                              *
  *                      The job writing to the REPOSITORY ends  *
  *                      with return code 8 and a code of        *
  *                      EXCEPTION.                              *
  ****************************************************************
  * RECOMMENDATION: All CMASs should be restarted to apply the   *
  *                 fix. The restarts do not need to occur at    *
  *                 the same time, and can occur in any order.   *
  ****************************************************************
  Due to bad code in EYU0XDCR which incorrectly enters a
  subroutine without the correct linkage. The subroutine branches
  back to low storage and ABENDs S0C1.
  

Problem conclusion

• EYU0XDCR has been updated to correct the subroutine linkage.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  UI73697 UI73698

Modules/Macros

• EYU0XDCR
  

Fix information

• Fixed component name

  CICS TS Z/OS V5

• Fixed component ID

  5655Y0400

Applicable component levels

• R20M PSY UI73698

     UP21/02/02 P F102  

• R30M PSY UI73697

     UP21/02/02 P F102  

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.