A fix is available
APAR status
Closed as program error.
Error description
This APAR allows HPIC V3.1 ( v310 310 ) to support the IMS V9.1 ( v910 910 ) maintenance below: UK16668/PK25717 UK19293/PK32035 UK19612/PJ33060 UK22428/PK37916
Local fix
No Work Around
Problem summary
**************************************************************** * USERS AFFECTED: All IMS High Performance Image Copy for z/OS * * Version 3 Release 1 users ( FMID=H1J0310 ) * **************************************************************** * PROBLEM DESCRIPTION: This APAR includes following IMS APARs: * * - IMS V9 * * PK25717, PK32035, PK33060, PK37916 * * * * This APAR includes following APAR of * * HPIC V3R2: * * - PK13450 * * * * Also, this APAR fixes following * * problem: * * - HPIC Recovery function terminates * * with ABENDS0C4 ( ABEND0C4 ) when * * issues DBRC command 'GENJCL.RECOV'. * **************************************************************** * RECOMMENDATION: Apply the maintenance for this APAR. * **************************************************************** This APAR includes following IMS APARs: PK25717 (IMS V9) - HPIC recovery function issues message DFS0792A ( MSGDFS0792A ) and terminates with RC=8 when HPIC attempts forward recovery with the USEDBDS option. HPIC does not permit the output data set to contain data before applying change accumulation or log data when the input image copy is not provided. PK32035 (IMS V9) - The open error message DFS0730I A,10,09 was issued because with Online Reorg active, the target data set was opened in UPDATE mode when it should have been opened in LOAD mode. PK25717 changed DFSURDB0 such that if there is no image copy as input to DB Recovery, the target data set will be opened in UPDATE mode. It should have also checked to make sure OLR is not active before opening in UPDATE mode. Whenever OLR is active, the target data set must be opened in LOAD mode. PK33060 (IMS V9) - DFSURDB0 calls open close in load mode to format the output dataset of an OLR. The formatting does not include the partition ID and reorg number. This causes DFS0730I reason I,65 to be issued when DFSURDB0 next calls open close in UPDATE mode because the partition ID and Reorg number in the second CI of the dataset are both zero and DFSDDUI0 fails the open call. PK37916 (IMS V9) - PK28483 fixed a data set open problem when user specified a non-zero BLKSIZE in the JCL that was less than the record size. In the event the BLKSIZE is less than LRECL, PK28483 sets BLKSIZE equal to LRECL. The apar overlooked the special case of BLKSIZE=0, which indicates the system will determine the most efficient block size. Consequently, specifying BLKSIZE=0 resulted in an image copy data set with one record per block, instead of the system-determined blocksize. Not specifying BLKSIZE in the JCL has the same effect as specifying BLKSIZE=0. This APAR includes following APAR of HPIC V3R2: PK13450 - The HPIC Image Copy function terminates with RC=8 and the message IEC141I ( S013-20 ), when the image copy data set is allocated by JCL that is specified BLKSIZE smaller than LRECL of image copy data set calculated internally. Because the HPIC opened the image copy data set using BLKSIZE specified on JCL. Also, this APAR fixes following problem: - HPIC Recovery function terminates with ABENDS0C4 ( ABEND0C4 ) when issues DBRC command 'GENJCL.RECOV'. Because HPIC misses setting the address of parameter area for DBRC module.
Problem conclusion
FABJRDB9 has been modified to include the following IMS fixes: - PK25717 - PK32035 - PK33060 FABJDOPN has been modified to use the system determined BLKSIZE, when BLKSIZE smaller than LRECL of image copy data set calculated internally is specified on JCL. Also, FABJDOPN has been modified to include the IMS fix PK37916. FABJDBRC has been modified to set correct address of parameter area for DBRC module. The following modules have been reassembled. FABJDBR7 FABJDBR8 FABJDBR9
Temporary fix
Comments
APAR Information
APAR number
PK41105
Reported component name
IMS HP IMAGE CO
Reported component ID
5655K9600
Reported release
310
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2007-03-13
Closed date
2007-03-22
Last modified date
2007-04-01
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
Modules/Macros
FABJDBRC FABJDBR7 FABJDBR8 FABJDBR9 FABJDOPN FABJRDB9
Fix information
Fixed component name
IMS HP IMAGE CO
Fixed component ID
5655K9600
Applicable component levels
R310 PSY UK23265
UP07/03/24 P F703
Fix is available
Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.
[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG19M","label":"APARs - z\/OS environment"},"Platform":[{"code":"PF054","label":"z Systems"}],"Version":"310","Line of Business":{"code":"","label":""}}]
Document Information
Modified date:
14 December 2020