Download
Abstract
IBM SmartCloud Orchestrator 2.3.0.1_iFix003 has been made generally available and contains fixes to version 2.3.0.1 including all predecessor fixes.
Download Description
Sections | Description | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
The Change history section provides an overview on what is new in this release with a description of any new functions or enhancements when applicable. |
||||||||||||
The How critical is this fix section provides information related to the impact of this release to allow you to assess how your environment may be affected. |
||||||||||||
The Prerequisites section provides important information to review prior to the installation of this release. |
||||||||||||
The Download package section provides the direct link to obtain the download package for installation in your environment. |
||||||||||||
The Installation instructions section provides the installation instructions necessary to apply this release into your environment. |
||||||||||||
The Known side effects section contains a link to the known problems (open defects) identified at the time of this release. |
IBM SmartCloud Orchestrator Fix Pack 1 (2.3.0.1) for 2.3 must be installed before applying this iFix. IMPORTANT: Before applying this iFix, ensure that all the vCenter clusters in the VMware regions are set DRS enabled, which means that the DRS function is opened and set to automatically; otherwise, IBM SmartCloud Orchestrator will fail to manage the VMs previously deployed in that cluster. |
Review the Software prerequisites page in the IBM Knowledge Center to ensure your environment meets the minimum hypervisor and operating system requirements, especially if you are upgrading from a previous release of IBM Cloud Orchestrator. |
Installation Instructions
Tab navigation
- Introduction- selected tab,
- Standard upgrade
- Manual upgrade
Select the Standard tab for upgrade instructions using the iFix installation script.
Select the Manual tab for the instructions on how to manually upgrade each component.
Important Notice: Ensure your environment has met all the requirements in the Prerequisites section above before applying this iFix.
1) Stop SmartCloud Orchestrator on Central Server 1
Change to directory: /iaas/scorchestrator/
Stop SmartCloud Orchestrator: ./SCOrchestrator.py --stop
===>>> Stopping Smart Cloud Orchestrator
...
===>>> Stopping Smart Cloud Orchestrator complete
Wait until all components have stopped
2) Backup your SCO installation
Backup the Central Servers and Region Server virtual machines:
For VMware hosted virtual machines, see Taking Snaphots for information about taking snapshots of the virtual machines.
3) Copy 2.3.0.1-CSI-ISCO-IF0003.tar on Central Server 1
4) Extract 2.3.0.1-CSI-ISCO-IF0003.tar in a directory of your choice by running the following command:
tar -xf 2.3.0.1-CSI-ISCO-IF0003.tar
cd 2.3.0.1-CSI-ISCO-IF0003
The following files are extracted:
SmartCloud_Orchestrator_2.3.0.1_IF0003.fxtag
helper.py
ifix3.py
2.3.0.1-CSI-ISCO-IF0002/
-ibm-java-i386-sdk-6.0-15.1.i386.rpm
-ICCT_Install_2.3.0.1-16.zip
-java664sr15fp1.py
-sce310_jre_linux_installer.bin
-was85javasdk64-ifpi08994.py
-ibm-java-x86_64-sdk-6.0-15.1.x86_64.rpm
-java632sr15fp1.py
-sce310java664sr15fp1.py
-SmartCloud_Orchestrator_2.3.0.1_IF0002.fxtag
IT00875_SE58917
-check_sum.txt
-il_proxy_install_package_23021.zip
-smartcloud-2013.1-1.1.4.ibm.201405091705.noarch.rpm
-IFIX_IWD_SCO2301_LA006_20140602-0115-622.tar
-iwd_fix.py
-vilp23021.py
-il_install_package_23021.zip
-smartcloud20131114201405091705.py
-vils23021.py
ZZ00201
-iwd0002_0006checksum.txt
-iwd0002_0006.py
-opt/ibm/rainmaker/purescale.app/private/expanded/ibm/maestro.util-4.0.0.1/lib/maestro.util.jar
ZZ00234
-automation.groovy
ZZ00240
-00_SCOrchestrator_Toolkit_2301_20140403_ifix1.twx
ZZ00244_ZZ00246
-plugin.com.ibm.orchestrator.rest-1.0.1.1.jar
scp-pdcollect
-Components_nonroot.xml
-Environment.xml
-Components.xml
-PDCOLLECT_Central_Server_Template.xml
ZZ00242
-config_network.sh
SE59389
-se59389_fix.py
-se59389_fix.tar.gz
5) Update the 64-bit Java installation used by the Business Process Manager on Central Server 4
- Follow the instructions in security bulletin Security Bulletin: Information regarding security vulnerability in IBM SDK Java™ Technology Edition that is shipped with IBM WebSphere Application Server and addressed by Oracle CPU January 2014 to install IBM WebSphere Application Server interim fixes as appropriate for IBM WebSphere Application Server version used by Business Process Manager.
- In Security Bulletin: Multiple vulnerabilities in current IBM SDK for Java for WebSphere Application Server January 2014 CPU click on link named "PI08994" in section "For V8.5.0.0 through 8.5.5.1 Full Profile:"
- In "PI08994: SHIP SDK 626 SR7 FP1 FOR WSAS V8.5.0.X AND V8.5.5.X" you need to download the correct package (Linux+64-bit+x86+AMD/Intel+Java+SDK) by clicking the FC link which lets you download the following package:
8.5.0.0-WS-WASJavaSDK-LinuxX64-IFPI08994.zip (98.17 MB)
- When downloaded, copy 8.5.0.0-WS-WASJavaSDK-LinuxX64-IFPI08994.zip to the installation
directory of iFix 2.3.0.1-CSI-ISCO-IF0003 on Central Server 1,
<your_ifix_path>/2.3.0.1-CSI-ISCO-IF0003/2.3.0.1-CSI-ISCO-IF0002/
6) Run the iFix installation script on Central Server 1
- From the directory where you unpacked the iFix package, run the iFix installation script by using the following command:
./ifix3.py --cs2=<cs2> --cs3=<cs3> --cs4=<cs4> --rs=<regionservers> --wasa=wasadmin --wasp=passw0rd
Example: ./ifix3.py --cs2=10.10.0.12 --cs3=10.10.0.13 --cs4=10.10.0.14 --rs=10.10.0.15,10.10.0.16 --wasa=wasadmin --wasp=passw0rd
You can use ./ifix3.py -h to show the usage.
Options:
-h, --help show this help message and exit
--cs2=CS2 hostname/ip address of central server 2
--cs3=CS3 hostname/ip address of central server 3
--cs4=CS4 hostname/ip address of central server 4
--rs=RS list of hostnames/ip addresses of region servers format
server1,server2,server3,...
--wasa=WASADMIN virtual image library WAS administrator ID to be used
during the installation procedure
--wasp=WASPASSWORD virtual image library WAS administrator password
7) Upgrading the Image Construction and Composition Tool
- Review the Upgrading the Image Construction and Composition Tool topic using the standard upgrade procedure or using the silent upgrade procedure.
- In step "Download and extract the compressed file to the computer where you want to upgrade or install
the Image Construction and Composition Tool fix pack" use ICCT_Install_2.3.0.1-16.zip
Note: If you are installing the 2.3.0.1-16 build of Image Construction and Composition Tool as upgrade, read Security Bulletin: SmartCloud Orchestrator is affected by the following OpenSSL vulnerabilities (CVE-2014-0224, CVE-2014-0221, CVE-2014-0195, CVE-2014-0198, CVE-2010-5298, CVE-2014-3470, CVE-2014-0076) and perform the Remediation/Fixes.
To remove the "Enablement Bundle for Virtual Applications and System Plugins on Windows" bundle from Image Construction and Composition Tool:
- log-in to Image Construction and Composition Tool UI
- navigate thru "Images and bundles" -> "Build and manage software bundles"
- select "Enablement Bundle for Virtual Applications and System Plugins on Windows"
- click on the red "X" on the right side of the window panel"
8) Start SmartCloud Orchestrator on Central Server 1
- Stop SmartCloud Orchestrator on Central Server 1 (to enable a clean start in the following step)
Change to directory: /iaas/scorchestrator/
Stop SmartCloud Orchestrator: ./SCOrchestrator.py --stop
===>>> Stopping Smart Cloud Orchestrator
...
===>>> Stopping Smart Cloud Orchestrator complete
Wait until all components have stopped
- Start SmartCloud Orchestrator on Central Server 1
Change to directory: /iaas/scorchestrator/
Start SmartCloud Orchestrator: ./SCOrchestrator.py --start
Wait until all components have started
9) Additional manual steps required to install fix for APAR ZZ00240.
Step (1). Copy the folder ZZ00240 to a directory of your choice where the BPM brower is being run from.
Step (2). Import toolkit SCOrchestrator_Toolkit provided by this fix
Logon to IBM Process Designer with admin/$your_smartcloud_passowrd
In Process Center, select tab Toolkits and click on toolkit SCOrchestrator_Toolkit
Check that SCOrchestrator_Toolkit version 2301_20140213 is the current version
(top in the stack below "Current")
Click on Toolkits and then on Import Toolkit
In the Import Toolkit dialog, click on Browse... and select 00_SCOrchestrator_Toolkit_2301_20140403_ifix1.twx
provided with this fix and click OK
Click the Import button in dialog Import Toolkit - Will be imported - SCOrchestrator_Toolkit - 2301-20140403_ifix1
and wait for the import to be finished
Click on toolkit SCOrchestrator_Toolkit
Check that SCOrchestrator_Toolkit version 2301_20140403_ifix1 is the current version
(top in the stack below "Current")
Step (3). Upgrade dependency of toolkit SCOrchestrator_Scripting_Utilities_Toolkit
In Process Center, click on Toolkits and click on SCOrchestrator_Scripting_Utilities_Toolkit
Check that SCOrchestrator_Scripting_Utilities_Toolkit version 2301_20140226 is the current version
(top in the stack below "Current")
Click on Manage and select check box "Allow users to update toolkit" to make the toolkit editable
Click on Snapshots and click on Open in Designer
In the tree view on the left hand, right-click the yellow triangle under TOOLKITS -
SCOrchestrator_Toolkit (2301_20140213) and select "Upgrade dependency to 2301_20140403_ifix1"
Check that the dependency changed to 2301_20140403_ifix1
Step (4). Create new snapshot of toolkit SCOrchestrator_Scripting_Utilities_Toolkit
In Process Center, click on Toolkits and click on SCOrchestrator_Scripting_Utilities_Toolkit
Click on Create New Snapshot
In the Create New Snapshot dialog, type in the following snapshot name:
2301_20140403_LA0001
Optionally provide an additional description
Click on Create
Check that SCOrchestrator_Scripting_Utilities_Toolkit version 2301_20140403_LA0001 is the
current version (top in the stack below "Current")
Step (5). Upgrade dependency of toolkit SCOrchestrator_Support_IaaS_Toolkit
In Process Center, click on Toolkits and click on SCOrchestrator_Support_IaaS_Toolkit
Check that SCOrchestrator_Support_IaaS_Toolkit version 2301_20140227 is the current version
(top in the stack below "Current")
Click on Manage and select check box "Allow users to update toolkit" to make the toolkit editable
Click on Snapshots and click on Open in Designer
In the tree view on the left hand, right-click the yellow triangle under TOOLKITS -
SCOrchestrator_Toolkit (2301_20140213) and select "Upgrade dependency to 2301_20140403_ifix1"
Check that the dependency changed to 2301_20140403_ifix1
Step (6). Create new snapshot of toolkit SCOrchestrator_Support_IaaS_Toolkit
In Process Center, click on Toolkits and click on SCOrchestrator_Support_IaaS_Toolkit
Click on Create New Snapshot
In the Create New Snapshot dialog, type in the following snapshot name:
2301_20140403_LA0001
Optionally provide an additional description
Click on Create
Check that SCOrchestrator_Support_IaaS_Toolkit version 2301_20140403_LA0001 is the
current version (top in the stack below "Current")
Step (7). Upgrade dependency of toolkit SCOrchestrator_Support_vSys_Toolkit
In Process Center, click on Toolkits and click on SCOrchestrator_Support_vSys_Toolkit
Check that SCOrchestrator_Support_vSys_Toolkit version 2301_20140310 is the current version
(top in the stack below "Current")
Click on Manage and select check box "Allow users to update toolkit" to make the toolkit editable
Click on Snapshots and click on Open in Designer
In the tree view on the left hand, right-click the yellow triangle under TOOLKITS -
SCOrchestrator_Toolkit (2301_20140227) and select "Upgrade dependency to 2301_20140403_ifix1"
Check that the dependency changed to 2301_20140403_ifix1
In the tree view on the left hand, right-click the yellow triangle under TOOLKITS -
SCOrchestrator_Support_IaaS_Toolkit (2301_20140227) and select "Upgrade dependency to 2301_20140403_LA0001"
Check that the dependency changed to 2301_20140403_LA0001
Step (8). Create new snapshot of toolkit SCOrchestrator_Support_vSys_Toolkit
In Process Center, click on Toolkits and click on SCOrchestrator_Support_vSys_Toolkit
Click on Create New Snapshot
In the Create New Snapshot dialog, type in the following snapshot name:
2301_20140403_LA0001
Optionally provide an additional description
Click on Create
Check that SCOrchestrator_Support_vSys_Toolkit version 2301_20140403_LA0001 is the
current version (top in the stack below "Current")
Step (9). Upgrade dependencies of toolkit TivSAM_Integration_Toolkit
In Process Center, click on Toolkits and click on TivSAM_Integration_Toolkit
Check that TivSAM_Integration_Toolkit version 2301_20140305 is the current version
(top in the stack below "Current")
Click on Manage and select check box "Allow users to update toolkit" to make the toolkit editable
Click on Snapshots and click on Open in Designer
In the tree view on the left hand, right-click the yellow triangle under TOOLKITS -
SCOrchestrator_Toolkit (2301_20140213) and select "Upgrade dependency to 2301_20140403_ifix1"
Check that the dependency changed to 2301_20140403_ifix1
In the tree view on the left hand, right-click the yellow triangle under TOOLKITS -
SCOrchestrator_Scripting_Utilities_Toolkit (2301_20140226) and select "Upgrade dependency to 2301_20140403_LA0001"
Check that the dependency changed to 2301_20140403_LA0001
Step (10). Create new snapshot of toolkit TivSAM_Integration_Toolkit
In Process Center, click on Toolkits and click on TivSAM_Integration_Toolkit
Click on Create New Snapshot
In the Create New Snapshot dialog, type in the following snapshot name:
2301_20140403_LA0001
Optionally provide an additional description
Click on Create
Check that TivSAM_Integration_Toolkit version 2301_20140403_LA0001 is the
current version (top in the stack below "Current")
Step (11). Upgrade dependencies of process app Sample_Support_Iaas_ProcessApp
In Process Center, click on Process Apps and click on Sample_Support_Iaas_ProcessApp
Check that Sample_Support_Iaas_ProcessApp version 2301_20140305 is the current version
(top in the stack below "Current")
Click on Open in Designer
In the tree view on the left hand, right-click the yellow triangle under TOOLKITS -
SCOrchestrator_Toolkit (2301_20140213) and select "Upgrade dependency to 2301_20140403_ifix1"
Check that the dependency changed to 2301_20140403_ifix1
In the tree view on the left hand, right-click the yellow triangle under TOOLKITS -
SCOrchestrator_Support_IaaS_Toolkit (2301_20140227) and select "Upgrade dependency to 2301_20140403_LA0001"
Check that the dependency changed to 2301_20140403_LA0001
Step (12). Upgrade dependencies of process app Sample_Support_vSys_ProcessApp
In Process Center, click on Process Apps and click on Sample_Support_vSys_ProcessApp
Check that Sample_Support_vSys_ProcessApp version 2301_20140310 is the current version
(top in the stack below "Current")
Click on Open in Designer
In the tree view on the left hand, right-click the yellow triangle under TOOLKITS -
SCOrchestrator_Toolkit (2301_20140213) and select "Upgrade dependency to 2301_20140403_ifix1"
Check that the dependency changed to 2301_20140403_ifix1
In the tree view on the left hand, right-click the yellow triangle under TOOLKITS -
SCOrchestrator_Support_IaaS_Toolkit (2301_20140227) and select "Upgrade dependency to 2301_20140403_LA0001"
Check that the dependency changed to 2301_20140403_LA0001
In the tree view on the left hand, right-click the yellow triangle under TOOLKITS -
SCOrchestrator_Support_vSys_Toolkit (2301_20140310) and select "Upgrade dependency to 2301_20140403_LA0001"
Check that the dependency changed to 2301_20140403_LA0001
Step (13). Upgrade dependencies of process app TSAMITK_SampleApp
In Process Center, click on Process Apps and click on TSAMITK_SampleApp
Check that TSAMITK_SampleApp version 2301_20140305 is the current version
(top in the stack below "Current")
Click on Open in Designer
In the tree view on the left hand, right-click the yellow triangle under TOOLKITS -
SCOrchestrator_Toolkit (2301_20140213) and select "Upgrade dependency to 2301_20140403_ifix1"
Check that the dependency changed to 2301_20140403_ifix1
In the tree view on the left hand, right-click the yellow triangle under TOOLKITS -
SCOrchestrator_Scripting_Utilities_Toolkit (2301_20140226) and select "Upgrade dependency to 2301_20140403_LA0001"
Check that the dependency changed to 2301_20140403_LA0001
In the tree view on the left hand, right-click the yellow triangle under TOOLKITS -
SCOrchestrator_Integration_Toolkit (2301_20140305) and select "Upgrade dependency to 2301_20140403_LA0001"
Check that the dependency changed to 2301_20140403_LA0001
Please repeat the above described procedure for every toolkit or process application in your process centre.
Step (14). Upgrade REST endpoint in database
Logon to Central-Server-1
su - db2inst1
db2 connect to BPMDB
db2 set schema bpmuser
db2 "select guid,substr(default_value,1,29) as default_value,last_modified from lsw_env_var where name='restEndpoint'"
You should see one entry where default value is equals to https://localhost
Update this entry:
db2 "update LSW_ENV_VAR set default_value='https://<Central-Server-3-IP>' where name = 'restEndpoint' and default_value='https://localhost'"
Double-check that the update was successful:
db2 "select guid,substr(default_value,1,29) as default_value,last_modified from lsw_env_var where name='restEndpoint'"
db2 commit
db2 connect reset
Stop/Start the BPM admin server on Central-Server-4
/opt/ibm/BPM/v8.5/profiles/Node1Profile/bin/stopServer.sh SingleClusterMember1
/opt/ibm/BPM/v8.5/profiles/Node1Profile/bin/startServer.sh SingleClusterMember1
10) Apply fix for APAR ZZ00256.
If your SCO server OS locale is non-English, please perform the following steps to return the correct status of openstack services to SAAM.
On each of the SCO servers (Central-servers, region-servers and KVM compute nodes), find the file 'openstack-servicectrl.sh' in '/home/saam/' or '/home/ <yourmechid>/root/'.
(1) make a backup of openstack-servicectrl.sh
(2) edit 'openstack-servicectrl.sh',
Modify the line
CTRL_CMD="/sbin/service $SERVICE_ID"
to
CTRL_CMD="/etc/init.d/${SERVICE_ID}"
LANG=C
(3) check the output of openstack-servicectrl.sh and ensure it can get the correct status of openstack services.
For example, on central-server 2 run:
$ LANG=C /etc/init.d/openstack-keystone status
keystone (pid 2817) is running...
$ ./openstack-servicectrl.sh openstack-keystone status
root: openstack-servicectrl.sh (28621): openstack-keystone status monitor detected openstack-keystone online.
11) Apply fix for APAR SE58688 - KVM nodes going offline
KVM compute nodes are going offline and can't deply any new patterns and VMs.
This is a bug of openstack https://bugs.launchpad.net/oslo-incubator/+bug/1211338
On each kvm region server and compute node, backup the file /usr/lib/python2.6/site-packages/nova/openstack/common/rpc/impl_qpid.py
Then change it as bellow.
find the words:
{"type": "Direct"}
modify it to:
{"type": "direct"}
12) Apply fix for ZZ00242 on Central Server 1.
(1) backup file config_network.sh in $your_sco_install_media/installer/scripts/
(2) Update config_network.sh with the one in folder 2.3.0.1-CSI-ISCO-IF0003/ZZ00242
13) Apply fix for the DB2 PSIRT issue.
(1) downloading the DB2 fix pack
Address security vulnerabilities in Security Bulletin: Security vulnerabilities have been identified in IBM DB2 shipped with SmartCloud Orchestrator (CVE-2013-6747, CVE-2014-0963)
(2) Installing the DB2 fix pack on Central Server 1 and each Region Servers (if shared DB is not used)
Ensure the SCO processes have been stopped using SCOrchestrator.py stop as outlined in section III step 1 above
Note: The output of the command /iaas/scorchestrator/SCOrchestrator.py will list the servers that are running DB2. Update each of these servers, starting with central-server-1 and then moving on to each region server.
Perform following steps to install the DB2 fix.
<1> Copy the fix pack to central server 1 to a folder of your choice <db2fixpack>
<2> As user db2inst1 stop DB2 and DAS:
db2stop
/opt/ibm/db2/v10.1/das/bin/db2admin stop
<3> As user root extract and install the DB2 fix pack
cd <db2fixpack>
tar zxvf v10.1fp3a_linuxx64_server.tar.gz
cd server
./installFixPack -n -b /opt/ibm/db2/v10.1 -f db2lib
Please wait for the install to complete.
<4> Re-run the install command to verify the fix pack has been applied
./installFixPack -n -b /opt/ibm/db2/v10.1/ -f db2lib
Need to repeat the steps above on each Region Server which uses standalone DB2.
*********************************************************************************************
WARNING: If you ran the script ifix6.py as outlined on the Standard tab and it completed successfully, then most of the steps in this section can be skipped. You will need to refer to the instructions on the Standard tab for additional manual steps which still need to be executed after running the script ifix3.py.
*********************************************************************************************
----------------------------------------------------------------------------
-1. Manual steps to upgrade Java for SCO.
----------------------------------------------------------------------------
Note: the required packages can be found in folder 'SmartCloud_Orchestrator_2.3.0.1_IF0003/2.3.0.1-CSI-ISCO-IF0002/' where your extract the IFIX.
(1) Update the Java 64-bit installation on Central Server 1
- Check that the current version is Java 6 SR10:
/opt/ibm/java-x86_64-60/bin/java -fullversion
java full version "JRE 1.6.0 IBM Linux build pxa6460sr10-20111208_01 (SR10)"
- Update to Java 6 SR15 if not already installed:
yum localupdate ibm-java-x86_64-sdk-6.0-15.1.x86_64.rpm
...
Updated:
ibm-java-x86_64-sdk.x86_64 0:6.0-15.1
Complete!
- Check that the updated version is Java 6 SR15 FP1:
/opt/ibm/java-x86_64-60/bin/java -fullversion
java full version "JRE 1.6.0 IBM Linux build pxa6460sr15fp1-20140110_01 (SR15 FP1)"
(2) Update the Java 64-bit installation on Central Server 2 (used by Public Cloud Gateway)
- Check that the current version is Java 6 SR10:
/opt/ibm/java-x86_64-60/bin/java -fullversion
java full version "JRE 1.6.0 IBM Linux build pxa6460sr10-20111208_01 (SR10)"
- Copy ibm-java-x86_64-sdk-6.0-15.1.x86_64.rpm to Central Server 2,
in a directory of your choice.
- Update to Java 6 SR15 if not already installed:
yum localupdate ibm-java-x86_64-sdk-6.0-15.1.x86_64.rpm
...
Updated:
ibm-java-x86_64-sdk.x86_64 0:6.0-15.1
Complete!
- Check that the updated version is Java 6 SR15 FP1:
/opt/ibm/java-x86_64-60/bin/java -fullversion
java full version "JRE 1.6.0 IBM Linux build pxa6460sr15fp1-20140110_01 (SR15 FP1)"
(3) Update the Java 64-bit installation on Central Server 3 (used by SCUI)
- Check that the current version is Java 6 SR10:
/opt/ibm/java-x86_64-60/bin/java -fullversion
java full version "JRE 1.6.0 IBM Linux build pxa6460sr10-20111208_01 (SR10)"
- Copy ibm-java-x86_64-sdk-6.0-15.1.x86_64.rpm to Central Server 3,
in a directory of your choice.
- Update to Java 6 SR15 if not already installed:
yum localupdate ibm-java-x86_64-sdk-6.0-15.1.x86_64.rpm
...
Updated:
ibm-java-x86_64-sdk.x86_64 0:6.0-15.1
Complete!
- Check that the updated version is Java 6 SR15 FP1:
/opt/ibm/java-x86_64-60/bin/java -fullversion
java full version "JRE 1.6.0 IBM Linux build pxa6460sr15fp1-20140110_01 (SR15 FP1)"
(4) Update the Java 32-bit installation on Central Server 3 (used by IBM Workload Deployer)
- Check that the current version is Java 6 SR9 FP3:
/opt/ibm/java-i386-60/bin/java -fullversion
java full version "JRE 1.6.0 IBM Linux build pxi3260sr9fp3-20111122_05 (SR9 FP3)"
- Copy ibm-java-i386-sdk-6.0-15.1.i386.rpm to Central Server 3,
in a directory of your choice.
- Update to Java 6 SR15 if not already installed:
yum localupdate ibm-java-i386-sdk-6.0-15.1.i386.rpm
...
Updated:
ibm-java-i386-sdk.i386 0:6.0-15.1
Complete!
- Check that the updated version is Java 6 SR15 FP1:
/opt/ibm/java-i386-60/bin/java -fullversion
java full version "JRE 1.6.0 IBM Linux build pxi3260sr15fp1-20140110_01 (SR15 FP1)"
- Copy new security (unrestricted) policy files
cp /opt/ibm/java-i386-60/demo/jce/policy-files/unrestricted/*.jar /opt/ibm/java-i386-60/jre/lib/security/
(5) Update the 64-bit Java installation used by the Business Process Manager on Central Server 4
- Please follow the instructions in security bulletin "Information regarding security vulnerability in
IBM SDK Java(TM) Technology Edition that is shipped with IBM WebSphere Application Server and
addressed by Oracle CPU January 2014" to install IBM WebSphere Application Server interim fixes
as appropriate for IBM WebSphere Application Server version used by Business Process Manager
under the following link:
http://www-01.ibm.com/support/docview.wss?uid=swg21665267
- Click on the following link in section "Remediation/Fixes" named
"Install IBM WebSphere Application Server interim fixes as appropriate
for your current IBM WebSphere Application Server version as described in
Security Bulletin: Multiple vulnerabilities in current IBM SDK for
Java for WebSphere Application Server January 2014 CPU"
http://www.ibm.com/support/docview.wss?uid=swg21663938
- In "Security Bulletin: Multiple vulnerabilities in current IBM SDK for Java for
WebSphere Application Server January 2014 CPU" click on link named "PI08994"
in section "For V8.5.0.0 through 8.5.5.1 Full Profile:"
http://www-01.ibm.com/support/docview.wss?uid=swg24036965
- In "PI08994: SHIP SDK 626 SR7 FP1 FOR WSAS V8.5.0.X AND V8.5.5.X" you need to download
the correct package (Linux+64-bit+x86+AMD/Intel+Java+SDK) by clicking the FC link
which lets you download the following package:
8.5.0.0-WS-WASJavaSDK-LinuxX64-IFPI08994.zip (98.17 MB)
- When downloaded, copy 8.5.0.0-WS-WASJavaSDK-LinuxX64-IFPI08994.zip to the Central Server 4,
in a directory of your choice.
- Check that the current version is Java 6 SR5 IFX:
/opt/ibm/BPM/v8.5/java/jre/bin/java -fullversion
java full version "JRE 1.6.0 IBM Linux build pxa6460_26sr5ifx-20130301_01 (SR5)"
- Make sure Business Process Manager is stopped on Central Server 4
by running the following command:
service bpm status
root: bpm-dmgr (14603): ::: bpm-dmgr status monitor detected bpm-dmgr OFFLINE.
root: bpm-node (14624): ::: bpm-node status monitor detected bpm-node OFFLINE.
root: bpm-server (14645): ::: bpm-server status monitor detected bpm-server OFFLINE.
- Stop Business Process Manager on Central Server 4 if not already stopped
by running the following command (wait for services to stop and confirm with
service bpm status afterwards):
service bpm stop
- Update to SR7 FP1, if not already installed, by installing the
BPM WAS Java patch 8.5.0.0-WS-WASJavaSDK-LinuxX64-IFPI08994.zip
/opt/IBM/InstallationManager/eclipse/tools/imcl install 8.5.0.0-WS-WASJavaSDK-LinuxX64-IFPI08994
-installationDirectory /opt/ibm/BPM/v8.5 -repositories <full path to the l5ocation of zip file>
For example, if the zip file is in /root:
/opt/IBM/InstallationManager/eclipse/tools/imcl install 8.5.0.0-WS-WASJavaSDK-LinuxX64-IFPI08994
-installationDirectory /opt/ibm/BPM/v8.5 -repositories /root/8.5.0.0-WS-WASJavaSDK-LinuxX64-IFPI08994.zip
Installed 8.5.0.0-WS-WASJavaSDK-LinuxX64-IFPI08994_8.5.0.20140204_1517 to the /opt/ibm/BPM/v8.5 directory.
- Check that the updated version is Java 6 SR7 FP1:
/opt/ibm/BPM/v8.5/java/jre/bin/java -fullversion
java full version "JRE 1.6.0 IBM Linux build pxa6460_26sr7fp1-20140110_01 (SR7 FP1)"
(6) Update the 64-bit Java installation used by SmartCloud Entry on each VMware Region Server
- Make sure SmartCloud Entry is stopped on each VMware Region Server
by running the following command:
service sce status
IBM SmartCloud Entry is stopped
- Copy sce310_jre_linux_installer.bin to the VMware Region Server,
in a directory of your choice.
- Update to Java 6 SR15 from the sce310_jre_linux_installer.bin downloaded directory:
./sce310_jre_linux_installer.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
===============================================================================
Choose Locale...
----------------
1- Deutsch
->2- English
...
CHOOSE LOCALE BY NUMBER:
===============================================================================
(created with InstallAnywhere)
-------------------------------------------------------------------------------
Preparing CONSOLE Mode Installation...
===============================================================================
Introduction
------------
InstallAnywhere will guide you through the JRE (Java Runtime Environment)
update for IBM SmartCloud Entry.
The JRE version of this update is 1.6.0-SR15 FP1.
It is strongly recommended that you quit all programs before continuing with
this installation.
Respond to each prompt to proceed to the next step in the installation. If you
want to change something on a previous step, type 'back'.
You may cancel this installation at any time by typing 'quit'.
PRESS <ENTER> TO CONTINUE:
===============================================================================
License Agreement
-----------------
Installation and use of IBM SmartCloud Entry JRE Update requires acceptance of
the following License Agreement:
International Program License Agreement
...
DO YOU ACCEPT THE TERMS OF THIS LICENSE AGREEMENT? (Y/N): Y
===============================================================================
IBM SmartCloud Entry Install Locations
--------------------------------------
The following IBM SmartCloud Entry installation locations require the JRE
version to be updated to version 1.6.0-SR15 FP1.
Select the install location to proceed with the JRE update.
->1- /opt/ibm/SCE31
ENTER THE NUMBER FOR YOUR CHOICE, OR PRESS <ENTER> TO ACCEPT THE DEFAULT::
===============================================================================
Pre-Installation Summary
------------------------
Please review the following information before continuing:
Installation folder:
/opt/ibm/SCE31
Product selected for update:
IBM SmartCloud Entry 3.1
Current JRE version:
1.6.0-SR13
Update JRE verson:
1.6.0-SR15 FP1
PRESS <ENTER> TO CONTINUE:
===============================================================================
Ready To Install
----------------
InstallAnywhere is now ready to update the JRE version of IBM SmartCloud Entry
3.1 at the following installation location:
/opt/ibm/SCE31
PRESS <ENTER> TO INSTALL:
===============================================================================
Installing...
-------------
[==================|==================|==================|==================]
[------------------|------------------|------------------|------------------]
===============================================================================
Installation Complete
---------------------
Congratulations. The IBM SmartCloud Entry JRE update installed successfully at
the following location:
/opt/ibm/SCE31
PRESS <ENTER> TO EXIT THE INSTALLER:
- Check that the updated Java version used by SmartCloud Entry is Java 6 SR15 FP1:
/opt/ibm/SCE31/jre/bin/java -fullversion
java full version "JRE 1.6.0 IBM Linux build pxa6460sr15fp1-20140110_01 (SR15 FP1)"
----------------------------------------------------------------------------
-2. Manual steps to install fix on each VMware Region Server
----------------------------------------------------------------------------
This fix is dedicated for SCO 2.3.0.1 openstack-smartcloud component.
Note: If you already install the fix '2.3.0.1-CSI-ISCO-LA0004', please skip this step.
You can check your openstack-smartcloud version with command:
$ rpm -qa|grep smartcloud
smartcloud-2013.1-1.1.4.ibm.201405091705.noarch
Step 1. copy the file 2.3.0.1-CSI-ISCO-IF0003/IT00875_SE58917/smartcloud-2013.1-1.1.4.ibm.201405091705.noarch.rpm to VMware Region Server <your path>
Step 2. on VMware Region Server, navigate to <your path> and install the fix:
$ cd <your path>
$ rpm -Uvh smartcloud-2013.1-1.1.4.ibm.201405091705.noarch.rpm
Step 3. restart openstack-smartcloud service:
service openstack-smartcloud restart
Step 4. check service openstack-smartcloud is up and running:
service openstack-smartcloud status
----------------------------------------------------------------------------
-3. Manual steps to upgrade Virtual Image Library (VIL) and VIL
distributed proxy components on Central Server 2 and each Region server.
----------------------------------------------------------------------------
Note: the required packages can be found in folder '2.3.0.1-CSI-ISCO-IF0003/IT00875_SE58917/' where your extract the IFIX.
Step 1. make sure VIL service and VIL proxy service are all stopped
(1)on Central Server 2, check vil service status by running the following command:
service vil status
If vil service is not stopped, run the following command to stop it.
service vil stop
(2)on each Region server, check vilProxy service status by running the following command:
service vilProxy status
If vilProxy service is not stopped, run the following command to stop it.
service vilProxy stop
Step 2. upgrade VIL proxy on each Region Server where it is installed:
(1)copy il_proxy_install_package_23021.zip to the Region Server, in a directory of your choice.
(2)unpack il_proxy_install_package_23021.zip into a temporary directory <your_path>:
unzip il_proxy_install_package_23021.zip -d <your_path>
(3)navigate to <your_path> and upgrade Virtual Image Library proxy by running the following script:
cd <your_path>
./install_vil.sh -proxy -vilServer <hostnameFqdn>
Where
vilServer: Specifies the fully qualified host name or the IP address of the Virtual
Image Library server (central-server-2).
If you specify the fully qualified host name of the Virtual Image Library
server, the proxy must be able to resolve that host name. If it cannot,
add the IP address and host name to /etc/hosts before installing the
proxy.
Step 3. upgrade VIL server and proxy on Central Server 2:
(1)copy il_install_package_23021.zip to Central Server 2, in a directory of your choice.
(2)unpack il_install_package_23021.zip into a temporary directory <your_path>:
unzip il_install_package_23021.zip -d <your_path>
(3)navigate to <your_path> and upgrade Virtual Image Library by running the following script:
cd <your_path>
./install_vil.sh -u wasadmin -p $smartcloud_password
Step 4. make sure VIL service and VIL proxy service are all started.
(1)on Central Server 2, check vil service status by running the following command:
service vil status
If vil service is not started, run the following command to start it.
service vil start
(2)on each Region server, check vilProxy service status by running the following command:
service vilProxy status
If vilProxy service is not started, run the following command to start it.
service vilProxy start
Step 5. Check that the updated Java version used by Virtual Image Library is Java 6 SR7 FP1:
/opt/IBM/WebSphere/AppServer/java/bin/java -fullversion
java full version "JRE 1.6.0 IBM Linux build pxi3260_26sr7fp1-20140110_01 (SR7 FP1)"
----------------------------------------------------------------------------
-4. Manual steps to apply the fixes on Central Server 3.
----------------------------------------------------------------------------
(1) Copy the following files from Cetral Server 1 to $your_folder on Central Server 3.
2.3.0.1-CSI-ISCO-IF0003/SmartCloud_Orchestrator_2.3.0.1_IF0003.fxtag
2.3.0.1-CSI-ISCO-IF0003/ZZ00234/automation.groovy
2.3.0.1-CSI-ISCO-IF0003/ZZ00244_ZZ00246/plugin.com.ibm.orchestrator.rest-1.0.1.1.jar
2.3.0.1-CSI-ISCO-IF0003/ZZ00201/opt/ibm/rainmaker/purescale.app/private/expanded/ibm/maestro.util-4.0.0.1/lib/maestro.util.jar
2.3.0.1-CSI-ISCO-IF0003/IT00875_SE58917/IFIX_IWD_SCO2301_LA006_20140602-0115-622.tar
(2) Stop IWD server on Central Server 3:
service iwd stop
(3) Inventory Tagging
cd $your_folder
cp SmartCloud_Orchestrator_2.3.0.1_IF0003.fxtag /opt/ibm/SmartCloud_Orchestrator/properties/version/ on Central-Server-3.
(if not present on Central-Server-3 create the directory)
(4) Backup the following files on Central Server 3:
mkdir -p /tmp/$your_backup
cd /tmp/$your_backup
cp --preserve /opt/ibm/rainmaker/purescale.app/private/expanded/ibm/maestro.util-4.0.0.1/lib/maestro.util.jar maestro.util.jar_ori
cp --preserve /opt/ibm/rainmaker/purescale.app/private/expanded/ibm/orchestrator.ui-4.0.0.1/app/resources/automation.groovy automation.groovy_ori
cp --preserve /drouter/ramdisk2/mnt/raid-volume/raid0/usr/servers/kernelservices/plugins/bundles/com.ibm.orchestrator.task/1.0.1.0 plugin.com.ibm.orchestrator.rest-1.0.1.1.jar plugin.com.ibm.orchestrator.rest-1.0.1.1.jar_ori
(5) Update the files on Central Server 3
cd $your_folder
cp -f maestro.util.jar /opt/ibm/rainmaker/purescale.app/private/expanded/ibm/maestro.util-4.0.0.1/lib/
cp -f automation.groovy /opt/ibm/rainmaker/purescale.app/private/expanded/ibm/orchestrator.ui-4.0.0.1/app/resources/
cp -f plugin.com.ibm.orchestrator.rest-1.0.1.1.jar /drouter/ramdisk2/mnt/raid-volume/raid0/usr/servers/kernelservices/plugins/bundles/com.ibm.orchestrator.task/1.0.1.0/
(6) Install fix IFIX_IWD_SCO2301_LA006_20140602-0115-622.tar
cd $your_folder
tar -xf IFIX_IWD_SCO2301_LA006_20140602-0115-622.tar
cd IFIX_IWD_SCO2301_LA006_20140602-0115-622
./install_fix.sh (Note: this need to be carry out in current path of install_fix.sh. For manual steps for the fix, please refer to README.txt)
(7) Start IWD server on Central Server 3:
service iwd start
----------------------------------------------------------------------------
-5. Manual steps to update pdcollect files on Central Server 1.
----------------------------------------------------------------------------
(1) Backup below files in '/iaas/pdcollect' on Central Server 1 (If you are using no-root pdcollect, please find the files in /home/<yourmechid>)
Components_nonroot.xml
Components.xml
Environment.xml
PDCOLLECT_Central_Server_Template.xml
(2) Update the files in /iaas/pdcollect with the ones in folder '2.3.0.1-CSI-ISCO-IF0003/scp-pdcollect/'
------------------------------------------------------------------------------------
-6. Manual steps to install fix for vCenter 5.5 support on each VMware Region Server.
------------------------------------------------------------------------------------
(1) Copy package '2.3.0.1-CSI-ISCO-IF0003/SE59389/se59389_fix.tar.gz' to the region server $your_folder.
(2) On VMware Region Server, extact the fix package:
cd $your_folder
tar -xf se59389_fix.tar.gz
(3) Ensure SCE service is stopped.
service sce status
If SCE service is runnning, stop it with below command.
service sce stop
(4) Backup some jar files:
cp /opt/ibm/SCE31/program/plugins/com.ibm.cfs.rest.client_3.1.0.0-201305131252.jar $your_folder/com.ibm.cfs.rest.client_3.1.0.0-201305131252.jar_orig
cp /opt/ibm/SCE31/program/plugins/com.ibm.cfs.rest.client_3.1.0.3.jar $your_folder/com.ibm.cfs.rest.client_3.1.0.3.jar_orig
(5) Update SCE jar files:
cp -pf com.ibm.cfs.rest.client_3.1.0.0-201305131252.jar /opt/ibm/SCE31/program/plugins/
cp -pf com.ibm.cfs.rest.client_3.1.0.3.jar /opt/ibm/SCE31/program/plugins/
(6) Start SCE service:
service sce start
Download Package
The following sections provide detailed information related to this release.
Click the FC link below to obtain the release from Fix Central.
How critical is this fix?
Impact | Description |
---|---|
Critical |
This is a maintenance release. It contains fixes for client-reported and internally found defects. This release also contains fixes to the following security vulnerabilities:
|
There are no known regressions to report. |
Problems Solved
Click the Fix List link in the table of contents above to review a list of the problems solved in this release. |
Known Side Effects
Review the following technotes for troubleshooting assistance: |
Open defectsReview the following list of open defects for IBM Cloud Orchestrator on the IBM Support Portal. |
Change History
No new features or functions. |
||||||||||||
Product components versions after upgrading to iFix3: OpenStack component versions:
DB2: Version 10.1 Fix Pack 3a BPM: v8.5.0.0 (BPM_Std_V85) BPM pattern type Version: 20130420-0507-031 ICCT: 2.3.0.1-16 IWD Build: SCO2301_LA006_20140602-0115-622 SCE: 3.1.0.3-201403100300 VIL: 23021 JAVA versions:
|
Click the link in the Download Options column:
Technical Support
Follow IBM Cloud Tech Support on Twitter
Review the IBM Cloud Support BLOG article Enhance your IBM Cloud Support Experience for a complete list of the different support offerings along with a brief description on the best way to use each resource to improve your experience using IBM Cloud products and services.
Forums | Communities | Documentation | Contacting Support | Helpful Hints
Problems (APARS) fixed
Was this topic helpful?
Document Information
Modified date:
05 April 2019
UID
swg24040377