A fix is available
APAR status
Closed as program error.
Error description
DB2 Admin Recover job failed when it was tring to print out the message ADB5300E: USER ABEND CODE 4038 REASON CODE 00000001 IBM0032S ONCODE=612 The CONVERSION condition was raised because a conversion error occurred when converting a character string to an arithmetic value. From entry point MSG_OUT_API at statement 9925 at compile unit offset +000002F2 at entry offset +000002F2 at address 1D595A8A.
Local fix
Follow ADB5300E Programmer response: Complete the pending changes first, or change the PCACT parameter to SUPERSEDE and re-submit the job.
Problem summary
**************************************************************** * USERS AFFECTED: Users of DB2 Administration Tool for z/OS * * who use Change Management to run or recover * * the change. * **************************************************************** * PROBLEM DESCRIPTION: The following are fixed: * * * * 1 - In DB2 Administration Tool for * * z/OS, if there are pending changes * * that modify the same or related * * objects for a current recover change, * * the recover job should fail with * * RC=8 / Return Code 8 and error * * message ADB5300E / msgadb5300e * * to prevent the change from being * * recovered. However, the recover * * job fails with RC=12 / Return Code 12 * * and the following ONCODE=612 / * * ONCODE612 error : * * * * IBM0032S ONCODE=612 The * * CONVERSION condition was * * raised a conversion error * * occurred when converting a * * character string to an * * arithmetic value. * * From entry point MSG_OUT_API * * at compile unit offset >offset< * * at entry offset >offset< at * * address >address<. * * * * 2 - In DB2 Administration Tool for * * z/OS, Version 11, Release 2, if running * * a change, after pressing ENTER on * * panel ADB2CEX1 'Run a Change', the * * message 'Processing error' is * * displayed on subsequent panel ADB25TU1 * * 'Utility Template Use'. * **************************************************************** * RECOMMENDATION: * **************************************************************** The following are fixed: 1 - In DB2 Administration Tool for z/OS, if there are pending changes that modify the same or related objects for a current recovered change, the recover job should fail with RC=8 / Return Code 8 and error message ADB5300E / msgadb5300e to prevent the change from being recovered. However, the recover job fails with RC=12 / Return Code 12 and ONCODE=612 / ONCODE612 error. 2 - In DB2 Administration Tool for z/OS, Version 11, Release 2, if running a change, after pressing ENTER on panel ADB2CEX1 'Run a Change', the message 'Processing error' is displayed on subsequent panel ADB25TU1 'Utility Template Use'.
Problem conclusion
1 - The program has been corrected to issue error message ADB5300E / msgadb5300e when submitting the recover job if there are pending changes that modify the same or related objects for the current recovered change. To recover this change successfully and set the pending changes to 'DEFINED' status, the user should set the PCACT parameter to SUPERSEDE and then re-submit the recover job. ADB5300E The pending changes action parameter (PCACT) is set to CANCEL. This prevents the change from being recovered when there are pending changes that modify the same or related objects. To recover this change and set the pending changes to DEFINED status, set the PCACT parameter to SUPERSEDE and re-submit the job (e.g. PCACT( SUPERSEDE)). Explanation: The change cannot be recovered when there are pending changes that modify the same or related objects. The pending changes action parameter (PCACT) is set to CANCEL. System action: Processing stops. User response: Complete the pending changes first, or change the PCACT parameter to SUPERSEDE. Then, resubmit the job. 2- The program has also been corrected to resolve the 'Processing error' problem on panel ADB25TU1 'Utility Template Use' when running a change in DB2 Administration Tool for z/OS, Version 11, Release 2.
Temporary fix
Comments
APAR Information
APAR number
PI48476
Reported component name
DB2 ADMIN TOOL
Reported component ID
568851500
Reported release
B10
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt
Submitted date
2015-09-10
Closed date
2015-11-18
Last modified date
2015-12-03
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
UI33094 UI33095
Modules/Macros
ADBCSRV ADB2CEX1
Fix information
Fixed component name
DB2 ADMIN TOOL
Fixed component ID
568851500
Applicable component levels
Fix is available
Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.
[{"Business Unit":{"code":"BU059","label":"IBM Software w\/o TPS"},"Product":{"code":"SSCVQTD","label":"IBM Db2 Administration Tool for z\/OS"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"11.1.0","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]
Document Information
Modified date:
03 December 2015