APAR status
Closed as program error.
Error description
Scenario: 1. Create dimensions (Distance) on geometry created from CATPart. 2. Force dimension text orientation to vertical by using Properties / Value table / Orientation. 3. Change the current standard of the drawing using File/Page Setup Result: Dimensions will switch back to horizontal orientation
Local fix
Problem summary
DIMENSIONS TEXT ORIENTATION FLIP FROM VERTICAL TO HORIZONTAL
Problem conclusion
THIS PROBLEM WILL BE FIXED ON CATIA VERSION 5 RELEASE 12 GA lev el. Incident Diagnosis DIMENSION TEXT ORIENTATION FLIP FROM VERTICAL TO HORIZONTAL Correction Explanation The orientation value of the dimension was lost during the swit ch of the standard. Answer and By-Pass This problem has been corrected on V5R12ga. .
Temporary fix
Comments
APAR Information
APAR number
HD04776
Reported component name
CATIA V5/NT/200
Reported component ID
569151000
Reported release
510
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt
Submitted date
2003-03-10
Closed date
2003-05-13
Last modified date
2003-07-17
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
Fix information
Fixed component name
CATIA V5/NT/200
Fixed component ID
569151000
Applicable component levels
R510 PSN
UP
R511 PSN
UP
[{"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Product":{"code":"SSVJ2K","label":"CATIA V5"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"510","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]
Document Information
Modified date:
17 July 2003