HD58034: PDG \ RECTANGULAR PATTERN \ ERROR DURING EDITION OF

APAR status

• Closed as program error.

Error description

• RECTANGULAR PATTERN \ ERROR DURING
  EDITION OF RECTANGULAR PATTEN WITH
  UNEQUAL SPACING.
  .
  0.Start CATIA.
  1.Open the attached CATPart.
  2.Double Click the Rectangular pattern in the tree.
  3.Edit the value of he offset of the hole located on
  the left side of the parent hole.
  -Please refer the attached word document for more
  details on this.
  4.Set this value to 20mm.
  5.Click OK.
  -Please note that the Hole has now been shifted to
  the Right of the parent hole.
  .
  This is the problem.
  .
  

Local fix

Problem summary

• PDG \ RECTANGULAR PATTERN \ ERROR DURING EDITION OF
  RECTANGULAR PATTEN WITH UNEQUAL SPACING
  RECTANGULAR PATTERN \ ERROR DURING
  EDITION OF RECTANGULAR PATTEN WITH
  UNEQUAL SPACING.
  .
  0.Start CATIA.
  1.Open the attached CATPart.
  2.Double Click the Rectangular pattern in the tree.
  3.Edit the value of he offset of the hole located on
  the left side of the parent hole.
  -Please refer the attached word document for more
  details on this.
  4.Set this value to 20mm.
  5.Click OK.
  -Please note that the Hole has now been shifted to
  the Right of the parent hole.
  .
  This is the problem.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA
  VERSION 5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE
  FIXED ON V5R17SP03.
  .
  Additional Information
  .
  The Rectangular pattern edition is now
  carried out succesfuly.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R516 PSN

     UP

• R517 PSN SP51703

     UP06/12/11 I 1000