APAR status
Closed as program error.
Error description
SCENARIO: 1. Start CATIA V5 2. Open the CATPart Workbench: Part design 3. Click Thick surface command Thick surface definition dialog box is displayed. 4. Select Surface.1 as Object to offset 5. Input 2 mm as first offset distance 6. Click OK Observation: Update error is displayed and Thick surface is not performed. Update error says Shell operator: internal error
Local fix
Problem summary
SCENARIO: 1. Start CATIA V5 2. Open the CATPart Workbench: Part design 3. Click Thick surface command Thick surface definition dialog box is displayed. 4. Select Surface.1 as Object to offset 5. Input 2 mm as first offset distance 6. Click OK Observation: Update error is displayed and Thick surface is not performed. Update error says Shell operator: internal error PROBLEM: Thick surface fails when first offset distance=2mm even though it is possible when first offset distance=1mm or 3mm.
Problem conclusion
THIS PROBLEM WILL BE FIXED ON VERSION V5R20 GA level. Additional Closure Information: INCIDENT DIAGNOSIS: Thick surface fails with Internal error message. CORRECTION EXPLANATION: The versioned correction has been done so that Thick surface can be created without any error. Re-create or Upgrade Thick surface to take benefit of this correction.
Temporary fix
Comments
APAR Information
APAR number
HD89133
Reported component name
CATIA V5 NT>XP
Reported component ID
569151000
Reported release
518
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt
Submitted date
2009-09-25
Closed date
2009-10-13
Last modified date
2009-10-13
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
Fix information
Fixed component name
CATIA V5 NT>XP
Fixed component ID
569151000
Applicable component levels
R519 PSN
UP
[{"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Product":{"code":"SSVJ2K","label":"CATIA"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"518","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]
Document Information
Modified date:
13 October 2009