A fix is available
APAR status
Closed as program error.
Error description
A discrepency in the ZPARM output when using the ADMIN TOOL Ver 11.1 and Ver 11.2 run against a DB2 Ver 11 NFM environment. Here is the example: 1) The INLISTP parm (in DSN6SPRM, default is 50) not specified in DSNTIJUZ DB2 ADMIN TOOL 11.1 --> The output shows INLISTP=0 - incorrect DB2 ADMIN TOOL 11.2 --> The output shows INLISTP=50 - correct 2) The RESTART parm (in DSN6SPRM, default is RESTART) is specified in in DSNTIJUZ DB2 ADMIN TOOL 11.1 --> The output shows RESTART - correct DB2 ADMIN TOOL 11.2 --> The output shows DEFER - incorrect The steps to generate the ZPARM is summarized as below: 1. select 'Z' - DB2 SYSTEM ADMINISTRATION in the main panel. 2. select '2Z' - MANAGE SYSTEM PARAMETERS 3. select option '1' - DISPLAY PARAMETERS/GENERATE DSNZPARM SOURCE in the System Parameters panel 4. enter 'GEN'
Local fix
n/a
Problem summary
**************************************************************** * USERS AFFECTED: Users of the DB2 Administration Tool for * * z/OS who manage system parameters. * * * **************************************************************** * PROBLEM DESCRIPTION: A discrepancy in the ZPARM output * * is found when using the GEN command * * from panel ADB2ZZMN - "System * * Parameters - System Parameters". * * Inappropriate prompt messages * * are shown on panel ADB2ZZMN * * and ADB2ZZAP. * **************************************************************** * RECOMMENDATION: * **************************************************************** A discrepancy in the ZPARM output is found when using the GEN command from panel ADB2ZZMN - "System Parameters - System Parameters" and run against a DB2 V11 NFM environment. Also, inappropriate prompt messages are shown on panel ADB2ZZMN, message "Value out of range" in STORMXAB parm and on panel ADB2ZZAP, message "Value must be one of the following: NONE,1,2,3, 98,99" in QUERY_ACCEL_OPTIONS parm. A total of nine issues are fixed in this APAR: 1- The INLISTP parm was not specified in V11.1. 2- The RESTART parm was not set correctly in V11.1, V11.2, V12.1. 3- The APPLCOMPAT parm shows unreadable code in V11.1. 4- There was prompt message "Value out of range, Enter a numeric value between 0 and 225" in STORMXAB parm in V11.1 while the value was 255. 5- The FLASHCOPY_XRCP parm is not set in V11.1. 6- The CACHEDYN_FREELOCAL is not set in V12.1. 7- There was prompt message "Value must be one of the following: NONE,1,2,3,98,99,(comma separated list of numbers) " in QUERY_ACCEL_OPTIONS on panel ADB2ZZAP in V11.2, V12.1 while the value was (1,2,3,5,6). 8- REORG_MAPPING_DATABASE shows unreadable code in V11.1, V11.2, V12.1. 9- FCCOPYDDN shows blank after GEN in V11.1, V11.2, V12.1.
Problem conclusion
Problems have been resolved.
Temporary fix
Comments
APAR Information
APAR number
PI84875
Reported component name
DB2 ADMIN TOOL
Reported component ID
568851500
Reported release
B10
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2017-07-24
Closed date
2017-10-31
Last modified date
2017-12-02
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
UI51586 UI51584 UI51585
Modules/Macros
ADB2ZZ ADB2ZZAP ADB2ZZMN ADB2ZZSP ADB2ZZVA ADB2ZZVB ADB2ZZV9
Fix information
Fixed component name
DB2 ADMIN TOOL
Fixed component ID
568851500
Applicable component levels
RB10 PSY UI51584
UP17/11/03 P F711
RB20 PSY UI51585
UP17/11/03 P F711
RC10 PSY UI51586
UP17/11/03 P F711
Fix is available
Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.
[{"Business Unit":{"code":"BU059","label":"IBM Software w\/o TPS"},"Product":{"code":"SSCVQTD","label":"IBM Db2 Administration Tool for z\/OS"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"11.1.0","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]
Document Information
Modified date:
02 December 2017