PM65229: GROWING WORKING SET STORAGE AND QUIESCE FOR CARVED STORAGE IN CUA ADDRESS SPACE

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• The working storage observed for the CUA address space continues
  to grow even after users have logged off and back on until the
  address space enters quiesce mode for carved storage and abends.
  

Local fix

• Ensure your PROC defines adequate storage for the initial
  storage allocation.
  If you suspect this problem, execute the following commands via
  SDSF:
     /F xxxxxxxx,EVERY 30:00 MAP
     /F xxxxxxxx,EVERY 30:00 STORAGE DETAIL
     /F xxxxxxxx,EVERY 30:00 FLUSH
  Review your RKLVLOG for the message KLVSD005 under the
  "extended" main storage information and note the value reported
  as TOTAL()
  If the amount is less that 90M, update your RKD2PAR(KD2SYSIN)
  with MAXIMUM(90768,X) and recycle the address space
  

Problem summary

• ****************************************************************
  * USERS AFFECTED: OMEGAMON XE for DB2 PE/DB2PM                 *
  *                 users of component:                          *
  *                 -   CUA Interface                            *
  ****************************************************************
  * PROBLEM DESCRIPTION: 1. GROWING WORKING SET STORAGE AND      *
  *                      QUIESCE FOR CARVED STORAGE IN CUA       *
  *                      ADDRESS SPACE.                          *
  *                      2. SOME INCORROUTS IN CUA PANELS        *
  *                      KD2VTBPA,KD2WGBMD,KD2VHGLD,KD2RHLKD,    *
  *                      KD2RHGLD                                *
  *                      3. ZOOM ON STORED PROCEDURE AND UDF     *
  *                      PANELS GOES TO THE LAST THREAD'S DATA   *
  *                      IN CUA                                  *
  *                                                              *
  ****************************************************************
  * RECOMMENDATION: Apply this PTF                               *
  *                                                              *
  ****************************************************************
  PROBLEM SUMMARY:
  1. INCORRECT LOGIC CAUSED DID NOT FREE TEMPORARY MEMORY
  ALLOCATION FOR TABLES.
  2. KD2VTBPA PANEL DID NOT HANDLE THE CONDITION WHEN THERE
  IS NO DATA TO DISPLAY. KD2WGBMD, KD2VHGLD, KD2RHLKD, KD2RHGLD
  DID NOT PROCESS DSG MEMBERSHIP CORRECTLY AND DISPLAYED
  INCORRECT MESSAGE.
  3. INCORRECT PROCESSING OF DATA IN STORED PROCEDURE AND UDF
  CUA PANELS DISPLAYED DATA FOR ONLY THE LAST THREAD.
  
  PROBLEM CONCLUSION:
  1. CODE WAS CHANGED TO RELEASE ALL TEMPORARY MEMORY AS SOON
  AS IT IS NO LONGER NEEDED RATHER THAN RELY ON USER LOGOFF.
  2. LOGIC OF CUA PANELS KD2WGBMD, KD2VHGLD, KD2RHLKD, KD2RHGLD
  WAS CHANGED TO PROCESS DSG MEMBERSHIP CORRECTLY. KD2VTBPA WAS
  CHANGED TO HANDLE THE CONDITION OF NO DATA TO DISPLAY.
  3. STORED PROCEDURE AND UDF CUA PANELS WERE UPDATED TO
  PERMIT A ZOOM TO ANY STORED PROCEDURE OR UDF THREAD.
  

Problem conclusion

• 1. CODE WAS CHANGED TO RELEASE ALL TEMPORARY MEMORY AS SOON
  AS IT IS NO LONGER NEEDED RATHER THAN RELY ON USER LOGOFF.
  2. LOGIC OF CUA PANELS KD2WGBMD, KD2VHGLD, KD2RHLKD, KD2RHGLD
  WAS CHANGED TO PROCESS DSG MEMBERSHIP CORRECTLY. KD2VTBPA WAS
  CHANGED TO HANDLE THE CONDITION OF NO DATA TO DISPLAY.
  3. STORED PROCEDURE AND UDF CUA PANELS WERE UPDATED TO
  PERMIT A ZOOM TO ANY STORED PROCEDURE OR UDF THREAD.
  
  KEYWORDS : CUA
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  UK81706 UK81709

Modules/Macros

• KD2$CDEC KD2$SLOP KD2@CUA2 KD2ADBAD KD2ADBCD
  KD2ALOKD KD2APROB KD2CCOND KD2DATF1 KD2JOBJ6 KD2OACOD KD2OATCD
  KD2OATC2 KD2OBACD KD2OBAC2 KD2ODATD KD2ODAT2 KD2ODISD KD2ODIS2
  KD2OFNTD KD2OFNTE KD2OFNT2 KD2OFNT3 KD2OSTTD KD2OSTTE KD2OSTT2
  KD2OSTT3 KD2OTRGD KD2OTRG2 KD2RATPD KD2REDMD KD2RHBSD KD2RHEPD
  KD2RHGLD KD2RHLKD KD2RHSDD KD2RSSSD KD2SABAR KD2SCTL  KD2SCYCL
  KD2STRC7 KD2SYSPD KD2SYSP2 KD2TATPD KD2TATTD KD2TATWD KD2TTEDD
  KD2TTLDD KD2TTSDD KD2TTSID KD2TTTSD KD2UAUPD KD2UAUTD KD2UHARD
  KD2UHCCO KD2UPAUD KD2UPLND KD2USUBD KD2UTDLW KD2UTDSC KD2UTSBP
  KD2UTSD2 KD2UTSHT KD2UTSLC KD2VBPDD KD2VCSQ6 KD2VDDP7 KD2VHBDD
  KD2VHGLD KD2VHLDD KD2VHLMD KD2VHPTD KD2VHQDD KD2VLKWD KD2VLOGM
  KD2VLOTD KD2VSQLD KD2VSTG7 KD2VTBPA KD2VTHD6 KD2VTHP7 KD2VTIIO
  KD2VTPSD KD2WGBMD KD2001
  

Fix information

• Fixed component name

  OM XE DB2PE/PM

• Fixed component ID

  5655OPE00

Applicable component levels

• R510 PSY UK81706

     UP12/09/13 P F209

• R511 PSY UK81709

     UP12/09/13 P F209

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.