A fix is available
APAR status
Closed as program error.
Error description
An unload requesting output data sets be stacked on tape (via TEMPLATE specifying STACK YES) may fails with ABEND S0C4 when the number of volumes needed to store the output files exceed 20 volumes. A typical SYMPTOM DUMP is as follows: IEA995I SYMPTOM DUMP OUTPUT 378 SYSTEM COMPLETION CODE=0C4 REASON CODE=00000011 TIME=12.52.26 SEQ=29470 CPU=0000 ASID=003C PSW AT TIME OF ERROR 077D2000 9979EF66 ILC 6 INTC 11 NO ACTIVE MODULE FOUND NAME=UNKNOWN DATA AT PSW 1979EF60 - 54564160 6006D505 90006000 AR/GR 0: 009B7E00/0007A568 1: 00000000/0007A568 2: 00000000/0007A4B4 3: 00000000/197A00D8 4: 00000000/1979FA18 5: 00000000/1979EB10 6: 00000000/0009DFFE 7: 00000000/1A35A148 8: 00000000/0009DC8C 9: 00000000/19C3BBA0 A: 00000000/19C3BB78 B: 00000000/0000DAD8 C: 00000000/80077030 D: 00000000/0007A400 E: 00000000/9979EF52 F: 00000000/19B70774 END OF SYMPTOM DUMP LSCX041 **** ERROR **** ABEND occurred in line 6580 of OTMPCAT(OTMPLAT), offset 000456 Program terminated by operating system. ABEND code = S0C4 Calling trace: Function Line Offset Context OTMPCAT(OTMPLAT) 6580 000456 RUNHCATF(IRUNH) 9293 00008E **** Non-C routine(s) **** ﾅﾅ406317(IRUNH) == "inzrunhUnload" 1606 00096E ﾅﾅ226706(IRUN) == "inzrunRunHpu" 558 000AB2 MAIN(IMAIN) 987 0017CA PB11325 ABEND0C4 ABENDS0C4 0C4 S0C4
Local fix
Problem summary
**************************************************************** * USERS AFFECTED: Users of DB2 High Performance Unload. * **************************************************************** * PROBLEM DESCRIPTION: HPU 4.1 only: An unload requesting * * output data sets be stacked on tape * * (via TEMPLATE specifying STACK YES) * * may fail with ABEND S0C4 when the * * number of volumes needed to store the * * output files exceed 20 volumes. In * * the same conditions, the unload might * * fail after issuing an IEC028I 837-8 * * message. * * A typical SYMPTOM DUMP for the S0C4 * * abend is as follows: * * IEA995I SYMPTOM DUMP OUTPUT 378 * * SYSTEM COMPLETION CODE=0C4 REASON * * CODE=00000011 * * TIME=12.52.26 SEQ=29470 CPU=0000 * * ASID=003C * * PSW AT TIME OF ERROR 077D2000 * * 9979EF66 ILC 6 INTC 11 * * NO ACTIVE MODULE FOUND * * NAME=UNKNOWN * * DATA AT PSW 1979EF60 - 54564160 * * 6006D505 90006000 * * AR/GR 0: 009B7E00/0007A568 * * 1: 00000000/0007A568 * * 2: 00000000/0007A4B4 * * 3: 00000000/197A00D8 * * 4: 00000000/1979FA18 * * 5: 00000000/1979EB10 * * 6: 00000000/0009DFFE * * 7: 00000000/1A35A148 * * 8: 00000000/0009DC8C * * 9: 00000000/19C3BBA0 * * A: 00000000/19C3BB78 * * B: 00000000/0000DAD8 * * C: 00000000/80077030 * * D: 00000000/0007A400 * * E: 00000000/9979EF52 * * F: 00000000/19B70774 * * END OF SYMPTOM DUMP * * LSCX041 **** ERROR **** * * ABEND occurred in line 6580 * * of OTMPCAT(OTMPLAT),offset 000456 * * Program terminated by * * operating system. ABEND code = S0C4 * * Calling trace: * * Function Line Offset * * Context * * OTMPCAT(OTMPLAT) 6580 000456 * * RUNHCATF(IRUNH) 9293 00008E * * **** Non-C routine(s) **** * * 406317(IRUNH) == "inzrunhUnload" * * 1606 00096E * * 226706(IRUN) == "inzrunRunHpu" * * 558 000AB2 * * MAIN(IMAIN) 987 0017CA * * Another symptom is IEC028I * **************************************************************** * RECOMMENDATION: APPLY the PTF. * **************************************************************** The otmplate module was fixed to correctly count the number of used volumes.
Problem conclusion
APPLY the PTF.
Temporary fix
Comments
APAR Information
APAR number
PM52871
Reported component name
DB2 HI PERF UNL
Reported component ID
5697F4400
Reported release
410
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt
Submitted date
2011-11-23
Closed date
2011-12-15
Last modified date
2012-01-01
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
Modules/Macros
INZUTILK
Fix information
Fixed component name
DB2 HI PERF UNL
Fixed component ID
5697F4400
Applicable component levels
R410 PSY UK74864
UP11/12/20 P F112
Fix is available
Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.
[{"Business Unit":{"code":"BU059","label":"IBM Software w\/o TPS"},"Product":{"code":"SSAUUV","label":"IBM Db2 High Performance Unload for z\/OS"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"410","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]
Document Information
Modified date:
12 February 2021