Question & Answer
Question
How to change the Supply Type for inventory in a warehouse from ONHAND to HELD?
Answer
This guide describes how the following requirement can be met:
- In a
warehouse, inventory in all zones belongs to inventory statuses with SupplyType
ONHAND.
- This is to be changed in such a way that only a single zone has
inventory as ONHAND and the inventory in the rest of the zones is changed to
SupplyType HELD.
Solution:
1. Create a new inventory status
'A' mapped to supply type ONHAND.
2. Create inventory transition rules
for the zone which needs to have inventory as ONHAND to change the inventory
status to 'A'.
3. Create a temporary inventory status mapped to supply
type HELD.
4. Change the inventory status of inventory in the zone which
needs to have inventory as ONHAND to 'A'.
5. Change all the inventory in
zones other than this zone, to the temporary inventory status.
6. Change
the supply type of all the old inventory statuses to HELD.
7. Change all
the inventory in the temporary inventory statuses back to the old inventory
status.
Pre-requisite:
All tasks should be completed. There
should be no tasks in Open, Held, Suggested or InProgress statuses (as
inventory status is stamped on the tasks).
Historical Number
HTG2353
Was this topic helpful?
Document Information
Modified date:
16 June 2018
UID
swg21562271