Troubleshooting
Problem
Front panel diagrams for the PC Server 704
Resolving The Problem
Front panel control board
- Remove the two screws.
- The board is now held in place by a pop-on/off snap.
- Hold the board by the top edge or upper corners.
- Pull it slightly toward the back of the chassis to release the snaps.
- Carefully lift it up and out of the chassis.
1. | J14, power cable to the liquid crystal display (LCD), 3-pin connector |
2. | J12, signal cable to the LCD 14-pin connector |
3. | J5, signal cable to intrusion switch at back corner above the power supplies, 3-pin connector |
4. | J11, signal cable to system board, 40-pin connector (pin 17 removed) |
5 . | J2, signal cable to intrusion switch at back corner above board cage area, 3-pin connector |
Front panel control board interface
1. | Signal from C2 switch at back edge near card cage 3-pin right-angle latching-style connector. |
2. | Power switch |
3. | Reset switch |
4. | Power-on LED, green |
5 . | Power-fail LED, amber |
6. | Cooling-fail LED, amber |
7. | Drive-fault LED, amber |
8. | Speaker |
9 . | Signal from intrusion switch at back edge near power supplies 3-pin right-angle latching-style connector |
10. | Signal interface to the LCD 14-pin straight-head connector |
11. | Power to the LCD 3-pin straight-head connector latching-style connector |
12 . | Hard drive bay C2 switch |
13. | NMI switch |
14. | Signal interface to system board 40-pin straight-head connector (pin 17 removed) |
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU02PGY","label":"Older System x->PC Server 704->8650"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
23 January 2019
UID
ibm1GKEY-3H4HNA