PQ83801: IMS V9 RUNUNDER SUPPORT FOR IMS HIGH PREFORMANCE IMAGE COPY FOR Z\OS

Obtain the fix for this APAR.

APAR status

• Closed as new function.

Error description

• IMS V9 rununder support for IMS High Preformance Image Copy for
  z\OS
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: All users of IMS High Performance Image      *
  *                 Copy for z/OS Version 3 Release 1            *
  *                 (FMID=H1J0310).                              *
  ****************************************************************
  * PROBLEM DESCRIPTION: By the maintenance provided by this     *
  *                      APAR, IMS High Performance Image Copy   *
  *                      for z/OS Version 3 Release 1 is         *
  *                      enabled to run on IMS Version 9         *
  *                      (Program Number 5655-J38).              *
  ****************************************************************
  * RECOMMENDATION: Apply the maintenance for this APAR.         *
  ****************************************************************
  IMS High Performance Image Copy for z/OS Version 3 Release 1
  has been modified so that it can run on IMS Version 9.
  
  *** Notes ***
  - When you use HASH check option for Full Function databases
    on IMS Version 9 environment, you need to apply following
    APARs to IBM IMS High Performance Pointer Checker for z/OS
    Version 2 (5655-E09):
     - PQ80186
     - PQ83453
     - PQ86664
  
  - When you use HASH check option for DEDB on IMS Version 9
    environment, you need to apply following APAR to IBM IMS
    Path Basic Tools for z/OS Version 2 (5655-E30):
     - PQ80197
  

Problem conclusion

Temporary fix

Comments

• Documentation Changes:
  The documentation is modified as follows:
   ===============================================
      IMS Image Copy Extensions for z/OS, V2R1,
      User's Guide SC18-7617-00 ( SC18761700 ).
   ===============================================
  
  PREFACE.3 Terminology Used in This Book
   To make this book easier to read, the version and release
   levels of IMS are abbreviated, as follows:
    - IMS Version 7 refers to IMS Version 7 Release 1.
    - IMS Version 8 refers to IMS Version 8 Release 1.
  | - IMS Version 9 refers to IMS Version 9 Release 1.
  
   The various versions of IMS are referred to simply as IMS,
   except where distinctions among them need to be made.
  1.0 Introduction
   1.5 Restrictions
    1.5.2 Restrictions on the Image Copy Function
      :
  | - If an HALDB is in two active sets of data sets (both A-J&X
  |   and M-V&Y) because an Online Reorganization is not
  |   completed, Image Copy function  is not able to run against
  |   them.
      :
  
  2.0 Operating Instructions
   2.2 JCL Requirements
    2.2.1 FABJMAIN JCL
     2.2.1.2 Function-Unique DD Statements for
             the HPIC Database Recovery Function
  DFSVSAMP DD
    This statement describes the data set that contains the
    buffer information required by the DL/I buffer handler.
    This DD statement is required:
  
    - If only change accumulation input is used.
    - If log input is used.
    - For recovering a VSAM ESDS with data from HISAM unload for
      the input.
    - For recovery when a null image copy data set is used for
      input.
  
    For additional information on the control statement format
    and the buffer pool structure, see:
    - IMS Version 7 Installation Volume 2:
      System Definition and Tailoring, SC26-2164.
    - IMS Version 8 Installation Volume 2:
      System Definition and Tailoring, GC27-1298.
  | - IMS Version 9 Installation Volume 2:
  |   System Definition and Tailoring.
  
    The data set can reside on tape or a direct-access device,
    or it can be routed through the input stream
    (DD * or DD DATA).
  
   2.2.3 DFSURDB0 JCL
  DFSVSAMP DD
    This statement describes the data set that contains the
    buffer information required by the DL/I buffer handler.
    This DD statement is required:
  
    - If only change accumulation input is used.
    - If log input is used.
    - For recovering a VSAM ESDS with data from HISAM unload for
      the input.
    - For recovery when a null image copy data set is used for
      input.
  
    For additional information on the control statement format
    and the buffer pool structure, see:
    - IMS Version 7 Installation Volume 2:
      System Definition and Tailoring, SC26-2164.
    - IMS Version 8 Installation Volume 2:
      System Definition and Tailoring, GC27-1298.
  | - IMS Version 9 Installation Volume 2:
  |   System Definition and Tailoring.
  
    The data set can reside on tape or a direct-access device,
    or it can be routed through the input stream
    (DD * or DD DATA).
  
  2.0 Operating Instructions
   2.3 Input
    2.3.5 ICEIN Keywords
     2.3.5.14 DDN=
    The DDN keyword specifies the database data set (DBDS)
    DD name. This keyword is valid only for a full-function
    database.
    +-----------------------------------------------------------+
    | DDN=ddname                                                |
    +-----------------------------------------------------------+
  
    where:
     ddname
       is the database data set (DBDS) DD name.
  
  |  Note:
  |    When the specified DBDS is HALDB and database is flagged
  |    as ONLINE REORG CAPABLE in DBRC, HPIC automatically
  |    determines ACTIVE DBDS and uses a active DBDS ddname as
  |    input.
  
    This keyword does not have a default.
  
    This keyword can be used in the following control statements:
        IC, AIC, CIC, ACIC, RCV, CRC
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  UQ86789

Modules/Macros

•    FABJACQG FABJARC0 FABJBLKD FABJBUF0 FABJBUF1
  FABJCMDB FABJCMP1 FABJCMP2 FABJCMP3 FABJCP40 FABJCRC0 FABJCRC1
  FABJCTCV FABJCZCV FABJDALC FABJDALO FABJDBCM FABJDBC1 FABJDBDN
  FABJDBD7 FABJDBD8 FABJDBD9 FABJDBF0 FABJDBLK FABJDBRC FABJDBR7
  FABJDBR8 FABJDBR9 FABJDMPN FABJDMP0 FABJDMP7 FABJDMP8 FABJDMP9
  FABJDOPN FABJDPSN FABJDPS7 FABJDPS8 FABJDPS9 FABJFIG1 FABJICDD
  FABJLINK FABJMAIN FABJMDPN FABJMDP7 FABJMDP8 FABJMDP9 FABJMRGE
  FABJMSGP FABJORCN FABJORC7 FABJORC8 FABJORC9 FABJPARM FABJRCHK
  FABJRCH7 FABJRCH8 FABJRCH9 FABJRDB0 FABJRDB9 FABJRPT0 FABJTGEN
  FABJUIC1 FABJXLIM FABUARCN FABUDHD8 H1J0310J
  

Fix information

• Fixed component name

  IMS HP IMAGE CO

• Fixed component ID

  5655K9600

Applicable component levels

• R310 PSY UQ86789

     UP04/04/01 P F403

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.