PM06128: SOME VTAM ISSUES

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• 1)Zooming(PF11) of Jobname does not work on stored procedures
  and user-defined functions for WLMA and RRSA commands.
  2) Zoom on IMS region in panel ZISSM displays the message:
   "No thread information for IMS control region."
   ________________ ZISSM    VTM     O2       V410./C D911
  01/15/10 18:31:03   2
  > Help PF1         Back PF3         Up PF7         Down PF8
  Zoom PF11
  ================================================================
  ===============
  >                      IMS CONNECTION DETAIL INFORMATION
  
   ISSM
  +
  +   Region   Type   Crc   Lit    Rtt       Module    Err  Psb
  Status
  +  --------  ----   ---   ----   --------  --------  ---
  --------  -----------
  +  IMSA11CR  CNTL    -    SYS1     None    DSNMIN10   R     N/A
  NOT-IN-DB2    <<== zoom
  ================================================================
  ===============
   ________________ ZNOCNTL  VTM     O2       V410./C D911
  01/15/10 18:31:39   2
  > Back PF3
  ================================================================
  ===============
  
  >     No thread information for IMS control region.
  
  ================================================================
  ===============
  3)On panel ZBACKT command BATA displays jobs which originate
  StoredProcedues and UDF threads.
  Command THDB on the same panel shows these threads as Background
  threads because of matching JOBNAME field.
  Such threads should be shown only on corresponding panels ZSTPT
  (Stored Procedures Thread Summary) and ZRRSAT(Functions Thread
  Summary).
  
  4)On panel ZBACKT thread's counter does not include 'Child'
  threads for command BATA. Zooming(PF11) of Jobname does not
  display 'Child' threads too.
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: OMEGAMON XE for DB2 PE/DB2PM                 *
  *                 users of component:                          *
  *                 -   Classic Interface                        *
  *                 -   CUA Interface                            *
  ****************************************************************
  * PROBLEM DESCRIPTION: 1. General enhancements for child       *
  *                      threads.                                *
  *                      2. Corrections for VTAM help panels     *
  *                      and incorrouts.                         *
  *                                                              *
  ****************************************************************
  * RECOMMENDATION: Apply this PTF                               *
  *                                                              *
  ****************************************************************
  PROBLEM SUMMARY:
  1. General enhancements for child threads:
  1.1. The logic was cleared/corrected for child threads
  concerning their type, displaying corrid or jobname and so on.
  1.2. Child threads for CICS and IMS were missed.
  1.3. Corrupted USERID was displayed for TSO child threads.
  
  2. Correction several problems:
  2.1. Helps for commands MENU, MENX, THDQ were missed.
  2.2. Help panels did not describe all possible threads' types.
  2.3. RRSA command did not work if the remote DB2 subsystem was
  on infoline.
  2.4. There was only one control region on panel ZISSM. Zoom on
  such region displayed the message: "No thread information for
  IMS control region."
  2.5. Program Check - Recovery Successful-CTHJ+0534, when
  displaying utility detail information.
  
  PROBLEM CONCLUSION:
  1. General enhancements for child threads:
  1.1. The logic was cleared/corrected for child threads
  concerning their type, displaying corrid or jobname and so on.
  1.2. Displaying of child threads for CICS and IMS was added.
  1.3. USERID for TSO child threads was corrected.
  
  2. Correction several problems:
  2.1. Helps for commands MENU, MENX, THDQ were added.
  2.2. Help panels were updated to describe all possible threads'
  types.
  2.3. RRSA command was corrected to work if the remote DB2
  subsystem was on infoline.
  2.4. All active IMS regions should be displayed on panel ZISSM
  and zoom on any IMS region (except control one) should work
  correctly.
  2.5. Correct utility processing.
  

Problem conclusion

• 1. General enhancements for child threads:
  1.1. The logic was cleared/corrected for child threads
  concerning their type, displaying corrid or jobname and so on.
  1.2. Displaying of child threads for CICS and IMS was added.
  1.3. USERID for TSO child threads was corrected.
  
  2. Correction several problems:
  2.1. Helps for commands MENU, MENX, THDQ were added.
  2.2. Help panels were updated to describe all possible threads'
  types.
  2.3. RRSA command was corrected to work if the remote DB2
  subsystem was on infoline.
  2.4. All active IMS regions should be displayed on panel ZISSM
  and zoom on any IMS region (except control one) should work
  correctly.
  2.5. Correct utility processing.
  
  KEYWORDS : CICS IMS USERID TSO HELP
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  PM66261 PM67027 PM67040 UK80756

Modules/Macros

•    KD2@CNTY KD2JOBJD KD2OACOD KD2OATCD KD2OATC2
  KD2OBACD KD2OBAC2 KD2OCICD KD2OIMSD KD2OIMTD KD2OIMT2 KD2OISSD
  KD2OTRGD KD2OTRG2 KD2OUDAD KD2THRAT KD2VDTDD KD2VLKWD KD2VSTOP
  KD2VTIIO KD20LKWD KO2ACKTH KO2ACKUH KO2APCBA KO2APCBS KO2APCB2
  KO2CCINB KO2CCNSA KO2CCNSS KO2CCNS2 KO2CDSYA KO2CDSYS KO2CDSY2
  KO2CIMSA KO2CIMSB KO2CIMSE KO2CIMSF KO2CIMSG KO2CISBA KO2CISBS
  KO2CISB2 KO2CTHGA KO2CTHGS KO2CTHG2 KO2CTHIA KO2CTHIS KO2CTHI2
  KO2CTHJA KO2CTHJS KO2CTHJ2 KO2CTHLA KO2CTHLS KO2CTHL2 KO2CTHMA
  KO2CTHMS KO2CTHM2 KO2CTHSA KO2CTHSS KO2CTHS2 KO2CT2IA KO2CT2IS
  KO2CT2I2 KO2CT2SA KO2CT2SS KO2CT2S2 KO2ENCLH KO2ENCUH KO2ICSTH
  KO2ICSUH KO2IMSTH KO2IMSUH KO2LLUQH KO2MENU  KO2MENX  KO2NCSTB
  KO2OCKOH KO2OCMCB KO2OCONB KO2OTHBB KO2OTHDB KO2OTHFB KO2OTHJB
  KO2OTHKB KO2OTHSB KO2OTHTB KO2OTHVB KO2OXSYB KO2OXTHB KO2PACTH
  KO2RIGTH KO2RIGUH KO2SUMMH KO2TACTH KO2TDTLH KO2THDQ  KO2UTIDH
  KO2XTHSA KO2XTHSS KO2XTHS2 KO2ZLLQT KO2ZLLUH KO2ZLOCH
  

Fix information

• Fixed component name

  OM XE DB2PE/PM

• Fixed component ID

  5655OPE00

Applicable component levels

• R410 PSY UK80756

     UP12/08/07 P F208

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.