IBM Support

PK70712: SLOW RESPONSE TIME DURING CLASSIC LOG ON AND THREAD DISPLAYS AFTER MAINTENANCE.

A fix is available

Subscribe

You can track all active APARs for this component.

 

APAR status

  • Closed as program error.

Error description

  • Slow response time during Classic logon  and thread display
    after application of latest maintenance.  Thread Display takes
    30 to 60 secs.  DSG ( Data Sharing Group ) fixes UK37808,UK37832
    and UK37871 are applied.
    
    A site might also see an increased volume of IRLM queries and
    increased use of the coupling facility ( XCF )
    

Local fix

  • Circumvention is to turn off LKUS and WTRE exception processing.
    Change them to STATE=OFF in Classic profile
    LKUS - Number of locks owned by an individual thread
    WTRE - Time thread waiting for a resource
    1.  From Classic Menu Panel (ZMENU), choose P
    2.  From ZPROF panel , choose B
    3.  From ZXTHD panel, choose exception you want turned off.
        LKUS (J) WTRE (Y) - play around to see if you need to turn
        off one or both of these exceptions.
    4.  You can set the STATE=OFF, to turn off exception for the
        current  VTAM session.
    

Problem summary

  • ****************************************************************
    * USERS AFFECTED: OMEGAMON XE for DB2 PE/DB2PM                 *
    *                 users of component                           *
    *                 - Classic Interface                          *
    *                 - CUA Interface                              *
    ****************************************************************
    * PROBLEM DESCRIPTION: Poor response during lock conflict      *
    *                      analysis. The lock conflict exceptions  *
    *                      retrieve lock data multiple times.      *
    ****************************************************************
    * RECOMMENDATION: Apply this PTF                               *
    ****************************************************************
    PROBLEM SUMMARY:
    Locking conflict exception retrieves
    lock information multiple times.
    Site may also experience higher than normal volumes of IRLM
    queries and increase coupling facility utilization.
    
    PROBLEM CONCLUSION:
    Check for lock conflict information
    only once per processing cycle.
    
    KEYWORDS: LOCKING PERFORMANCE SLOW-RESPONSE THREAD-DISPLAY
    

Problem conclusion

  • PROBLEM CONCLUSION:
    Check for lock conflict information
    only once per processing cycle.
    
    KEYWORDS: LOCKING PERFORMANCE SLOW-RESPONSE THREAD-DISPLAY
    

Temporary fix

  • *********
    * HIPER *
    *********
    

Comments

  • ×**** PE08/09/19 FIX IN ERROR. SEE APAR PK70953  FOR DESCRIPTION
    

APAR Information

  • APAR number

    PK70712

  • Reported component name

    OM XE DB2PE/PM

  • Reported component ID

    5655OPE00

  • Reported release

    410

  • Status

    CLOSED PER

  • PE

    NoPE

  • HIPER

    YesHIPER

  • Special Attention

    NoSpecatt / Xsystem

  • Submitted date

    2008-08-18

  • Closed date

    2008-08-19

  • Last modified date

    2017-02-04

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

    UK39052

Modules/Macros

  •    KO2CCAFB KO2CDINA KO2CDINS KO2CDIN2 KO2CIFAB
    KO2CIFBB KO2CIFCB KO2CIFDB KO2CIFIA KO2CIFIS KO2CIFI2 KO2CTHDA
    KO2CTHDS KO2CTHD2 KO2CTHEA KO2CTHES KO2CTHE2 KO2CTHGA KO2CTHGS
    KO2CTHG2 KO2CTHJA KO2CTHJS KO2CTHJ2 KO2CTHKA KO2CTHKS KO2CTHK2
    KO2CTHLA KO2CTHLS KO2CTHL2 KO2CTHMA KO2CTHMS KO2CTHM2 KO2CTHSA
    KO2CTHSS KO2CTHS2 KO2OROUB KO2OTH3B KO2XSY2A KO2XSY2S KO2XSY22
    

Fix information

  • Fixed component name

    OM XE DB2PE/PM

  • Fixed component ID

    5655OPE00

Applicable component levels

  • R410 PSY UK39052

       UP08/08/20 P F808 Ž

Fix is available

  • Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.

[{"Business Unit":{"code":"BU059","label":"IBM Software w\/o TPS"},"Product":{"code":"SSAV2B","label":"IBM Db2 Buffer Pool Analyzer for z\/OS"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"410","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}},{"Business Unit":{"code":"BU048","label":"IBM Software"},"Product":{"code":"SSCT4H5","label":"IBM Tivoli OMEGAMON XE for Db2 PE \/ PM \/ BPA"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"410","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]

Document Information

Modified date:
04 February 2017