A fix is available
APAR status
Closed as program error.
Error description
The DB2 Administration Tool for z/OS Batch Restart program ADBTEP2 issues a warning message ADB5256W after APAR PM94074, this APAR will amend the warning to an informational message ADB5256I and change the RC04 to RC00.
Local fix
Problem summary
**************************************************************** * USERS AFFECTED: Users of the DB2 Administration Tool for * * z/OS who use the Batch Restart program * * ADBTEP2. * **************************************************************** * PROBLEM DESCRIPTION: The DB2 Administration Tool for z/OS * * Batch Restart program ADBTEP2 returns * * RC = 4 with a warning message * * ADB5256W / msgadb5256w: * * * * ADB5256W 'The SSID parameter * * that is passed to the program is not * * recognized.' * * * * when specifying a group attachment * * name as the SSID() parameter in * * an environment where the group * * attachment name is configured but * * data sharing is not enabled. * * * * The user believes the return code * * should be 0 because the job runs * * everything successfully and the * * warning message ADB5256W / * * msgadb5256w does not provide * * enough information for them to * * understand the problem. * **************************************************************** * RECOMMENDATION: * **************************************************************** The DB2 Administration Tool for z/OS Batch Restart program ADBTEP2 returns RC = 4 with a warning message ADB5256W / msgadb5256w: ADB5256W 'The SSID parameter that is passed to the program is not recognized.' when specifying a group attachment name as the SSID() parameter in an environment where the group attachment name is configured but data sharing is not enabled. The user believes the return code should be 0 because the job runs everything successfully and the warning message ADB5256W / msgadb5256w does not provide enough information for them to understand the problem.
Problem conclusion
The following warning messages are changed from ADB5254W / msgadb5254w ADB5255W / msgadb5255w ADB5256W / msgadb5256w to information messages: ADB5254I / msgadb5254i ADB5255I / msgadb5255i ADB5256I / msgadb5256i ADB5254I The SSID parameter that is passed to the program can not be validated. The information that is used for SSID validation can not be obtained because an IFI return code return_code and a reason code reason_code occurred during execution of the -DIS GROUP DETAIL DB2 command. Explanation: The -DIS GROUP DETAIL command fails, therefore no information can be used to validate the SSID parameter. System action: Processing continues. User response: Optionally, verify that the value in the SSID parameter is correct if job fails. ADB5255I The SSID parameter that is passed to the program can not be validated. The information that is used for SSID validation is not complete in the output of -DIS GROUP DETAIL command. More information than can be displayed exists. Explanation: The maximum number of subgroup attachment groups is displayed in the output from executing the -DIS GROUP DETAIL DB2 command. More information exists but cannot be displayed. The SSID is passed to the program but is not validated. System action: Processing continues. User response: Optionally, verify that the value in the SSID parameter is correct if job fails. ADB5256I The SSID parameter that is passed to the program is not recognized as a DB2 subsystem name in a non-data sharing environment, or as a DB2 subsystem name for a member, group, or subgroup in a data sharing environment. Explanation: The SSID parameter that is passed to the program does not match one of DB2 subsystem names, group attachment name or subgroup attachment names in the output from executing the -DIS GROUP DETAIL DB2 command. The SSID problem might cause the job to fail. System action: Processing continues. User response: Optionally, verify that the value in the SSID parameter is correct if job fails. to provide a more meaningful explanation, and return code 0 / RC = 0 will be observed in the successful job instead of return code 4 / RC = 4.
Temporary fix
Comments
APAR Information
APAR number
PI21786
Reported component name
DB2 ADMIN TOOL
Reported component ID
568851500
Reported release
A10
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2014-07-10
Closed date
2014-11-12
Last modified date
2014-12-01
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
UI22964
Modules/Macros
ADBTEP2 ADB5000
Fix information
Fixed component name
DB2 ADMIN TOOL
Fixed component ID
568851500
Applicable component levels
RA10 PSY UI22964
UP14/11/14 P F411
RA20 PSY UI22965
UP14/11/14 P F411
RB10 PSY UI22966
UP14/11/18 P F411
Fix is available
Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.
[{"Line of Business":{"code":"LOB10","label":"Data and AI"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SSZJXP","label":"DB2 Tools for z\/OS"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"A10"}]
Document Information
Modified date:
31 March 2021