APAR status
Closed as Vendor Solution.
Error description
REPRODUCTION STEPS FROM L2 LAB 1. Go to Asset application 2. Create a new record Any ID, Any Description Check Liear Asset Linear Referencing Details Direction: North LRM: KILOMETERS Start Measures: 0.00 End Measures: 5.00 3. Save the Record. 4. Click on Tab Features 5. Section Features, click New row 6. Enter Feature MP and Start Measure: 0 Share with RA: tick, on Related Asset: not ticked 7. Save the record. Reproduction: Asset: EG42306 test 1 If I now create 3 different Relationships (with Use as Reference = No), my 3 Relationships will show up correctly: No 1 Source Start Measure: 0 Source End Measure:0 Relationsipt: MP, Target Asset 1001 (I see half of the Icon, which is OK) No 2 Source Start Measure: 2 Source End Measure:2 Relationsipt: MP, Target Asset 1001 (I see the whole Icon, which is OK) No 3 Source Start Measure: 5 Source End Measure:5 Relationsipt: MP,Target Asset 1001 (I see half of the Icon, which is OK) If I now create 3 different Features , 2 of the 3 Features will show up correctly: No 1 Start Measure: 0 End Measure: 0 Share wra: tick, On related asset: not ticked (I see nothing, which is NOT OK) No 2 Start Measure: 2 End Measure: 2 Share wra: tick, On related asset: not ticked (I see the whole Icon, which is OK) No 2 Start Measure: 5 End Measure: 5 Share wra: tick, On related asset: not ticked (I see half of the Icon, which is OK) Asset: EM42306 Test 2 If I now create 3 different Relationships (with Use as Reference = Yes), my 3 Relationships will show up correctly: No 1 Source Start Measure: 0 Source End Measure:0 Relationsipt: MP, Target Asset 1001 (I see half of the Icon, which is OK) No 2 Source Start Measure: 2 Source End Measure:2 Relationsipt: MP, Target Asset 1001 (I see the whole Icon, which is OK) No 3 Source Start Measure: 5 Source End Measure:5 Relationsipt: MP, Target Asset 1001 (I see half of the Icon, which is OK) If I now create 3 different Features , 2 of the 3 Features will show up correctly: No 1 Start Measure: 0 End Measure: 0 Share wra: tick, On related asset: not ticked (I see nothing, which is NOT OK) No 2 Start Measure: 2 End Measure: 2 Share wra: tick, On related asset: not ticked (I see the whole Icon, which is OK) No 2 Start Measure: 5 End Measure: 5 Share wra: tick, On related asset: not ticked (I see half of the Icon, which is OK) Action Taken: Escalate to L3 Action Plan: Wait for approval PROBLEM DESCRIPTION The Linear Asset where creating the Feature manually is not shown in the "Maximo Graphic Linear Tool". REPRODUCTION STEPS FROM CUSTOMER Steps to replicate with screenshots can be found here: https://ecurep.mainz.de.ibm.com/rest/download/42306%2C999%2C846/ 2014-09-25/42306.999.846.Problem_with_showing_Features.pdf REPRODUCTION STEPS FROM L2 LAB 1. Go to Asset application 2. Create a new record Any ID, Any Description Check Liear Asset Linear Referencing Details Direction: North LRM: KILOMETERS Start Measures: 0.00 End Measures: 5.00 3. Save the Record. 4. Click on Tab Features 5. Section Features, click New row 6. Enter Feature MP and Start Measure: 0 Share with RA: tick, on Related Asset: not ticked 7. Save the record. Reproduction: Asset: EG42306 test 1 If I now create 3 different Relationships (with Use as Reference = No), my 3 Relationships will show up correctly: No 1 Source Start Measure: 0 Source End Measure:0 Relationsipt: MP, Target Asset 1001 (I see half of the Icon, which is OK) No 2 Source Start Measure: 2 Source End Measure:2 Relationsipt: MP, Target Asset 1001 (I see the whole Icon, which is OK) No 3 Source Start Measure: 5 Source End Measure:5 Relationsipt: MP, Target Asset 1001 (I see half of the Icon, which is OK) If I now create 3 different Features , 2 of the 3 Features will show up correctly: No 1 Start Measure: 0 End Measure: 0 Share wra: tick, On related asset: not ticked (I see nothing, which is NOT OK) No 2 Start Measure: 2 End Measure: 2 Share wra: tick, On related asset: not ticked (I see the whole Icon, which is OK) No 2 Start Measure: 5 End Measure: 5 Share wra: tick, On related asset: not ticked (I see half of the Icon, which is OK) Asset: EM42306 Test 2 If I now create 3 different Relationships (with Use as Reference = Yes), my 3 Relationships will show up correctly: No 1 Source Start Measure: 0 Source End Measure:0 Relationsipt: MP, Target Asset 1001 (I see half of the Icon, which is OK) No 2 Source Start Measure: 2 Source End Measure:2 Relationsipt: MP, Target Asset 1001 (I see the whole Icon, which is OK) No 3 Source Start Measure: 5 Source End Measure:5 Relationsipt: MP, Target Asset 1001 (I see half of the Icon, which is OK) If I now create 3 different Features , 2 of the 3 Features will show up correctly: No 1 Start Measure: 0 End Measure: 0 Share wra: tick, On related asset: not ticked (I see nothing, which is NOT OK) No 2 Start Measure: 2 End Measure: 2 Share wra: tick, On related asset: not ticked (I see the whole Icon, which is OK) No 2 Start Measure: 5 End Measure: 5 Share wra: tick, On related asset: not ticked (I see half of the Icon, which is OK) ENVIRONMENT IBM Maximo Asset Management 7.5.0.5 Build 201309040937 DB Build V7503-01 IBM Maximo Linear Management 7.5.0.0 Build 20130903-1504 DB Build V7500-01 Tivoli's process automation engine 7.5.0.5 Build 20130903-1504 DB Build V7505-43 IBM Maximo Spatial Asset Management 7.5.0.1 Build 20120714-2208 DB Build V7501-13 IBM TPAE Integration Framework 7.5.1.0 Build 20130829-1209 DB Build V7510-28
Local fix
Problem summary
Problem conclusion
Temporary fix
Comments
Problem is in third-party control used for Linear Visual Control.
APAR Information
APAR number
IV68184
Reported component name
ASSETS
Reported component ID
5724R46AS
Reported release
750
Status
CLOSED ISV
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2014-12-30
Closed date
2015-09-17
Last modified date
2015-09-17
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
Fix information
Applicable component levels
[{"Business Unit":{"code":"BU059","label":"IBM Software w\/o TPS"},"Product":{"code":"SSLKT6","label":"IBM Maximo Asset Management"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"750","Edition":"","Line of Business":{"code":"LOB59","label":"Sustainability Software"}}]
Document Information
Modified date:
09 April 2023