IJ46742: CALIBRATION TOLERANCE VALUES ARE NOT UPDATING CORRECTLY.

APAR status

• Closed as program error.

Error description

• STEPS TO REPLICATE:
  
  1. Open Data Sheet Template and create New Data Sheet
  Enter a description and save
  
  2. Click New Row on Asset function section and enter 1 for Asset
  Function number and enter a description
  Calibration Point is checked
  No Adjustment Limit is checked
  Tolerance on Input is checked
  Input Min Field Resolution = 1
  Input Range from = 0.0
  Input Range to = 2000.0
  Units = DegF (or any unit)
  Output Min Field Resolution = 1
  Output Range from = 0.0
  Output Range to = 44.0
  Units = DegC (or any unit)
  Reverse Flow is checked
  Tolerance 1 Description = Out of Tolerance
  Tolerance 1 Single from = -100.0
  Tolerance 1 to = 100.0
  Tolerance 1 As = EU
  Tolerance 1 Status when exceeded = FAIL
  
  3. Calibration Point section click New Row
  Calibration Point = 1
  Enter a description of 0 = 0
  Nominal input = 0.0
  Desired output is calculated automatically as 0.0
  Save record
  
  CURRENT ERRONEOUS RESULT: You will notice the Tolerance 1 From
  value = 0.1 and the Tolerance 1 To value = 0.1. This is invalid.
  
  EXPECTED RESULT: The From value should be -0.1. Entering a 0
  value for the calibration will FAIL.
  
  Reported in Version: Maximo 7613
  Application within Maximo: Data Sheet Template
  

Local fix

• na
  

Problem summary

• ****************************************************************
  * USERS AFFECTED:                                              *
  * MAXIMO                                                       *
  ****************************************************************
  * PROBLEM DESCRIPTION:                                         *
  * CALIBRATION TOLERANCE VALUES ARE NOT UPDATING CORRECTLY      *
  ****************************************************************
  

Problem conclusion

• The fix for this APAR is contained in the following maintenance
  package: release\fix pack for Release 8.7 Product
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  MAXIMO ASST MGM

• Fixed component ID

  5724R46AM

Applicable component levels