APAR status
Closed as program error.
Error description
When the "No Adj Made?" is checked in the "Asset Function" session in the Work Order Tracking app > Data Sheet tab the "As Found Status" field is changed from Fail to Pass. STEPS TO REPRODUCE: 1) GO TO PLANNING >> DATA SHEET TEMPLATE 2) Create a new Data Sheet record .Data Sheet: DS500 .In the Asset Functions section, click New Row .Asset Function: 10 .Description: Asset Function 10 .Type: DISCRETE .Repeatable?: YES .No Adjustment Limit?: YES .In the Tolerance 1 section enter values: -Description: Asset Function 10 / Tolerance 1 -Single From: -10 -To: 10 -As: %reading -Status when Exceeded: FAIL .Scroll down until the Calibration Points tab .Click New Row button -Calibration Point: 10 -Description: Asset Function 10 / Calibration Point 10 -Set Point: 1000 .Cl ick New Row button to create a second calibration point -Calibration Point: 20 -Description: Asset Function 10 / Calibration Point 20 -Set Point: 2000 .Scroll back up to Asset functions section .Click New Row .Asset Function: 20 .Description: Asset Function 20 .Input Information section enter values: -Input Range From: 100.00 -To: 300.00 -Units: psi .Output Information section enter values: -Output Range From: 4.00 -To: 20.00 -Units: mA -Tolerance on Output?: YES .In the Tolerance 1 section enter values: -Description: Asset Function 20 / Tolerance 1 -Single From: -1.00 -To: 1.00 -As: EU -Status when Exceeded: FAIL .Scroll down until the Calibration Points tab .Click New Row button -Calibration Point: 10 -Description: Asset Function 20 / Calibration Point 10 .Nominal Input: 100.00 .Click New Row button to create a second calibration point .Calibration Point: 20 .Description: Asset Function 20 / Calibration Point 20 .Nominal Input: 200.00 .Save .Change status to APPROVED 2) GO TO >> WORK ORDERS >> WORK ORDER TRACKING .Create a new work order .Asset: CAL101 .Work Type: CAL .Click on Data Sheet tab .Associated the Data Sheets we created previously .Save the record .Change Status to Approved .In the Calibration Points tab enter values for Asset Function 10 .Calibration Point 10 .As Found Set Point 2000 only for the first line, others related lines enter 1000. .As Left Set Point 1000 .Calibration Point 20 .As Found Set Point 2000 enter the same value to all. .As Left Set Point 2000 .Save .Note that in Asset Functions section, As Found Status and As Left Status updates to FAIL and PASS respectively .Click in Asset Function 20 .On the Calibration Points tab enter values for Asset Function 20: .Calibration Point 10 .As Found Input 100.00 .As Found Output 4.00 .As Left Input 100.00 .As Left Output 4.00 .Calibration Point 20 .As Found Input 200 .As Found Output 12 .As Left Input 200 .As Left Output 12 .Save the Work Order .Note that in Asset Functions section, As Found Status and As Left Status updates to PASS .Scroll back up to Asset functions section .In the Asset Function 10 check the "No Adj Made?" box .Save .A message error pops up on the screen .OK .Check the "No Adj Made?" box again CURRENT ERRONEOUS RESULT: The "As Found Status" field changes from Fail to Pass. EXPECTED RESULT: The field should be kept as Fail Reported in Version: Maximo TPAE 7612 - Cal 761 Application within Maximo: Work Order Tracking
Local fix
na
Problem summary
**************************************************************** * USERS AFFECTED: * * Calibration users * **************************************************************** * PROBLEM DESCRIPTION: * * The No Adj Made? checkbox can be checked even when a * * calibration point is out of tolerance causing the As Found * * Status to incorrectly change from FAIL to PASS. * ****************************************************************
Problem conclusion
The fix for this APAR will be included in a future Release
Temporary fix
Comments
APAR Information
APAR number
IJ45100
Reported component name
MAXIMO ASST MGM
Reported component ID
5724R46AM
Reported release
761
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2023-01-26
Closed date
2023-02-10
Last modified date
2023-02-10
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
Fix information
Fixed component name
MAXIMO ASST MGM
Fixed component ID
5724R46AM
Applicable component levels
[{"Business Unit":{"code":"BU059","label":"IBM Software w\/o TPS"},"Product":{"code":"SSLKT6","label":"Maximo Asset Management"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"761","Line of Business":{"code":"LOB59","label":"Sustainability Software"}}]
Document Information
Modified date:
10 February 2023