APAR status
Closed as program error.
Error description
In the Graphical Assignment - Repair Facilities (GA-RF) application if the Location names have underscore characters in them, it prevents assignments from being made. Reproduced in 7.6.0.8 and 7.6.0.9 To enable repair facilities you must first go to the Organizations application and go to the "Work Order Options" from the "Select Action" menu. From there, select "Other Organization Options". Once the options are displayed, check the "Enable Repair Facilities?" check box to enable this option. In addition you may also want to check the "Bypass Site Mismatch Warning Message?" depending on whether or not you want to allow a warning to be displayed if the location is not within your current site. After enabling repair facilities to be used, you can go to the Locations application and create a repair facility by setting the type to REPAIR. In addition you'll need to check the "Is a Repair Facility?" check box. If you use an environment that has the 761 Hangar Location data in it you can just enter a new Location as specified below. 1. Create new Location with underscore ( _ ) in its name such as TEST_LOC. Set the Type to OPERATING. Check the Is a Repair Facility? checkbox. 2. Set its parent as 761HANGAR1. 3. Give it Calendar DAY and Shift COMP1 as those are used on the GA-RF Work List 761_RF_DEMO. 4. Go to GA-RF and use 761_RF_DEMO. 5. Refresh the Work List so it sees the new Location. 6. Click on the Assignment View tab 7. Your new Location with the Underscrore should now be listed in the 761HANGAR1 hierarchy. 8. Drag one of the requrements down to the new location's row. CURRENT ERRONEOUS RESULT: It will turn green but when you save, it will go back up to the unassigned section instead of staying on the Location row where it should stay. When you look at the Assignment tab for the Work Order in WOTrack the Location Assignment will be blank. EXPECTED RESULT: The green bar should stay on the Location row where you placed it. The Location Assignment on the Assignment tab in WOTrack should be populated with the Location name and date/time and its status should be Assigned.
Local fix
(none)
Problem summary
**************************************************************** * USERS AFFECTED: * * Users of the Graphical Assignment Repair Facility * * application in Scheduler 7.6.5. * **************************************************************** * PROBLEM DESCRIPTION: * * LOCATION NAMES WITH UNDERSCORE CHARACTERS IN THEM PREVENT * * ASSIGNMENTS FROM BEING MADE. * **************************************************************** * RECOMMENDATION: * ****************************************************************
Problem conclusion
A code fix has been delivered to the stream.
Temporary fix
Comments
APAR Information
APAR number
IJ05195
Reported component name
MAXIMO SCHEDULE
Reported component ID
5724R46SE
Reported release
765
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2018-03-23
Closed date
2018-03-26
Last modified date
2018-03-26
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
Modules/Macros
MAXIMO
Fix information
Fixed component name
MAXIMO SCHEDULE
Fixed component ID
5724R46SE
Applicable component levels
R765 PSY
UP
[{"Business Unit":{"code":"BU059","label":"IBM Software w\/o TPS"},"Product":{"code":"SS9NUN","label":"Maximo Asset Management Scheduler"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"765","Edition":"","Line of Business":{"code":"LOB59","label":"Sustainability Software"}}]
Document Information
Modified date:
26 March 2018