II07766: INFO ITEMS FOR IMS SYSTEMS. PRIOR II02886 NEXT II08109 *CLOSED*FOR FUTURE UPDATES SEE THE "HTTP://WWW.IBM.COM/IMS" SUPPORT PAGE

APAR status

• Closed as canceled.

Error description

• ******************** JANUARY 10, 2002 **************************
  RETAIN INFORMATION ITEMS WILL NO LONGER BE USED TO DOCUMENT
  COMMON USER ERROR INFORMATION.  THE NEW PROCESS WILL RELAY THIS
  INFORMATION VIA THE SUPPORT PAGE WITHIN THE IMS HOME WEBSITE AT
          "HTTP://WWW.IBM.COM/IMS"
  CLICK ON THE "SUPPORT" KEYWORD IN THE LEFT MENU AREA.
  ****************************************************************
  568501201 568501201 568501301
  566540802 566540801 566540901 5740XY211 5740XX214 5740I1214
  5740I2214 HMK4102 HMH4102 JMH4112 JMJ4112 HMJ4102 JMJ4122
   HMK3102 HMH3102 HMH2202 HMH2102 HIM1304 JMH3112 JMH2213 JMH2110
   JMH1314 HMJ3102 JMH2223 JIM1324 JMH2273 JMH2233 JMH2130 JIM1334
   JMH2243 JMH2140 JIM1344 JMK3152 JMH2253 JMH2150 JIM1354 JMK3162
   JMH2263 JMH2160 JIM1364 JMK3112 JMK4152 JMK4162 JMK4112
  
  
  
   R102 R202 R304 R112 R213 R110 R314 R223 R120 R324 R273 R233 R13
   R334 R152 R253 R150 R354 R162 R263 R160 R364
   THIS APAR IS BEING CREATED AS AN EXTENTION TO II02886 AND
   II04204 II05221 AND II05470 TO DOCUMENT COMMON PROBLEMS IN THE
   SYSTEMS AREA OF IMS.  DIAGNOSTIC PROCEDURES AND/OR SOLUTIONS
   TO THESE PROBLEMS MAY BE INCLUDED.
     WHEN ADDING NEW ENTRIES, BE SURE TO FIRST ADD AN INDEX ITEM
   THAT BRIEFLY DESCRIBES THE PROBLEM SYMPTOMS AND THE PAGE ON
   WHICH THE FULL DESCRIPTION MAY BE FOUND.  INCLUDE YOUR NAME AND
   DATE AT WHICH TIME THE ENTRY IS MADE OR UPDATED.
   --------------  PROBLEM INDEX  --------------------------------
   1. ABEND0C4 DFSPRE10 CSECT DFSSYNTX                     PG. E 1
   2. MISC ABEND0C4 WITH PSB NAME DUE TO OVERLAY           PG. E2
   3. MNOTE G205 psb operand is omitted or invalid         PG. E3
   4. ABEND0C4 DFSCLM00 IMS 4.1                            PG. E4
   5. Doc update for sysdef messages g008 and g1211        PG. E5
   6. ABEND0C4 DFSCSIF0 on CLC instruction, R10 CSAB bad   PG. E7
   7. Callable Services LOAD Module function CSLDUSE       PG. E8
   8. UN53182 HOLD DOC CONTAIN INCORRECT INFORMATION       PG  E9
   9. DFSLI000 compatability between ims4.1 and ims3.1     PG  E9
  10. Abend0c4 in DFSCLM00 near label CLM00101.            PG E11
  11. ims310 and ims410 t2 svc compatability               PG E11
  12. abendu3058 attempting to install fastpath            PG E12
  13. MSGDFS3588W from dfsss000 during lgen for svcb       PG E13
  14. MSGIEW0241 during LGEN process                       PG E15
  15. Binder compatibility msgiew2652w msgiew2645w         PG E17
  16. Abendu0123 received when abendu0777 expected         PG E18
  17. Orphaned SP241 KEY7 storage for 216 bytes            PG E20
  18. MSGIEW0461 in LGEN caused by sequence numbers        PG E21
  19. ABENDU0581 in DFSIINV0 becaused incorrect JCLIN      PG E22
  20. Abend0c4 S0c4 DFSIDSP0 after label ITASKR90          PG E22
  21. ABENDU0240 when MPP accesses external datasets.      PG E23
  22. MSGIEW2303S and MSGIEW2677S during dbctl batch gen   PG E25
  23. DFSPZPxx assembler error - override value is null    PG E26
  24. Abendu0730 rc14 in IMS410 due to IMS310 of DFSPRRG0  PG E26
  25. MSGGIM24801W No applicable ++VER when receiving PTFS PG E27
  26. ABENDU3042 r15=05060024 in dfsespr0                  PG E28
  XX. FUTURE UPDATES WILL BE MADE WITHIN THE IBM SUPPORT
      WEBSITE AT "WWW.IBM.COM/IMS".  THE SUPPORT OPTION IS ON
      THE LEFT MENU.  (January 10, 2002)
  

Local fix

Problem summary

• 1. ABEND0C4 DFSPRE10 csect DFSSYNTX after label ADDNAME2 on
  EX instruction.  Reg4 is bad, and we get it from reg6 which
  should be the address of PARSVAL.  R6 points to instructions
  within another module.  This problem was caused by a user who
  entered blanks after the TRANSACTION CODE= parm on the TRANSACT
  macro - i.e. TRANSACTION CODE=(    ,followed by valid parms).
  ************************************PILETIC 4/11/94************
  2.  Misc. random 2 word overlay with data containing psb
  names.  ABEND0C4 ABEND0C1 ABEND0CX received because of
  the overlays.  UCB and CNT control blocks hit as well
  as module overlays.  Abending pgms include dfsrcp30, dfsrlp00
  and dfsicl70.  This is caused by boole and babbage db2
  manager monitor package.
  Additional symptoms include abendu0168 during restart
  because of the bad cnt blocks checkpointed.  This caused
  a coldcom restart to be done.
  ***********************************BUTTERWECK 4/14/94*******
  

Problem conclusion

• 3.  MNOTE g205 psb operand is omitted of invalid, received
  when specifying a psb name beginning with dfs or dbcdm
  (excluding DFSSAM and dfsivp) for ims4.1  This is an
  ims4.1 restriction on psb name.  Updates to the manuals
  have been requested. ims410
  ***********************************BUTTERWECK 4/15/94*******
   4. ABEND0C4 in DFSCLM00 after label CLM00400 on CDS
      instruction. REG4 is bad = x'00000010'. This problem
      is caused by OEM BMC's Database Itegrity Plus (DI+).
      Their tracking # is 204095 and the PTF's are: BP43670,
      BP43671, BP43672, BP46611, BP46612 and BP46613.
  ***********************************JENNINGS 4/19/94*********
  5.  The following pub updates have been requested to the
  ims4.1  Messages and Codes Manual sc26-3071 chapter 8:
  Change g008 to the following:
  G008   LGEN ASSEMBLE EXECUTION NOT FROM THE PREPROCESSOR.
    Explanation:  One of the following occurred:
     .  A LGEN/MODBLKS or LGEN/MSVERIFY sysgen assembly was
        attempted without using the preprocessor.  The
        preprocessor must be invoked to build the assembly input
        and to call the assembler.
     .  Assembler listing control instructions (such as PRINT OFF)
        imbedded in the stage 1 source.
    System Action:  The assembly fails.
  Programmer Response:  Change the job step JCL to execute the
  preprocessor rather than the assembler or modify the stage 1
  source removing the assembler listing control instructions (i.e
  PRINT OFF) and rerun the stage 1.
  
  Severity:  4
  
  *
  Add the following message:
  G1211 ETO DESCRIPTORS ARE NOT BUILT IN A LGEN SYSGEN.
  
  Explanation: ETO descriptors are not built in a LGEN sysgen.
  - A severity 2 warning message is issued when ETO descriptors
    are requested along with the sysgen, i.e.
    ETOFEAT=(YES,YES,ALL). A severity 4 error message is issued
    when only ETO  descriptors are requested in a LGEN sysgen,
    i.e. ETOFEAT=(YES,YES,ONLY)
  
  System Action: For the warning message, processing continues.
  For the error message, the stage 1 will not complete
  successfully.
  Programmer Action: Change the ETOFEAT keyword of the IMSCTRL
   macro to not request the building of the ETO descriptors.
  
  Severity: 2 or 4
  ****************************** Butterweck 4/28/94 ********
  6. ABEND0C4 in callable services module DFSCSIF0 on CLC
     instruction when referencing R10 ( CSAB ).  The error
     occurs on the second consecutive callable services request.
     On the second call, the token (first word of CS PARM LIST)
     has been destroyed.  There are two ways to code the second
     call to fix this.
     a. When intializing the parm list for the second (and
        subsequent calls under the same initilization), save
        the token ( CSPTOKN ) somewhere and then put it back
        prior to the call to DFSCSIF0.
     b. Don't clear the first word (token) from the parm list
        when initializing it for the second call.
  **********************************PILETIC 05/04/94**********
  7. When using Callable Services LOAD Module function and you
  want to load the existing copy of a module, CSLDUSE = CSLDUOLD
  and the module must be either reentrant or reusable.  If it
  is not linkedited with RENT or REUS attributes, you will get
  a new copy of the module even if CSLDUOLD is requested.
  **********************************PILETIC 05/04/94**********
  8. PTF UN53182'S HOLD DOC Refered to IMS 3.1 UTILITIES
  REFERENCE Manual SC26-4284-01 Page 628 was incorrect.  It
  should be either Page 618 for SC26-4284-01 or Page 628 for
  SC26-4284-00.
  *****************************Alan K. Ho 05/04/94************
  9.  The IMS/ESA 4.1 Migration Guide ( GG24-4150-00 )
  under Fallback Considerations states 'That the ims4.1
  language interface (dfsli000) module cannot be executed on the
  previous releases of IMS.  Any application programs that are
  link-edited with the ims 4.1 Language Interface Module cannot
  be executed on the old IMS release'.
  *
  This is true if new functions introduced in ims 4.1 are being
  used by the application program (i.e. cee or ess
  interface).  If these new functions are NOT being used then
  the ims 4.1 language interface module is compatible with ims
  3.1.
  ***************************** Butterweck 5/5/94 **********
  10. An abend0c4 occurs in DFSCLM00 +x'6c' near label CLM00101
  when R8 is zero. This happens when DFSCLM00 is called by
  DeltaIMS (VTF prefix) and the parmlist +x'c' is zero. Prob
  is fixed in V5.02.3
  +++++++++++++++++++++++++++++ Compton 5/16/94 +++++++++++++
  11.  The ims t2 svc dfsvc200 is downward compatible between
  ims410 and ims310 (i.e. you can use the ims410 t2 svc on
  an ims310 system).  The reverse is not true however, you
  cannot use the ims310 t2 svc with an ims410 system. If you
  do so the results are unpredictible (apar pn28971 introduced
  changes that will cause an abend0c4 in module dfsvci00
  in this situation). One 0c4 occurred at x'2ea' on MVC.
  *********** Butterweck 5/18/94 - mod. Bullinger 3/13/95 *******
  12. abendu3058 can occur when some modules are assembled
  with fastpath and some modules are assembled without
  fastpath.  Adding fastpath to a system not only adds
  additional modules it also modifies some common modules
  such as dfsask00.  If modules genned without fastpath are
  used (i.e. the non fastpath modules are in lpalib and lpalib
  is accessed before steplib) this abend can occur.
  ***************************** Butterweck 5/18/94 **********
  13.  The following is received running the lgen sort split
  program dfsss000 :
  DFS3588W- EXPECTED END RECORD NOT FOUND AT  INPUT RECORD
  location 000     0056 RESOURCE TYPE = SCVB RETURN CODE = 4
  This may be caused when using acf ( acf2 ) security.  This
  is a know acf2 problem - contact the vendor for the fix.
  ts94039 - acf fix number
  Additional keywords:  msgdfs3588W rc(04) rc04 stage2 sysgen
  ****************************** Butterweck 5/20/94 ********
  14. MSGIEW0241 received during an IMS 3.1 LGEN might cause
  by pointing to an IMS 4.1 reslib.  Since there are a big
  difference between IMS 3.1 and 4.1 LGEN process.  The way to
  identify this possibility of error is to compare OCNTX01x in
  LGENOUT between a good lgen and a bad one.  The following are
  the first few lines of good OCNTX011 and bad OCNTX012 :
  
  BROWSE -- IMSVS.LGENOUT(OCNTX011) ----
           GBLB  &GBASLAST
  &GAMSTR  SETA  025893
  &GASMSTR SETA  030109
  &GAWTOR  SETA  041228
  &GBASLAST SETB 1
  &GALCNT   SETA 046202
  &GATCNT   SETA 046202
  OCNTX011 CSECT                     RECORD GENERATED BY DFSSS040
  
   BROWSE -- IMSVS.LGENOUT(OCNTX012) --------
           GBLA  &GATCNT,&GARTOT
           LCLC  &LCMODC
  &LCMODC  SETC  '0'
  &GATCNT  SETA  046474
  &GARTOT  SETA  000000
           DFSCNT GEN,MASTER,SLAVE,LGEN,4,01
  
  You will notice OCNTX011 had a Csect statement but not in
  OCNTX012 (IMS4.1 does not generate the Csect in this step) which
  caused linkage editor add $PRIVATE csect and instead of replace
  the csects in OCNTX012, the linkage editor just add the csects
  and result of msgiew0241.
  Keywords : iew0241, rc04, rc=04linkage editor
  ******************************** ALAN K. HO  06/06/94 ********
  15.  msgiew2652w and msgiew2645w resulting in rc04
  from stage2 sysgen during linked processing ( iewl ).
  These messages will be received after the binder compatability
  service is on the sms binder but the corresponding ims service
  is not on.  This will occur when compat=pm1 is specified or
  defaulted to without the corresponding ims service.  This
  item will be updated to include apar numbers when they
  are available.  rc(04) rc=04 iew2652 iew2645
  ******************************** J. Butterweck 06/07/94 ******
  16. Abendu0123 received when abendu0777 expected when APPC
  is not active.  This only happens when APPC=YES on startup
  26. MSGGIM44402W indicating dfsixv79 not assembled when
  processing un22414.  This message can be ignored and will
  allow smpe processing to continue.  DFSIXV79 contains help
  text and does not get assembled.  This message is expected.
  It will be received whenever a members in the ivp libraries
  are processed.
  *************************** Butterweck 08/08/94 **********
  27. MSGIEW2454W (for binder) and/or MSGIEW0461I (linkage
  editor) indicating unresolved external references cause rc(04)
  during accept processing.  This is expected for accept
  processing and should be ignored.  These messages are NOT
  ok when processing via apply or stage 2 ( stage2 ) of
  sysgen.
  ************************** Butterweck 08/08/94 ***********
  parameter.  This may occur when module ATBEXAI does not
  exist in SYS1.CSSLIB library.  This extract exit must reside
  in this library to determine whether a CPI-C CPIC conversation
  was allocated.  The missing module may also cause other
  unwanted abends as follows:
    Abendu2478 expected, but abendu0124 received.
    Abendu3303 expected, but abendu0125 received.
    Abendu2479 expected, but abendu0126 received.
  ================================ A. Bullinger 6-21-94 =========
  SP241 KEY7 storage may be orphaned in 216 byte chunks and have
  an eyecatcher of an IMS DB name (in one case it was a FP DB
  name).  There were no other eyecatchers.  Problem occurred
  using BMC's Secondary Index Trace facility and they have a fix
  for it.  BMC module DSIXPST3 was involved.
  ***********************************Piletic 06/24/94************
  18. IEW0461 can be iussed during LGEN stage 2 if the input to
  SORT/SPLITTER contain sequence numbers. The sequence numbers
  caused the sort/splitter to output invalid statement to
  LGENOUT.  It resulted the module/macro assemble incorrectly and
  might missing some entries.  Referred to SDR manaul under LGEN
  process stage 2 input for restriction of Sort-Splitter.
  ********************************* Alan k. Ho 06/30/94 *********
  19. ABENDU0581 might occurred, if an incorrect version of JCLIN
  or no JCLIN being run again the target csi after a sysgen.
  The NCNT field of DFSISCD0 in the dump and the value of CNT=
  of DFSISCD0 in stage 2 should be equal if the JCLIN is in
  synch.  Otherwise, a JCLIN need to be run again target csi
  before apply any maintenances to the target zone.
  ********************************** Alan K, Ho  06/30/94********
  20.  Abends0c4 received after label ITASKR90 pic4 on an OI
  instruction within the LEAVE macro.  The address pointed to
  by r13 contains a word of zeroes.  This is a known Sterling
  Software, IMSHRINK problem.  The problem appears to occur after
  an ISWITCH and after IMSHRINK goes into a wait.  The problem
  is fixed by upgrading the OEM product to 5.2.4 from 5.2.3 or
  lower.  The fix is also reported to fix abend0c1.  Reported
  under IMS310 release.
  Additional symptoms:  Also showed up as an abendu0780 rc03 rc3
  in an IMS410 release with a prior abend0c4.
  ================================== A. Bullinger 7-5-94 ========
  21.  ABENDU0240 when external MVS datasets / files are accessed
  by a MPP.  "External" in this case means external to the DL/1
  environment.  Message Processing Programs(MPPs) accessing
  external MVS datasets / files is not supported.  The
  IMS/ESA V3 Programming Design Guide, SC26-4279, chapter 3a,
  provides the types of data, input/output, a MPP can access.
  MVS datasets / files are not included.
  Additional considerations:
  a: MPP access to MVS datasets / files does work but is
     suseptable to abendu0240 if the STIMER option on the MPR
     EXEC statement parameter is set to 1 or 2.
  b: ABENDU0240 can be prevented by disabling timing by
     specifing STIMER=0.
  c: Usually, the root cause of the ABENDU0240 is that MVS
     dataset / file services such as dynamic allocate (SVC99)
     and CLOSE also issue a STIMER and only one STIMER should
     be issued for a task.  Additional detail can be found
     in PP23968 and 0E816,PK5,000.
  ================================== Earl Hale 07/13/94 =========
  22.  MSGIEW2303S AND MSGIEW2677S received for dfsatch0,
  dfssdlc0, dfskldli, and dfsirac0 causing rc(12) during
  linkedit ( lked ) when running a sysgen specifying
  'batch,dbctl' on the imsctrl macro for ims410.  This problem
  can be circumvented by specifying 'batch,db/dc'.  This problem
  has been corrected in ims510
  ================================= Butterweck 07/15/94 =======
  23. The DRA startup parameter table module DFSPZPxx pick up
  all the default valules from DFSPRP macro.  No override parm
  keywords were shipped with DFSPZPxx.  If any default value
  need to be overrided, user must specify a value in parameter
  keyword in DFSPZPxx.  A null value in the parameter will cause
  an assembler error.
  For example :   CNBA=0 - is a valid keyword
                  CNBA=, - will cause assembler error IEV074
  ============================ Alan K. Ho  7/18/94 ============
  24. Customer running IMS410 and getting abendu0730 subcode 14
  due to an improper library concatenation causing an IMS310
  version of DFSPRRG0 to be picked up.  Customer has SPM
  parameter in start up proc specified as ( SPM=, ) and does
  not want to use the DFSSPMxx member.
  Additional symptom: Abend878 abends878 rc14 - For a complete
  description see PDDB entry CXJSK via ASKQ.
  +++++++++++++++++++++++++++++++++ A. Bullinger 7-18-94 +++++++
  25. MSGGIM24801W and " NO APPLICABLE ++VER " is received
  while attempting to perform SMP RECEIVE for IMS PTFs.
  This can occur if the SREL P115 is not present in the GLOBAL
  ZONE or the IMS FMIDs have been wiped out of the GLOBAL ZONE.
  Simply add the correct IMS FMIDs and SRELs to the GLOBAL
  ZONE to fix the problem using the SMP dialog.
  ********************************* Jeff Maddix 08/02/94 ********
  26. Abendu3042 r15(05060024) in dfsespr0 can be caused by
  db2 library dsnload not being authorized.
  ********************************** J Butterweck 12/06/94 ****
  

Temporary fix

Comments

• Information APAR II07766
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels