HE04358: SKETCH: THE NO 3D BACKGROUND OPTION SHOULD WORK IRRESPECTIVE WHE THER THE LOW-LIGHT OF THE COMPONENT THAT DOES NOT BELONG TO T

APAR status

• Closed as program error.

Error description

• Scenario:
  1) Open the Specific CATPart with two pads and two sketches.
  2) Enter into any of the sketch.
  3) In the  Skecther workbench select the ???No 3D background???
  option in Visu3D toolbar.
  4) The 3D geometries in the background are hidden and only
  the sketch is visible.
  5) Now come out of the sketch by exiting the workbench.
  6) Now enter the sketch again.
  7) The ???No 3D background??? option is working and one can only
  
  view the sketch. There are no 3D entities.
  8) Now come out of the Sketch again and goto
  Tools>Options>ProductStructure>Product Structure
  9) Check the  "Low-light of the component that does not
  belong to the active level". Option
  10) Now enter the SAME sketch again.
  11) It should have the ???No 3D background??? activated. But the
  n
  all the 3D geometries are visible.
  12) Set it again to No 3D background.
  13) Come out of the sketch
  14) Enter the SAME sketch again.
  15) The ???No 3D background??? option is not activated and again
  
  the 3D geometries are seen ??? THIS IS PROBLEM
  EXPECTED RESULT: The option No 3D background should be
  persistent as it is, whether the option activated in step 9
  is checked or unchecked.
  

Local fix

• empty
  

Problem summary

• Scenario:
  1) Open the Specific CATPart with two pads and two sketches.
  2) Enter into any of the sketch.
  3) In the  Skecther workbench select the ?No 3D background?
  option in Visu3D toolbar.
  4) The 3D geometries in the background are hidden and only
  the sketch is visible.
  5) Now come out of the sketch by exiting the workbench.
  6) Now enter the sketch again.
  7) The ?No 3D background? option is working and one can only
  view the sketch. There are no 3D entities.
  8) Now come out of the Sketch again and goto
  Tools>Options>ProductStructure>Product Structure
  9) Check the  "Low-light of the component that does not
  belong to the active level". Option
  10) Now enter the SAME sketch again.
  11) It should have the ?No 3D background? activated. But then
  all the 3D geometries are visible.
  12) Set it again to No 3D background.
  13) Come out of the sketch
  14) Enter the SAME sketch again.
  15) The ?No 3D background? option is not activated and again
  the 3D geometries are seen ? THIS IS PROBLEM
  EXPECTED RESULT: The option "No 3D background" should be
  persistent as it is, whether the option activated in step 9
  is checked or unchecked.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION V5R22 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R21 SP1.
  Additional Closure Information:
  Incident Diagnosis:The ?No 3D background? option should work
  irrespective whether the "Low-light of the component that
  does not belong to the active level". Option is checked or
  unchecked in Tools>Options>ProductStructure>Product Structure
  Correction explanation: The problem now doesnt occur.
  Possible by-pass and/or correction limitation:No
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R521 PSN SP52101

     UP11/07/18 I 1000